Toyota sequoia 2013 Owner's Manual

page of 725

/ 725
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

TABLE OF CONTENTS

Before driving

When driving

Interior

features

Maintenance

and care

When trouble

arises

Vehicle

specifications

For owners

Index

Adjusting and operating features such as door locks,

mirrors, and steering column.

Driving, stopping, and safe-driving information.

Air conditioning and audio systems, as well as other in-

terior features for a comfortable driving experience.

Cleaning and protecting your vehicle, performing do-it-

yourself maintenance, and maintenance information.

What to do if the vehicle needs to be towed, gets a flat

tire, or is involved in an accident.

Detailed vehicle information.

Reporting safety defects for U.S. owners, and seat belt

and SRS airbag instructions for Canadian owners.

Alphabetical listing of information contained in this

manual.

Table of Contents

Summary of Contents for Toyota sequoia 2013

Page 1 TABLE OF CONTENTS Adjusting and operating features such as door locks, Before driving mirrors, and steering column. When driving Driving, stopping, and safe-driving information. Interior Air conditioning and audio systems, as well as other in- features terior features for a comfortable driving experience. Maintenance Cleaning and protecting your vehicle, performing do-it- and care...
Page 2 Pictorial index Exterior Windshield wipers P. 196 ∗ Moon roof P. 99 Hood Outside rear view P. 564 mirrors P. 87 Front side marker lights P. 188 Headlights (low beam) P. 188 ∗ Fog lights P. 194 Headlights (high beam) P.
Page 3 Stop/tail and rear side marker lights P. 188 Roof luggage Tail lights P. 188 ∗ carrier P. 91 Rear window defogger P. 314 Fuel filler door P. 102 Back window P. 96 Side doors Rear window P. 37 wiper P. 200 License plate Tires lights...
Page 4 Pictorial index Interior Seat belts P. 72 Front console box P. 485 Head restraints P. 68 Horn P. 168 Bottle holders P. 501 SRS driver airbag P. 114 Cup holders P. 497 SRS front passenger airbag P. 114 Auxiliary boxes P.
Page 5 Personal/interior lights P. 480 Type A ∗ Moon roof switches Personal/interior lights P. 99 P. 480 Overhead console Rear seat entertainment ∗ P. 495 system P. 387 Conversation mirror SRS curtain shield P. 511 airbags P. 114 Assist grips Personal/interior P.
Page 6 Pictorial index Interior Type B Personal/interior Personal/interior lights lights P. 480 P. 480 Rear seat entertainment Overhead console ∗ system P. 387 P. 495 SRS curtain shield Conversation mirror airbags P. 114 P. 511 Personal/interior Assist grips lights P. 480 P.
Page 7 Driving position memory Inside door lock Door lock switch ∗ switches P. 37 P. 65 button P. 38 Power window Auxiliary box Window lock switches switch P. 93 P. 502 P. 93 ∗ : If equipped...
Page 8 Pictorial index Interior Cup holders P. 497 Ashtray P. 509 Shift lever P. 162 Map holder P. 488 Shift lock override button P. 663...
Page 9 Vehicles without rear seat entertainment system Rear air conditioning system P. 310 Cup holders P. 497 Power outlet P. 512...
Page 10 Pictorial index Interior Vehicles with rear seat entertainment system A/V input port Rear air conditioning P. 447 system P. 310 Cup holders P. 497 Power outlet P. 512 Headphone jacks P. 395...
Page 11 Vehicles with rear console box Rear console box P. 492 Cup holders P. 497 Cup holders P. 497 Seat heater switches Auxiliary box P. 502 P. 519...
Page 12 Pictorial index Instrument panel Headlight switch P. 188 Turn signal lever P. 166 ∗ Fog light switch P. 194 Gauges and meters P. 169 Windshield wipers and washer switch P. 196 Rear window wiper and washer switch P. 200 Tire pressure warning reset switch P.
Page 13 Audio system P. 319 Rear window defogger switch/ Rear window defogger and outside rear Navigation system ∗ view mirror defogger switch P. 314 ∗ Security indicator Windshield wiper de-icer P. 316 P. 107, 109 Accessory meter P. 185 Air conditioning system P.
Page 14 Pictorial index Instrument panel Emergency flasher switch P. 624 Accessory meter ∗ control switches P. 185 Multi-information display Intuitive parking assist control switches P. 179 ∗ switch P. 221 Front wheel drive control switch P. 248 Coin holder P. 484 Center differential lock switch P.
Page 15 Power back window switch P. 96 Engine (ignition) switch VSC OFF switch P. 253, 256, 258, 259 P. 159 ∗ : If equipped : 4WD models : 2WD models : Vehicles with multi-information display...
Page 16 Pictorial index Instrument panel ∗ Audio remote control Climate remote control Talk switch ∗ ∗ switches switches P. 317 P. 368 P. 453 ∗ Telephone switches Vehicle-to-vehicle Cruise control P. 453 ∗ distance button switch P. 203, 207 P. 207...
Page 17 Personal/interior light Tilt and telescopic steering ∗ main switch P. 479 control switch P. 83 Outside rear view Instrument panel light mirror switches control dial P. 87 P. 173 ∗ BSM main switch Tilt and telescopic steering P. 236 ∗ lock release lever P.
Page 18: Luggage Compartment
Pictorial index Luggage compartment Shopping Seatback folding/ bag hook Power outlet returning switches P. 532 P. 512 P. 63 Power back Back door Child restraint Shopping ∗ door switch strap anchor bracket bag hook P. 43 P. 44 P. 136 P.
Page 19: For Your Information
Accessories, spare parts and modification of your Toyota A wide variety of non-genuine spare parts and accessories for Toyota vehicles are currently available in the market. You should know that Toyota does not warrant these products and is not responsible for their performance, repair, or replacement, or for any damage they may cause to, or adverse effect they may have on, your Toyota vehicle.
Page 20 ● Anti-lock brake system ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or spe- cial instructions regarding installation of a mobile two-way radio system. Vehicle data recordings Your Toyota is equipped with several sophisticated computers that will record certain data, such as: •...
Page 21: Event Data Recorder
EDR. ● Disclosure of the EDR data Toyota will not disclose the data recorded in an EDR to a third party except when: • An agreement from the vehicle’s owner (or the lessee for a leased vehicle) is obtained •...
Page 22 Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle.
Page 23 CAUTION General precautions while driving ■ Driving under the influence: Never drive your vehicle when under the influ- ence of alcohol or drugs that have impaired your ability to operate your vehi- cle. Alcohol and certain drugs delay reaction time, impair judgment and reduce coordination, which could lead to an accident that could result in death or serious injury.
Page 24 This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your Toyota and its equipment.
Page 25 Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 664)
Page 26 1-2. Opening, closing and locking the doors Wireless remote control The wireless remote control can be used to lock and unlock the vehi- cle from outside the vehicle. Vehicles with power back door Locks all doors Unlocks all doors Pressing the button unlocks the driver’s door.
Page 27 1-2. Opening, closing and locking the doors Panic mode ■ When is pushed for longer than about one second, an alarm will sound for about 60 seconds and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, push any button on the wireless remote control.
Page 28 Customization ■ That can be configured at Toyota dealer (vehicles without multi-informa- ● tion display) Settings (e.g. wireless remote control) can be changed.
Page 29 1-2. Opening, closing and locking the doors Certification for wireless remote control ■ MODEL/FCC IDs: Transmitter: GQ43VT20T Receiver: GQ4-34R IC (Canada) IDs: Transmitter: 1470A-1T Receiver: 1470A-6R MADE IN U.S.A. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Page 30 1-2. Opening, closing and locking the doors Side doors The vehicle can be locked and unlocked using the wireless remote control, key or door lock switch. Wireless remote control ■ →P. 33 ■ Locks all doors Closes the windows and moon roof (turn and hold) Unlocks all doors Turning the key unlocks the...
Page 31 1-2. Opening, closing and locking the doors Inside lock button ■ Locks the door Unlocks the door Pulling the door handle can open the front door even if the lock button is in the lock posi- tion. Locking the front doors from the outside without a key Move the inside door lock button to the lock position.
Page 32 1-2. Opening, closing and locking the doors Rear door child-protector lock The door cannot be opened from inside the vehicle when the lock is set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
Page 33 1-2. Opening, closing and locking the doors Setting and canceling the functions ■ Vehicles with multi-information display →P. 182 Vehicles without multi-information display To switch between setting and canceling, follow the procedure below: Close all the doors and turn the engine switch to the ON posi- tion.
Page 34 1-2. Opening, closing and locking the doors When locking the doors using the key ■ The door cannot be locked if the key is in the engine switch. Key reminder buzzer ■ A buzzer sounds if the driver’s door is opened, while the engine switch is in the ACC or LOCK position to remind you to remove the key.
Page 35 1-2. Opening, closing and locking the doors Back door The back door can be locked/unlocked and opened by the following procedures. Locking and unlocking the back door ■ Unlocks all doors Opens the back window (turn and hold) Locks all doors Closes the back window (turn and hold) Door lock switches...
Page 36 1-2. Opening, closing and locking the doors Opening the back door from inside the vehicle (vehicles ■ with power back door) Push and hold the switch to open/close. Power back door switch (vehicles with power back door) Push and hold the switch to close.
Page 37 1-2. Opening, closing and locking the doors Rear step bumper For rear end protection and eas- ier step-up loading. To get on the rear step bumper, use the shaded area in the illus- tration. Back door strap ■ Use the strap when closing. The power back door can be opened when ■...
Page 38 While the power back door is opening automatically, applying excessive force to it will stop the opening operation to prevent the power back door from rapidly falling down. Customization that can be configured at Toyota dealer ■ Settings (e.g. power back door) can be changed.
Page 39 1-2. Opening, closing and locking the doors CAUTION Operating the back door ■ Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in death or serious injury. Remove any heavy loads, such as snow and ice, from the back door ●...
Page 40 When installing an accessory part to the back door, using a genuine Toyota part is recommended. Back door closer (vehicles with a power back door) ■...
Page 41 When installing an accessory part to the back door, using a genuine Toyota part is recom- mended. Jam protection function (vehicles with a power back door) ■...
Page 42 ● gloves or other fabric items. Do not attach any accessories other Damper stay rod ● than genuine Toyota parts to the back door. Do not place your hand on the damper ● stay or apply lateral forces to it.
Page 43 1-3. Adjustable components (seats, mirrors, steering wheel) Front seats Manual seat Passenger’s seat Driver’s seat Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever Seat cushion (front) angle adjustment knob Seat lumbar support adjustment switch...
Page 44 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Passenger’s seat Driver’s seat Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch Vertical height adjustment switch Driver’s seat leg support adjustment switch (if equipped) Seat lumbar support adjustment switch...
Page 45 1-3. Adjustable components (seats, mirrors, steering wheel) Seatback table (if equipped on front passenger seat) Pull the seatback angle adjusting lever and raise the seatback to its upright position. Pull the seatback folding lever and fold the seatback down.
Page 46 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Seat adjustment ■ Be careful that the seat does not hit passengers or luggage. ● Do not recline the seat more than necessary when the vehicle is in motion ● to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of...
Page 47 1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats Second seats ■ Separated seat Seat position adjustment lever Seatback angle adjustment lever...
Page 48 1-3. Adjustable components (seats, mirrors, steering wheel) Bench seat Seat position adjustment lever Seatback angle adjustment lever :The second center seat can be moved forward further than side seats.
Page 49 1-3. Adjustable components (seats, mirrors, steering wheel) Third seats ■ Manual seat Seatback angle adjustment lever...
Page 50 1-3. Adjustable components (seats, mirrors, steering wheel) Power seat Seatback angle adjustment switch Seatback folding/returning switch Moving a second seat for third seat access Getting in the vehicle ■ Pull up the lever and fold down the seatback. The seat will slide forward.
Page 51 1-3. Adjustable components (seats, mirrors, steering wheel) Getting out of the vehicle ■ Depress the release pedal and fold down the seatback. The seat will slide forward. Move the seat to the front-most position Make sure that no passenger is seated on the second seat before depressing the release pedal.
Page 52 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the second seat ■ Separated seat Pull the lever to unlock the seat- back and then fold the seatback down. Bench seat Pull the lever to unlock the seat- back and then fold the seatback down.
Page 53 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seat Before folding down the third seat ■ To release the hooked end tab, insert the key or concaved end tab into the hole on the buckle. Retract the belt slowly when releasing and stowing the seat belt.
Page 54 1-3. Adjustable components (seats, mirrors, steering wheel) Adjust the center head restraint to the downmost position. Stow the third seat belt buckles.
Page 55 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seat (manual seat) ■ Pull the head restraint lock release lever to fold the head restraint. Pull the lever to unlock the seatback and then fold the seat- back down. From rear door side From back door side...
Page 56 1-3. Adjustable components (seats, mirrors, steering wheel) Folding down the third seat (power seat) ■ From rear door side Press and hold the seatback folding switch until the seatback folds down fully and the buzzer sounds. The outside head restraints are folded automatically.
Page 57 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION When adjusting a rear seat ■ Be careful that the seat does not hit passengers or luggage. ● Do not recline the seat more than necessary when the vehicle is in motion ●...
Page 58 1-3. Adjustable components (seats, mirrors, steering wheel) ∗ Driving position memory (driver’s seat) Your preferred driving position (the position of the driver’s seat, steering wheel and outside rear view mirrors) can be entered into the computer’s memory and recalled with the touch of a button. Two different driving positions can be entered into memory.
Page 59 1-3. Adjustable components (seats, mirrors, steering wheel) Linking driving position memory with door unlock operation Memorized driving positions can be recalled when you unlock the driver’s door using the wireless remote control and open the driver’s door. Setting the linked door unlock operation ■...
Page 60 1-3. Adjustable components (seats, mirrors, steering wheel) Retained accessory power ■ Each memorized position (except for the tilt and telescopic steering column) can be activated within 30 seconds after the driver’s door is opened, even if the key is not in the engine switch. If any position memory button is pushed while the adjustments are ■...
Page 61 1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints Head restraints are provided for all seats. Front seats Vertical adjustment Pull the head restraints up. Down Push the head restraint down while pushing the lock release Lock release button button. Second center and outside seats Vertical adjustment...
Page 62 1-3. Adjustable components (seats, mirrors, steering wheel) Third outside seats To use Lift up the head restraint until it locks. To fold Pull the head restraint lock release lever to fold the head restraint. Removing the head restraints ■ Front seats Pull the head restraint up while pushing the lock release button.
Page 63 1-3. Adjustable components (seats, mirrors, steering wheel) Third seats Pull the head restraint up while pushing the lock release button. The head restraint of outside seat can- not be removed. Installing the head restraints ■ Front seats Align the head restraint with the installa- tion holes and push it down to the lock position.
Page 64 1-3. Adjustable components (seats, mirrors, steering wheel) Adjusting the height of the head restraints (front and second outside ■ seats) Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. Adjusting the center seat head restraint ■...
Page 65 1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. Correct use of the seat belts ■ ● Extend the shoulder belt so that it comes fully over the shoulder, does come into contact with the...
Page 66 1-3. Adjustable components (seats, mirrors, steering wheel) Releasing the belt Press the release button. Adjusting the height of the belt ■ Down Move the height adjuster up and down as needed until you hear a click.
Page 67 1-3. Adjustable components (seats, mirrors, steering wheel) Third center seat belt The third center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation. Make sure that the buckle securely latched for ready use of the center seat belt.
Page 68 1-3. Adjustable components (seats, mirrors, steering wheel) Stow the seat belt tabs in the cover set in the roof as shown. Extracting the belt ■ Pull the belt out partially, and then remove the tabs from the cover. Seat belt comfort guide (third center seat) If the shoulder belt sits close to a person’s neck, use the seat belt comfort guide.
Page 69 1-3. Adjustable components (seats, mirrors, steering wheel) Slide the belt past the slot of the guide. The elastic cord must be behind the seat belt. Seat belt pretensioners (front seats) The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal...
Page 70 1-3. Adjustable components (seats, mirrors, steering wheel) Emergency locking retractor (ELR) ■ The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.
Page 71 Each seat belt should be used by one person only. Do not use a seat belt ● for more than one person at once, including children. Toyota recommends that children be seated in the rear seat and always ● use a seat belt and/or an appropriate child restraint system.
Page 72 If the pretensioner has activated, the SRS warning light will come on. In ● that case, the seat belt cannot be used again and must be replaced at your Toyota dealer. Seat belt damage and wear ■ Do not damage the seat belts by allowing the belt, plate, or buckle to be ●...
Page 73 Ensure that the belt and tab are locked and the belt is not twisted. ● If the seat belt does not function correctly, immediately contact your Toyota dealer. Replace the seat assembly, including the belts, if your vehicle has been ●...
Page 74 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Using a seat belt extender ■ Do not wear the seat belt extender if you can fasten the seat belt without ● the extender. Do not use the seat belt extender when installing a child restraint system ●...
Page 75 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel (manually adjustable type) The steering wheel can be adjusted to a comfortable position. Hold the steering wheel and press the lever down. Adjust to the ideal position by moving the steering wheel horizontally and vertically.
Page 76 1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel (power-adjustable type) The steering wheel can be adjusted to a comfortable position. Down Toward the driver Away from the driver Auto tilt away When the key is removed from the engine switch, the steering wheel returns to its stowed posi- tion by moving up and away to enable easier driver entry and...
Page 77 1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror Glare from the headlights of vehicles behind can be reduced by using the following functions. Manual anti-glare inside rear view mirror Normal position Anti-glare position...
Page 78 1-3. Adjustable components (seats, mirrors, steering wheel) Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and automatically reduces the reflected light. Turns automatic mode ON/ The indicator comes on when automatic mode is turned on.
Page 79 1-3. Adjustable components (seats, mirrors, steering wheel) To prevent sensor error (vehicles with auto anti-glare inside rear view ■ mirror) To ensure that the sensors operate prop- erly, do not touch or cover them. If a sun visor interferes with the mirror ■...
Page 80 1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors Mirror angle can be adjusted using the switch when the engine switch is in the ACC or ON position. Select a mirror to adjust. (L: left or R: right) Adjust the mirror up, down, in or out using the switch.
Page 81 1-3. Adjustable components (seats, mirrors, steering wheel) From inside (if equipped) Press the switch. Pressing again will unfold the mir- rors. Linked mirror function when reversing (if equipped) Press the switch to turn on/off linked mirror function. The outside rear view mirrors will automatically tilt downwards...
Page 82 1-3. Adjustable components (seats, mirrors, steering wheel) When the mirrors are fogged up (vehicles with outside rear view mirror ■ defoggers) Turn on the mirror defoggers to defog the mirrors. (→P. 314) Automatic adjustment of the mirror angle (vehicles with driving posi- ■...
Page 83 1-3. Adjustable components (seats, mirrors, steering wheel) NOTICE If ice should jam the mirror ■ Do not operate the control or scrape the mirror face. Use a spray de-icer to free the mirror.
Page 84 1-3. Adjustable components (seats, mirrors, steering wheel) ∗ Roof luggage carrier Roof rails Cross rails Adjustment the position of cross rails Turn the knobs counterclockwise to loosen the cross rails. Slide the cross rails to the appro- priate position for loading lug- gage.
Page 85 1-3. Adjustable components (seats, mirrors, steering wheel) CAUTION Cross rail adjustment ■ Make sure the cross rails are locked securely by applying pressure forward and rearward. Failure to do so may cause an accident, death or serious injury in the event of emergency braking or a collision.
Page 86 1-4. Opening and closing the windows and moon roof Power windows The power windows can be opened and closed using the following switches. Closing One-touch closing (Front windows only) Opening One-touch opening (Front windows only) : To stop the window partway, operate the switch in the oppo- site direction.
Page 87 If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
Page 88 1-4. Opening and closing the windows and moon roof Customization that can be configured at Toyota dealer ■ Settings (e.g. power windows) can be changed. (Customizable features →P. 703) CAUTION Closing the windows ■ Observe the following precautions. Failing to do so may result in death or serious injury.
Page 89 1-4. Opening and closing the windows and moon roof Power back window The power back window can be opened and closed using the switch and key. From inside One-touch closing Closing One-touch opening Opening :Pressing the switch in the opposite direction will stop win- dow travel partway.
Page 90 1-4. Opening and closing the windows and moon roof The power back window can be operated when ■ The engine switch is in the ON position. ● The power back window can be opened when the rear window wiper is ●...
Page 91 If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer. Customization that can be configured at Toyota dealer ■ Settings (e.g. power back window) can be changed.
Page 92 1-4. Opening and closing the windows and moon roof ∗ Moon roof Use the overhead switches to open, close, and tilt the moon roof up and down. Opening and closing ■ Open Close To stop partway, press the switch lightly. Tilt up and down ■...
Page 93 Check to make sure that the moon roof is com- pletely stopped and then release the switch. If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer. To reduce wind noise ■...
Page 94 ■ An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the engine switch off. Customization that can be configured at Toyota dealer ■ Settings (e.g. moon roof) can be changed. (Customizable features →P. 703)
Page 95 1-5. Refueling Opening the fuel tank cap Perform the following steps to open the fuel tank cap. Before refueling the vehicle ■ Turn the engine switch off and ensure that all the doors and win- dows are closed. Opening the fuel tank cap ■...
Page 96 1-5. Refueling Hang the fuel tank cap on the back of the fuel filler door. Closing the fuel tank cap When installing the fuel tank cap, turn it until you hear a click. The cap will turn slightly to the opposite direction when released.
Page 97 1-5. Refueling Identifying flex-fuel vehicles ■ Flex-fuel vehicles can be identified by ● the fuel tank cap, which is marked “FLEXFUEL E85/GASOLINE”. Fuel tank capacity ■ Approximately 26.4 gal. (100 L, 22.0 Imp. gal.) E85 Fueling Stations (Flex-fuel vehicles) ■ E85 fueling stations and fuel pumps can be identified by the indication “E85 85% Ethanol”.
Page 98 This may cause static electricity to build up, resulting in a possible ignition hazard. When replacing the fuel cap ■ Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
Page 99 1-5. Refueling NOTICE Refueling ■ Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle’s painted surface. To prevent damage to the fuel filler door ■...
Page 100 1-6. Theft deterrent system Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. The indicator light flashes after the key has been removed from the engine switch to indi-...
Page 101 1-6. Theft deterrent system FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For vehicles sold in Canada Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.
Page 102 1-6. Theft deterrent system Alarm The system sounds the alarm and flashes lights when forcible entry is detected. Triggering of the alarm ■ The alarm is triggered in the following situations when the alarm is set. ● A locked door is unlocked or opened in any way other than using the wireless remote control door lock function or key.
Page 103 1-6. Theft deterrent system System maintenance ■ The vehicle has a maintenance-free type alarm system. Items to check before locking the vehicle ■ To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following. Nobody is in the vehicle. ●...
Page 104 1-6. Theft deterrent system Alarm-operated door lock ■ When the alarm is operating, the doors are locked automatically to pre- ● vent intruders. Do not leave the key inside the vehicle when the alarm is operating, and ● make sure the key is not inside the vehicle when recharging or replacing the battery.
Page 105 1-7. Safety information Correct driving posture Drive in a good posture as follows: Sit upright and well back in the seat. (→P. 50) Adjust the position of the seat forward or backward to ensure the pedals can be reached easily depressed to the extent required.
Page 106 1-7. Safety information CAUTION While driving ■ Do not adjust the position of the driver’s seat while driving. ● Doing so could cause the driver to lose control of the vehicle. Do not place a cushion between the driver or passenger and the seatback. ●...
Page 107 1-7. Safety information SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury. SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas-...
Page 108 1-7. Safety information Airbag system components Side airbags Curtain shield airbag sen- sors AIR BAG ON and AIR BAG OFF indicator lights warning light RSCA OFF indicator light Curtain shield airbags (4WD models only) Front passenger airbag RSCA OFF switch Knee airbags (4WD models only) Side and curtain shield air-...
Page 109 1-7. Safety information Your vehicle is equipped with ADVANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU) controls airbag deployment based on infor- mation obtained from the sensors etc. shown in the system compo- nents diagram above.
Page 110 1-7. Safety information Operating conditions (front airbags) ■ The SRS front airbags will deploy in the event of an impact that exceeds ● the set threshold level (the level of force corresponding to an approxi- mately 12-18 mph [20-30 km/h] frontal collision with a fixed wall that does not move or deform).
Page 111 1-7. Safety information Conditions under which the SRS airbags may deploy (inflate), other ■ than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration. Hitting a curb, edge of pavement or ●...
Page 112 1-7. Safety information Types of collisions that may not deploy the SRS airbag ■ (side airbags and curtain shield airbags) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a colli- sion to the side of the vehicle body other than the passenger compartment.
Page 113 1-7. Safety information When to contact your Toyota dealer ■ In the following cases, contact your Toyota dealer as soon as possible. Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or ●...
Page 114 1-7. Safety information CAUTION SRS airbag precautions ■ Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. The driver and all passengers in the vehicle must wear their seat belts ● properly. The SRS airbags are supplemental devices to be used with the seat belts.
Page 115 An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are...
Page 116 1-7. Safety information CAUTION SRS airbag precautions ■ Do not sit on the edge of the seat or ● lean against the dashboard. Do not allow a child to stand in front of ● the SRS front passenger airbag unit or sit on the knees of a front passenger.
Page 117 1-7. Safety information CAUTION SRS airbag precautions ■ Do not attach anything to or lean any- ● thing against areas such as the dash- board, steering wheel pad or lower portion of the instrument panel. These items can become projectiles when SRS driver, front passenger and knee airbags deploy.
Page 118 If the areas where the SRS airbags are stored, such as the steering wheel ● pad and front and rear pillar garnishes, are damaged or cracked, have them replaced by your Toyota dealer. Modification and disposal of SRS airbag system components ■...
Page 119 1-7. Safety information Deactivating the curtain shield airbags in a vehicle rollover (4WD models only) On/off (hold for a few seconds) The RSCA OFF indicator turns on. (only when the engine switch is in the ON position.) The roll sensing function for the curtain shield airbags and seat belt pretensioners will turn back on automatically each time the...
Page 120 1-7. Safety information Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for the front passenger.
Page 121 1-7. Safety information Conditions and operation of the front passenger occupant classification system Adult* ■ AIR BAG ON and AIR BAG OFF indica- AIR BAG ON tor lights Indicator/ SRS warning light warning light Front passenger’s seat belt reminder Flashing* light Front passenger airbag Front passenger knee airbag...
Page 122 1-7. Safety information Unoccupied ■ AIR BAG ON and AIR BAG OFF indica- Not illumi- tor lights nated Indicator/ SRS warning light warning light Front passenger’s seat belt reminder light Front passenger airbag Deactivated Front passenger knee airbag Side airbag on the front passenger seat Devices Activated Curtain shield airbag in the front passen-...
Page 123 1-7. Safety information : When a larger child who has outgrown a child restraint system sits in the front passenger seat, the system may recognize him/her as an adult depending on his/her physique or posture. : Never install a rear-facing child restraint system on the front pas- senger seat.
Page 124 Do not kick the front passenger seat or subject it to severe impact. Other- ● wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately. Child restraint systems installed on the rear seat should not contact the ●...
Page 125 1-7. Safety information Child restraint systems A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.
Page 126 1-7. Safety information Forward facing — Convertible seat Booster seat Selecting an appropriate child restraint system ■ Use a child restraint system appropriate for the child until the child ● becomes large enough to properly wear the vehicle’s seat belts. If a child is too large for a child restraint system, sit the child on a rear ●...
Page 127 In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. Toyota strongly urges the use of a proper child restraint system that con- ●...
Page 128 1-7. Safety information CAUTION Child restraint precautions ■ Make sure you have complied with all installation instructions provided by ● the child restraint manufacturer and that the system is properly secured. If it is not secured properly, it may cause death or serious injury to the child in the event of a sudden stop, sudden swerve or accident.
Page 129 1-7. Safety information Installing child restraints Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.
Page 130 1-7. Safety information Using the seat belts ■ Seat belts equipped with a child restraint locking mecha- nism (ALR/ELR belts except driver’s seat belt) (→P. 72) Using the top tether strap ■ Anchor brackets (for top tether strap) Second seats (Separated seat) Anchor brackets are provided for all of the second seats.
Page 131 1-7. Safety information Second seats (Bench seat) Anchor brackets are provided for all of the second seats. Third seats Anchor bracket is provided for the third center seat. Installation with LATCH system (second seat only) Second seat (except center seat) Fold the seatback while pulling the lever.
Page 132 1-7. Safety information Second center seat (bench seat) Fold the seatback while pulling the lever. Return the seatback and secure it at the 1st lock posi- tion (most upright position). Adjust the seatback to the 8th lock position. (→P. 54) 1st lock position 8th lock position Type A...
Page 133 1-7. Safety information Type B Latch the hooks of the lower straps onto the LATCH anchors tighten the lower straps. The anchors are installed in the lower seatback under a flap. Confirm the position of the anchors below the sym- bol in the seatback.
Page 134 1-7. Safety information Installing child restraints using a seat belt (child restraint lock function belt) Rear facing ⎯ Infant seat/convertible seat ■ Place the child seat on the rear seat facing the rear of the vehi- cle. Run the seat belt through the child seat and insert the plate into the buckle.
Page 135 1-7. Safety information While pushing the child seat down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 136 1-7. Safety information While pushing the child seat into the rear seat, allow the shoulder belt to retract until the child seat is securely in place. After shoulder belt retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
Page 137 1-7. Safety information Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. Child restraint systems with a top tether strap Second seat Secure the child restraint using the LATCH anchors or seat belt, and adjust the head restraint to the upmost position.
Page 138 1-7. Safety information Second seat Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. Hook Top tether strap Anchor bracket Third center seat Open the anchor bracket cover. Latch the hook onto the anchor bracket and tighten the top tether strap.
Page 139 1-7. Safety information Laws and regulations pertaining to anchorages ■ The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819. CAUTION When installing a booster seat ■...
Page 140 1-7. Safety information CAUTION When installing a child restraint system ■ Only put a forward-facing or booster ● child seat on the front seat when unavoidable. When installing a forward- facing or booster child seat on the front passenger seat, move the seat as far back as possible even if the AIR BAG OFF indicator light is illuminated.
Page 141 1-7. Safety information CAUTION When installing a child restraint system (vehicles with bench type sec- ■ ond seat) Observe the following precautions. Failure to do so may cause death or serious injury to the child or other pas- sengers in the event of a sudden stop or accident. When installing the child restraint system onto the second center seat, ●...
Page 142 2-1. Driving procedures Driving the vehicle The following procedures should be observed to ensure safe driv- ing. Starting the engine (→P. 159) ■ Driving ■ With the brake pedal depressed, shift the shift lever to D. (→P. 162) Release the parking brake. (→P.
Page 143 Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or when- ever the parking brake shoes and/or drum are replaced. Have your Toyota dealer perform the bedding down operation.
Page 144 Have the vehicle inspected by your Toyota dealer immediately. Do not shift the shift lever to P while the vehicle is moving.
Page 145 2-1. Driving procedures CAUTION When driving the vehicle ■ Do not shift the shift lever to D while the vehicle is moving backward. ● Doing so can damage the transmission and may result in a loss of vehicle control. Moving the shift lever to N while the vehicle is moving will disengage the ●...
Page 146 2-1. Driving procedures CAUTION When driving the vehicle ■ If you drive through deep water over about 20 in. (500 mm) in depth, put ● the vehicle height in the HI mode using the height control switch and then change to manual mode by pushing the height control mode select switch. Drive your vehicle at 18 mph (30 km/h) or less.
Page 147 2-1. Driving procedures CAUTION When the vehicle is stopped ■ If the vehicle is stopped on an incline, in order to prevent accidents caused ● by the vehicle rolling forward or backward, always depress the brake pedal and securely apply the parking brake as needed. Avoid revving or racing the engine.
Page 148 ● caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
Page 149 2-1. Driving procedures CAUTION When braking the vehicle ■ Do not pump the brake pedal if the engine stalls. ● Each push on the brake pedal uses up the reserve for the power-assisted brakes. The brake system consists of 2 individual hydraulic systems: If one of the ●...
Page 150 If you hear a squealing or scraping noise while driving (brake pad wear ■ limit indicators) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. The rotor damage can result if the pads are not replaced when needed.
Page 151: Engine Switch
2-1. Driving procedures Engine (ignition) switch Engine switch ■ LOCK The steering wheel is locked and the key can be removed. (The key can be removed only when the shift lever is in P.) Some electrical components such as the audio system can be used.
Page 152 2-1. Driving procedures Turning the key from ACC to LOCK ■ Shift the shift lever to P. (→P. 162) Push in the key and turn to the LOCK position. Steering lock release ■ When starting the engine, the engine switch may seem stuck in the LOCK posi- tion.
Page 153 2-1. Driving procedures NOTICE To prevent battery discharge ■ Do not leave the engine switch in the ACC or ON position for long periods if the engine is not running. When starting the engine ■ Do not crank for more than 30 seconds at a time. This may overheat the ●...
Page 154 2-1. Driving procedures Automatic transmission Select a shift position appropriate for the driving conditions. Shifting the shift lever ■ While the engine switch is on, depress the brake pedal and move the shift lever. Shift position uses ■ Shift position Function Parking the vehicle or starting the engine Reversing...
Page 155 2-1. Driving procedures Changing shift ranges in S mode Shift the shift lever to the S position and operate the shift lever. Upshifting Downshifting The initial shift range in S mode is automatically set to 5 or 4 accord- ing to vehicle speed. However, the initial shift range may be set to 3 or 2 if the AI-SHIFT has operated while the shift lever was in the D position.
Page 156 If the S indicator does not come on even after shifting the shift lever to ■ This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer, immediately. (In this situation, the vehicle will operate as if the shift lever is in D.) AI-SHIFT ■...
Page 157 2-1. Driving procedures Downshifting restrictions warning buzzer (in the S mode) ■ To help ensure safety and driving performance, downshifting operation may sometimes be restricted. In some circumstances, downshifting may not be possible even when the shift lever is operated. (The warning buzzer will sound twice.)
Page 158 2-1. Driving procedures Turn signal lever Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change.
Page 159 2-1. Driving procedures Parking brake parking brake*. (Depressing the pedal again releases the parking brake.) U.S.A. Canada At this time, the indicator will come on. *: Fully depress the parking brake pedal with your left foot while depressing the brake pedal with your right foot.
Page 160 2-1. Driving procedures Horn To sound the horn, press on or close to the mark. After adjusting the steering wheel (vehicles with manual tilt and tele- ■ scopic steering) Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (→P.
Page 161 2-2. Instrument cluster Gauges and meters Vehicles with multi-information display The following gauges, meters and displays illuminate when the engine switch is in the ON position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank.
Page 162 2-2. Instrument cluster Multi-information display →P. 179 Automatic transmission fluid temperature gauge Displays the automatic transmission fluid temperature.
Page 163 2-2. Instrument cluster Vehicles without multi-information display The following gauges, meters and displays illuminate when the engine switch is in the ON position. Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Voltmeter Displays the charge state.
Page 164 2-2. Instrument cluster Odometer/trip meter Odometer: Displays the total distance the vehicle has been driven. Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display differ- ent distances independently.
Page 165: Instrument Panel Light Control
■ When the voltmeter indicates more than 19 V or less than 9 V, the battery ● may be malfunctioning. Have your vehicle checked at your Toyota dealer. When the engine oil pressure gauge does not work properly, immediately ●...
Page 166 2-2. Instrument cluster Indicators and warning lights The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems. Instrument cluster (vehicles with multi-information display) Instrument cluster (vehicles without multi-information display)
Page 167 2-2. Instrument cluster Center panel Outside rear view mirrors [vehicles with BSM (Blind Spot Moni- tor)]...
Page 168 2-2. Instrument cluster Indicators ■ The indicators inform the driver of the operating state of the vehicle’s various systems. Turn signal indicator Tail light indicator (→P. 166) (→P. 188) (Canada) Headlight high beam AUTO LSD indicator indicator (→P. 192) (→P. 253, 256) Security indicator Center differential lock (→P.
Page 169 There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
Page 170 Have the vehicle inspected by your Toyota dealer immediately if this occurs.
Page 171 2-2. Instrument cluster ∗ Multi-information display The multi-information display presents the driver with a variety of driving-related data. ● Trip information (→P. 179) Displays driving range, fuel consumption and other cruis- ing-related information. ● Warning messages (→P. 644) Automatically displayed when a malfunction occurs in one of the vehicle’s systems.
Page 172 2-2. Instrument cluster Zoom display of odometer and trip meters Displays the odometer and one of the trip meters simultaneously. Average Fuel Economy Displays the average fuel consumption since the function was reset. ● The function can be reset by pushing the SELECT RESET button for more than 2 seconds when the Average Fuel Economy is displayed.
Page 173 2-2. Instrument cluster Trip Timer Displays the driving time. To calculate the driving time, press the SELECT RESET button, and to stop the calculation, press it again. To reset the calculation, press the SELECT RESET button for more than 2 seconds. Average Speed Displays the average vehicle speed since the engine was started or the function was reset.
Page 174: Feature Customization
2-2. Instrument cluster Feature customization The vehicle can be customized while the vehicle is stopped. Press the SETUP button to select the item you want to cus- tomize unit. UNITS KEYLESS ENTRY FEEDBACK KEYLESS ENTRY RELOCK TIMER KEYLESS ENTRY ALL DOORS UNLOCK DOOR AUTO LOCKING DOOR AUTO UNLOCKING HEADLAMPS AUTO OFF TIMER...
Page 175 2-2. Instrument cluster Items Screen text Select in this order Double switch KEYLESS ENTRY operation to 1 PRESS 2 PRESSES ALL DOORS unlock all the UNLOCK doors ABOVE 12 MPH SHIFT OUT Automatic door DOOR AUTO OF PARK (20 km/h) locking function LOCKING DRIVER DOOR...
Page 176 Feature customization error ■ • If SYSTEM ERROR message is indicated, turn the engine switch off and then on again. • If SYSTEM ERROR message is indicated again, contact your Toyota dealer. CAUTION Caution while driving ■...
Page 177 2-2. Instrument cluster Accessory meter Outside temperature display Displays the outside air temperature. (→P. 507) Outside temperature and trip information display (if equipped) Displays the outside temperature and trip information. (→P. 172, 507) Clock (→P. 506) H (Hour) button (→P. 506) M (Minute) button (→P.
Page 178 2-2. Instrument cluster Outside temperature and trip information display (if equipped) Every time the INFO button is pushed, the display toggles through these information. ● OUTSIDE (outside temperature display) Displays the outside air temperature. ● AVG (average fuel consumption after refueling) Displays the average fuel consumption since the vehi- cle was last refueled.
Page 179 2-2. Instrument cluster ● Display off The accessory meter can be operated when ■ The engine switch must be in the ON position. To select the unit A (English/U.S. customary system) or unit B (metric ■ unit) (vehicles without multi-information display) Press the SETUP button to change the units.
Page 180 2-3. Operating the lights and wipers Headlight switch The headlights can be operated manually or automatically. Type A Vehicles with day- time running light system: The daytime running lights turn side marker, U.S.A. Canada parking, tail, license plate, daytime run- ning lights equipped) and instru-...
Page 181 2-3. Operating the lights and wipers Type B Vehicles with day- time running light system: The daytime running lights turn side marker, U.S.A. Canada parking, tail, license plate, daytime run- ning lights equipped) and instru- ment panel lights turn The headlights and all lights listed above (except daytime run- ning lights) turn on.
Page 182 2-3. Operating the lights and wipers Type C The daytime running lights turn off. The headlights, side marker, parking, tail, license plate, day- time running lights instruments panel lights turn on automati- cally. (When engine switch is in the ON position) side marker, parking, tail, license...
Page 183 2-3. Operating the lights and wipers Type D The daytime running lights turn off. The headlights, side marker, parking, tail, license plate, day- time running lights instruments panel lights turn on automati- cally. (When engine switch is in the ON position) side marker, parking, tail, license...
Page 184 2-3. Operating the lights and wipers Turning on the high beam headlights With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams.
Page 185 To turn the lights on again, turn the engine switch to the ON position, or turn the headlight switch off once and then back to the position. Customization ■ That can be configured at Toyota dealer. (vehicles without multi-informa- ● tion display) Settings (automatic light off system) can be changed. (Customizable features →P. 703) It is possible to change the settings.
Page 186 2-3. Operating the lights and wipers ∗ Fog light switch The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam. Type A Front fog lights ON ∗...
Page 187 2-3. Operating the lights and wipers Type B Front fog lights ON...
Page 188 2-3. Operating the lights and wipers Windshield wipers and washer Wiper intervals can be adjusted for intermittent operation (when is selected.) Type A Intermittent wind- shield wiper opera- tion speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation Increases the intermittent...
Page 189 2-3. Operating the lights and wipers Washer/wiper dual opera- tion Wipers will automatically oper- ate a couple of times after the washer squirts. Type B Intermittent wind- shield wiper opera- tion speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation...
Page 190 2-3. Operating the lights and wipers Increases the intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency Washer/wiper dual opera- tion Wipers will automatically oper- ate a couple of times after the washer squirts. The windshield wiper and washer can be operated when ■...
Page 191 Damage to the washer fluid pump may be caused if the lever is pulled toward you and held continually. When a nozzle becomes blocked ■ In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
Page 192 2-3. Operating the lights and wipers Rear window wiper and washer Type A Intermittent window wiper operation Normal window wiper operation Washer/wiper dual operation Washer/wiper dual operation The rear window wiper oper- ates while the washer squirts.
Page 193 ■ The engine switch must be in the ON position. ● The back window is fully closed. ● Customization that can be configured at Toyota dealer ■ Settings (e.g. washer linkage wiper control) can be changed. (Customizable features→P. 703) NOTICE When the rear window is dry ■...
Page 194 2-3. Operating the lights and wipers ∗ Headlight cleaner switch Washer fluid can be sprayed on the headlights. Press the switch to clean the headlights. The headlight cleaner can be operated when ■ The engine switch is in the ON position and the headlights are turned on. NOTICE When the washer fluid tank is empty ■...
Page 195 2-4. Using other driving systems Cruise control Use the cruise control to maintain a set speed without depressing the accelerator pedal. Indicator Cruise control switch Setting the vehicle speed ■ Press the ON-OFF button to activate the cruise control. Cruise control indicator will come on.
Page 196 2-4. Using other driving systems Adjusting the set speed ■ To change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 197 If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer.
Page 198 2-4. Using other driving systems CAUTION To avoid operating the cruise control by mistake ■ Switch the cruise control off using the ON-OFF button when not in use. Situations unsuitable for cruise control ■ Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
Page 199 2-4. Using other driving systems ∗ Dynamic laser cruise control Dynamic laser cruise control supplements conventional cruise con- trol with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehi- cles ahead.
Page 200 2-4. Using other driving systems Setting the vehicle speed (vehicle-to-vehicle distance con- ■ trol mode) Press the ON-OFF button to activate the cruise control. Cruise control indicator will come on. Press the button again to deactivate the cruise control. Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed.
Page 201 2-4. Using other driving systems Adjusting the set speed ■ To change the set speed, operate the lever until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction.
Page 202 2-4. Using other driving systems Changing the vehicle-to-vehicle distance ■ Pressing the button changes Preceding vehicle mark vehicle-to-vehicle dis- tance as follows: Long Medium Short The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to the ON position. If a vehicle is running ahead of you, the preceding vehicle mark will also be displayed.
Page 203 2-4. Using other driving systems Canceling and resuming the speed control ■ Pulling the lever toward you cancels the cruise control. The speed setting is also can- celed when the brakes are applied. Pushing lever resumes the cruise control and returns vehicle speed to the set speed.
Page 204 2-4. Using other driving systems Driving in vehicle-to-vehicle distance control mode This mode employs a laser radar sensor to detect the presence of vehicles up to approximately 400 ft. (120 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to main- tain a suitable following distance from the vehicle ahead.
Page 205: Approach Warning
2-4. Using other driving systems Example of follow-up cruising When following a vehicle driving slower than the set speed The system continues follow-up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle dis- tance set by the driver.
Page 206 2-4. Using other driving systems Selecting conventional constant speed control mode Constant speed control mode differs from vehicle-to-vehicle distance control mode. When constant speed control mode is selected, your vehicle will maintain a set speed regardless of whether or not there are other vehicles in the lane ahead.
Page 207 (4WD models) :Vehicle-to-vehicle distance control driving must be reset by pressing the ON-OFF button again. If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer.
Page 208 2-4. Using other driving systems Automatic cancelation of constant speed control ■ The cruise control will stop maintaining the vehicle speed in the following sit- uations: Actual vehicle speed is more than approximately 10 mph (16 km/h) ● below the set vehicle speed At this time, the memorized set speed is not retained.
Page 209 2-4. Using other driving systems CAUTION Before using dynamic laser cruise control ■ Do not overly rely on vehicle-to-vehicle distance control. Be aware of the set speed. If automatic deceleration/acceleration is not appropriate, adjust the vehicle speed, as well as the distance between your vehicle and vehicles ahead by applying the brakes etc.
Page 210 2-4. Using other driving systems CAUTION Situations unsuitable for dynamic laser cruise control ■ Do not use dynamic laser cruise control in any of the following situations. Doing so may result in inappropriate speed control and could cause an acci- dent resulting in death or serious injury.
Page 211 2-4. Using other driving systems CAUTION When the sensor may not be correctly detecting the vehicle ahead ■ Apply the brakes as necessary when any of the following types of vehicles are in front of you. As the sensor may not be able to correctly detect these types of vehicles, the approach warning (→P.
Page 212 If the sensor moves even slightly off position, the system may malfunction. If the sensor or surrounding area is subject to a strong impact, always have the area inspected and adjusted by a Toyota dealer. Do not disassemble the sensor.
Page 213 2-4. Using other driving systems ∗ Intuitive parking assist The intuitive parking assist is designed to inform you of the approxi- mate distance between your vehicle and an obstruction by indicator and buzzer when parking the vehicle. This system uses sensors to detect obstructions.
Page 214 2-4. Using other driving systems Intuitive parking assist switch ■ Press the switch to turn on. (To turn off, press the switch again.) When on, the buzzer sounds to inform the driver that the system is operational. At this time, the indicator will come The distance and buzzer When a sensor detects an obstacle.
Page 215 2-4. Using other driving systems Rear corner sensors Distance shown Indicator Zone in in. and buzzer (mm) Approximately 33.5 — 20.5 Intermittent (850 — 520) Approximately Fast 20.5 — 15.7 intermittent (520 — 400) Approximately Near 15.7 (400) or Continuous less Front corner sensors Distance shown...
Page 216 2-4. Using other driving systems When two or more obstacles are detected simultaneously ■ The buzzer system responds to the nearest zone. When multiple obstacles are detected in front and behind the ■ vehicle at the same time The buzzer will change in the following manner. ●...
Page 217 2-4. Using other driving systems Sensors that operate and detection range The following diagrams show the sensor detection range. Note that sensors may not be able to detect obstacles that are extremely close to the vehicle. Detection range of the sensors ■...
Page 218 Objects lower than the sensors or thin stakes etc. may be detected ini- tially, but as they draw closer, they may cease to be detected. • A towing hitch is mounted to the vehicle. • A non-genuine Toyota suspension (lowered suspension etc.) is installed. • When attaching a two-way radio antenna.
Page 219 This ISM device complies with Canadian ICES-001. If the indicator is continuously on ■ Have the vehicle inspected by your Toyota dealer. If the indicator remains blinking but do not sound the buzzer ■ Clean the sensors with soft cloth.
Page 220 2-4. Using other driving systems ∗ Rear view monitor system The rear view monitor system assists the driver by displaying an image of the area behind the vehicle. The image is displayed in reverse on the screen. This reversed image is a similar image to the one on the inside rear view mirror.
Page 221 2-4. Using other driving systems The rear view monitor system can be operated when ■ The shift lever is in R and the engine switch is ON. Display mode ■ The rear view monitor display mode can be adjusted when the engine switch is in the ON position and the shift lever is in R.
Page 222 2-4. Using other driving systems Displayed area ■ The area covered by the camera is lim- ited. Objects that are close to either corner of the bumper or under the bumper cannot be seen on the screen. The area displayed on the screen may vary according to vehicle orientation or road conditions.
Page 223 2-4. Using other driving systems Driving precautions ■ When the grade behind the vehicle slopes up sharply, objects appear to be farther away than they actually are. When the grade behind the vehicle slopes down sharply, objects appear to be closer than they actually are.
Page 224 2-4. Using other driving systems The distance that appears on the screen between three-dimensional objects (such as vehicles) and flat surfaces (such as the road) and the actual distance differ as follows. In reality, C = A < B (C and A are equally far away;...
Page 225 2-4. Using other driving systems Rear view monitor system camera ■ The rear view monitor system camera is located on the back door as shown in the illustration. In the following cases, it may become dif- ficult to see the images on the screen, even when the system is functioning cor- rectly.
Page 226 ■ If the back of the vehicle has been hit, the camera’s position and mounting ● angle may have changed. Have the vehicle inspected by your Toyota dealer. Rapid temperature changes, such as when hot water is poured on the ●...
Page 227 2-4. Using other driving systems NOTICE Handling of the camera ■ As the camera has a water proof construction, do not detach, disassemble ● or modify it. This may cause incorrect operation. If the camera lens becomes dirty, it cannot transmit a clear image. If water ●...
Page 228 2-4. Using other driving systems ∗ BSM (Blind Spot Monitor) The Blind Spot Monitor is a system that assists the driver to confirm safety when changing lanes. The system uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is not reflected in the outside rear view mirror (the blind spot), and advises the driver of the vehi- cles existence via the outside rear view mirror indicator.
Page 229 2-4. Using other driving systems The Blind Spot Monitor system detection areas The blind spot that vehicles can be detected in are outlined below. The range of the detection area extends to: Approximately 11.5 ft. (3.5 m) from the side of the vehicle The first 1.6 ft.
Page 230 2-4. Using other driving systems Conditions under which the Blind Spot Monitor will not detect a vehicle ■ The Blind Spot Monitor is not designed to detect the following types of vehi- cles and/or objects: Vehicles traveling in the opposite direction ●...
Page 231 2-4. Using other driving systems Instances of the Blind Spot Monitor unnecessarily detecting a vehicle ● and/or object may increase under the following conditions: • When there is only a short distance between your vehicle and a guard- rail, wall etc. •...
Page 232 2-4. Using other driving systems For vehicles sold in Canada IC: 4135A-BSDTX This device complies with the radio standards specification RSS-220 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 233 If the sensor moves even slightly off position, the system may mal- function and vehicles that enter the detection area may not be detected. If the sensor or surrounding area is subject to a strong impact, always have the area inspected by your Toyota dealer. Do not disassemble the sensor. ●...
Page 234 2-4. Using other driving systems ∗ Electronically modulated air suspension The electronically modulated air suspension allows the driver to control the vehicle’s height in order to adjust for driving conditions. Select the desired height with the height control switch. Height control switch Height control mode select switch Selecting vehicle height...
Page 235 2-4. Using other driving systems Height modes ■ ● N mode (normal mode): For ordinary driving Normal height ● HI mode (high mode): For driving on bumpy roads 1.2 in. (30 mm) higher than the normal height The HI mode is unavailable when the vehicle’s speed exceeds 18 mph (30 km/h).
Page 236 2-4. Using other driving systems Automatic leveling function ■ Regardless of the number of occupants or the luggage load, vehicle height in any mode is always adjusted to a fixed height by the automatic leveling function. When HI mode is selected ■...
Page 237 2-4. Using other driving systems CAUTION The electronically modulated air suspension must be turned off in the ■ following circumstances: Otherwise, the automatic leveling function may cause the vehicle’s height to change, and you may catch part of your body in the vehicle, resulting in an unexpected accident: When driving through water such as shallow streams (Put the vehicle ●...
Page 238 2-4. Using other driving systems NOTICE Be careful in any place where overhead space is limited. ■ When changing to a higher mode or after unloading, the vehicle height will rise. This may cause damage to the vehicle. Do not select LO mode when driving on bumpy roads. ■...
Page 239 2-4. Using other driving systems ∗ AVS (Adaptive Variable Suspension System) AVS controls the suspension according to the road and driving con- ditions. Selecting an optimum driving mode allows good vehicle posture and steering wheel operation. Sport mode For winding mountain road driving or high speed driving.
Page 240 2-4. Using other driving systems ∗ Four-wheel drive system Use the front wheel drive control switch to select the following trans- fer modes. : Vehicles with multi-information display : Vehicles without multi-information display 2WD (high speed position, two-wheel drive) Normal driving. 4H (high speed position, four-wheel drive) Greater traction than two wheel drive.
Page 241 2-4. Using other driving systems Shifting between 4H and 4L Shifting from 4H to 4L ■ Stop the vehicle completely. Shift the shift lever to N. Push and turn the front wheel drive control switch fully clock- wise. Maintain this condition until the 4LO indicator turns on. Shifting from 4L to 4H ■...
Page 242 2-4. Using other driving systems Shifting between 2WD and 4H ■ Reduce your speed to less than 62 mph (100 km/h) and set the front ● wheel drive control switch between 2WD and 4H. When the ambient temperature is 5.0°F (-15°C) or lower, shifting from 2WD to 4H cannot be performed with the vehicle speed above 43 mph (70 km/h).
Page 243 In this case, you may not be able to shift between 2WD and 4H, 4H and 4L, and the cen- ter differential lock may not be operable. Have the vehicle inspected by your Toyota dealer immediately. Shifting to 4L position ■...
Page 244 2-4. Using other driving systems CAUTION Shifting from 2WD to 4H while driving ■ Never operate the front wheel drive control switch if the wheels are slipping. Stop the slipping or spinning before shifting. When the vehicle is parked ■ If the shift lever is moved before the 4LO indicator turns on/off, the transfer mode may not be shifted completely.
Page 245 2-4. Using other driving systems AUTO LSD system The AUTO LSD system aids traction by using the traction control system to control engine performance and braking when one of the rear wheels begins to spin. The system should be used only when one of the rear wheels spin- ning occurs in a ditch or rough surface.
Page 246 2-4. Using other driving systems When the AUTO LSD system is operating If the rear wheels spin, the slip indicator flashes to indicate that the AUTO LSD system has con- trolled the spinning of the rear wheels. If the engine is turned off and restarted ■...
Page 247: Brake Assist
2-4. Using other driving systems Driving assist systems To help enhance driving safety and performance, the following sys- tems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle. ABS (Anti-lock Brake System) ■...
Page 248 2-4. Using other driving systems When VSC/Trailer Sway Control/TRAC/A-TRAC are operating If the vehicle is in danger of slip- ping, or if the rear wheels (2WD models) or all wheels (4WD models) spin, the slip indicator flashes indicate that VSC/Trailer Sway Control/TRAC/ A-TRAC have been engaged.
Page 249 2-4. Using other driving systems AUTO LSD mode ■ Stop the vehicle completely, and press the VSC OFF switch for more than 3 seconds, when the system is in the TRAC OFF mode. The VSC OFF and AUTO LSD indicators will come on. The system is in TRAC off, AUTO LSD on and VSC, Trailer Sway Control off mode.
Page 250 2-4. Using other driving systems To disable VSC, Trailer Sway Control and/or A-TRAC (4H mode on 4WD models) If the vehicle gets stuck in fresh snow or mud, VSC, Trailer Sway Control and/or A-TRAC may reduce power from the engine to the wheels.
Page 251 When the TRAC OFF indicator comes on even if the VSC OFF switch ■ has not been pressed TRAC cannot be operated. Contact your Toyota dealer. Sounds and vibrations caused by the ABS, TRAC, A-TRAC, VSC, ■ Trailer Sway Control and brake assist system A sound may be heard from the engine compartment when the engine is ●...
Page 252 2-4. Using other driving systems If the brake system overheats ■ TRAC or A-TRAC will cease operation, and the slip indicator will change from flashing to being on continuously to alert the driver. Stop the vehicle in a safe place. (There is no problem with continuing normal driving.) Shifting to 4L position ■...
Page 253 The ABS, VSC and Trailer Sway Control will not function correctly if different tires are fitted on the vehicle. Contact your Toyota dealer for further information when replacing tires or wheels. Handling of tires and suspension ■...
Page 254 2-4. Using other driving systems CAUTION If trailer sway occurs ■ Observe the following precautions. Failing to do so may cause death or serious injury. Firmly grip the steering wheel. Steer straight ahead. ● Do not try to control trailer swaying by turning the steering wheel. Begin releasing the accelerator pedal immediately but very gradually to ●...
Page 255 2-5. Driving information Off-road precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity to make it capable of performing in a wide variety of off-road applications.
Page 256 2-5. Driving information CAUTION Off-road vehicle precautions ■ Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: In a rollover crash, an unbelted person is significantly more likely to die ●...
Page 257 2-5. Driving information Off-road driving When driving your vehicle off-road, please observe the following pre- cautions to ensure your driving enjoyment and to help prevent the closure of areas to off-road vehicles. ● Drive your vehicle only in areas where off-road vehicles are permit- ted to travel.
Page 258 2-5. Driving information CAUTION Off-road driving precautions ■ Always observe the following precautions to minimize the risk of serious per- sonal injury or damage to your vehicle: Drive carefully when off the road. Do not take unnecessary risks by driving ●...
Page 259 2-5. Driving information NOTICE To prevent the water damage ■ Take all necessary safety measures to ensure that water damage to the ● engine or other components does not occur. Water entering the engine air intake will cause severe engine damage. ●...
Page 260 2-5. Driving information Cargo and luggage Take notice of the following information about storage precau- tions, cargo capacity and load. ● Stow cargo and luggage in the luggage compartment whenever possible. ● Be sure all items are secured in place. ●...
Page 261 2-5. Driving information (6) If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle. Calculation formula for your vehicle Cargo capacity Total load capacity (vehicle...
Page 262 2-5. Driving information As shown in the above example, if the number of occupants increases, the cargo and luggage load will be reduced by an amount that equals the increased weight due to the additional occupants. In other words, if an increase in the number of occupants causes an excess of the total load capacity (combined weight of occupants plus cargo and luggage load), you must reduce the cargo and luggage on your vehicle.
Page 263 ■ To use the roof rails as a roof luggage carrier, you must fit the roof rails with two or more genuine Toyota cross rails or their equivalent. When you load cargo on the roof luggage carrier, observe the following: Place the cargo so that its weight is ●...
Page 264 2-5. Driving information CAUTION Roof luggage carrier precautions ■ If driving for a long distance, on rough roads, or at high speeds, stop ● the vehicle now and then during the trip to make sure the cargo remains in its place. Do not exceed 150 lb.
Page 265 2-5. Driving information Vehicle load limits Vehicle load limits include total load capacity, seating capacity, TWR (Trailer Weight Rating) and cargo capacity. Total load capacity (vehicle capacity weight): (→P. 677) ■ Total load capacity means the combined weight of occupants, cargo and luggage.
Page 266 2-5. Driving information CAUTION Overloading the vehicle ■ Do not overload the vehicle. It may not only cause damage to the tires, but also degrade steering and braking ability, resulting in an accident.
Page 267 2-5. Driving information Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropri- ate to the prevailing weather conditions. Pre-winter preparations ■ ● Use fluids that are appropriate to the prevailing outside tem- peratures.
Page 268 2-5. Driving information When driving the vehicle ■ Accelerate the vehicle slowly and drive at a reduced speed suit- able to road conditions. When parking the vehicle ■ Park the vehicle and move the shift lever to P without setting the parking brake.
Page 269 2-5. Driving information Regulations on the use of snow chains ● Regulations regarding the use of tire chains vary according to loca- tion and type of road. Always check local regulations before install- ing chains. ● Install the chains on the rear tires. ●...
Page 270 NOTICE Repairing or replacing snow tires ■ Request repairs of and obtain replacement snow tires from Toyota deal- ers or legitimate tire retailers. This is because the removal and attachment of snow tires affects the operation of the tire pressure warning valves and transmitters.
Page 271 To tow a trailer safely, use extreme care and drive the vehicle in accordance with your trailer’s characteristics and operating condi- tions. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Contact your Toyota dealer for further information about additional...
Page 272 2-5. Driving information Towing related terms GCWR (Gross Combination Weight Rating) ■ The maximum allowable gross combination weight. The gross combination weight is the sum of the total vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the weight of the trailer being towed (including the cargo in the trailer).
Page 273 2-5. Driving information GAWR (Gross Axle Weight Rating) ■ The maximum allowable gross Front GAWR axle weight. The gross axle weight is the load placed on each axle (front and rear). Rear GAWR TWR (Trailer Weight Rating) ■ The maximum allowable gross (With brakes) trailer weight.
Page 274 2-5. Driving information Unbraked TWR (Unbraked Trailer Weight Rating) ■ The trailer weight rating for tow- (Without brakes) ing a trailer without a trailer ser- vice brake system. Tongue Weight ■ The load placed on the trailer hitch ball. (→P. 284)
Page 275 2-5. Driving information Weight limits ● The gross trailer weight must never exceed the TWR described in the table. (→P. 284) ● The gross combination weight must never exceed the GCWR described in the table. (→P. 284) ● The gross vehicle weight must never exceed the GVWR indi- cated Certification...
Page 276 2-5. Driving information GCWR, TWR and Unbraked TWR Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. GCWR and TWR ■ Driving Model code Engine GCWR system 7400 lb.
Page 277 2-5. Driving information Trailer Tongue Weight ● A recommended tongue weight varies in accordance with the types of trailers or towing as described below. ● To ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. •...
Page 278 Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight require- ment of your vehicle.
Page 279 2-5. Driving information Selecting trailer ball Use the correct trailer ball for your application. Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. Ball diameter Matches the size of the trailer coupler. Most couplers stamped with the required trailer ball size.
Page 280 2-5. Driving information Positions for towing hitch receiver Hitch receiver pin hole posi- tion: 46.2 in. (1172.3 mm) Connecting trailer lights Use the wire harness stored in the rear end under the vehicle body. 4 pin connector 4 pin, 7 pin connectors...
Page 281 2-5. Driving information Service connector for towing brake controller (with towing package) ■ Your vehicle is equipped with a service connector for the trailer brake controller as shown. Access the service connector. Remove the scuff plate. Remove the clip (screw type) and trim board.
Page 282 2-5. Driving information ● Disconnecting Set the height control of electronically modulated air suspen- sion system to N mode. Set the electronically modulated air suspension system to MAN. (manual). Turn off the engine. Set the supporting leg of the trailer on the ground and raise the hitch by 4 in.
Page 283 ● Speed limits for towing a trailer vary by state or province. Do not exceed the posted towing speed limit. ● Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road. Do not exceed this limit, the posted towing speed limit or the speed limit for your trailer as set forth in your trailer owner’s manual, whichever is lowest.
Page 284 2-5. Driving information ● Avoid jerky starts or sudden acceleration. ● Avoid jerky steering and sharp turns, and slow down before mak- ing a turn. ● Note that when making a turn, the trailer wheels will be closer than the vehicle wheels to the inside of the turn. Compensate by making a wider than normal turning radius.
Page 285 2-5. Driving information ● Always place wheel blocks under both the vehicle’s and the trailer’s wheels when parking. Apply the parking brake firmly, and put the transmission in P. Avoid parking on a slope, but if unavoid- able, do so only after performing the following: Apply the brakes and keep them applied.
Page 286 2-5. Driving information Matching trailer ball height to trailer coupler height ■ No matter which class of tow hitch applies, for a more safe trailer hookup, the trailer ball setup must be the proper height for the coupler on the trailer. Coupler Trailer ball Before towing...
Page 287 ■ If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential or wheel bearing), Toyota rec- ommends that you do not tow a trailer until the vehicle has been driven for over 500 miles (800 km).
Page 288 2-5. Driving information If you cannot find any problems, the speed at which trailer swaying occurred is beyond the limit of your particular vehicle-trailer combination. Drive at a lower speed to prevent instability. Remember that swaying of the towing vehicle-trailer increases as speed increases. CAUTION Trailer towing precautions ■...
Page 289 When towing a trailer ■ Toyota recommends trailers with brakes that conform to any applicable fed- eral and state/provincial regulations. If the gross trailer weight exceeds unbraked TWR, trailer brakes are ●...
Page 290 NOTICE When installing a trailer hitch ■ Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. Do not directly splice trailer lights ■...
Page 291 2-5. Driving information Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE To avoid serious damage to your vehicle ■ Do not tow your vehicle with four wheels on the ground.
Page 292 3-1. Using the air conditioning system and defogger Front air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Control panel Windshield defogger Air outlet selection dial Driver's side temperature Front passenger’s control dial side temperature Air conditioning ON/OFF switch control dial Automatic mode...
Page 293 3-1. Using the air conditioning system and defogger Display Front passenger’s side Fan speed display Airflow display temperature setting display Temperature setting Driver’s side temperature display for rear passengers setting display Using the automatic mode Press The air conditioning system will begin to operate. Air outlets and fan speed are automatically adjusted according to the temperature set- ting.
Page 294 3-1. Using the air conditioning system and defogger Adjusting the settings Adjusting the temperature setting ■ Turn the temperature control dial clockwise (warm) or counter- clockwise (cool). The air conditioning system switches between individual and simultaneous modes each time is pressed. ●...
Page 295 3-1. Using the air conditioning system and defogger Changing the air outlets ■ Turn the air outlet selection dial. The air outlets switch each time either side of air outlet selection dial is turned. Air flow as shown according to the mode selected. When the dial is set to , air flows to the upper body.
Page 296 3-1. Using the air conditioning system and defogger When the dial is set to , air flows to the feet. When the dial is set to , air flows to the feet and the wind- shield defogger operates. Recirculated air mode will auto- matically switch to outside air mode.
Page 297 3-1. Using the air conditioning system and defogger Defogging the windshield Press The indicator comes on. The air conditioning system con- trol operates automatically. Recirculated air mode will auto- matically switch to outside air mode. Adjusting the position and opening and closing the air outlets Driver side outlets Direct air flow to the left or right, up or down.
Page 298 3-1. Using the air conditioning system and defogger Passenger side outlets Direct air flow to the left or right, up or down. Turn the knob to open or close the vent. Using the automatic mode ■ Fan speed is adjusted automatically in accordance with the temperature set- ting and ambient conditions.
Page 299 There may be a problem in the air conditioning system if the indi- cator continues to flash. Turn the air conditioning system off and have it inspected by your Toyota dealer. Air conditioning odors ■...
Page 300 3-1. Using the air conditioning system and defogger Rear air conditioning system Airflow and outlets are automatically adjusted according to the tem- perature setting. Temperature setting Automatic mode Airflow control display Temperature control Fan speed control for rear passengers Button lock function ■...
Page 301 3-1. Using the air conditioning system and defogger Using the automatic mode Press The indicator comes on. The air conditioning system will operate, and air outlets and fan speed will be set automatically. Press to increase the temperature and decrease it. Adjusting the settings Adjusting the temperature setting ■...
Page 302 3-1. Using the air conditioning system and defogger is pressed, air When flows to the upper body and feet. The indicator comes on. is pressed, air When flows to the feet. The indicator comes on. Adjusting the fan speed ■ (decrease ↔...
Page 303 3-1. Using the air conditioning system and defogger Adjusting the position and opening and closing the air outlets Roof side outlets Direct air flow to the left or right, up or down. NOTICE To prevent battery discharge ■ Do not leave the air conditioning system on longer than necessary when the engine is stopped.
Page 304 3-1. Using the air conditioning system and defogger ∗ Rear window and outside rear view mirror defoggers These features are used to defog the rear window, and to remove raindrops, dew and frost from the outside rear view mirrors. On/off Press the button to turn on the rear window defogger.
Page 305 3-1. Using the air conditioning system and defogger CAUTION When the outside rear view mirror defoggers are on (vehicles with out- ■ side rear view mirror defoggers) Do not touch the rear view mirror surfaces, as they can become very hot and burn you.
Page 306 3-1. Using the air conditioning system and defogger ∗ Windshield wiper de-icer This feature is used to prevent ice from building up on the wind- shield and wiper blades. On/off Press the button to turn on the windshield wiper de-icer. The indicator will come on.
Page 307 3-1. Using the air conditioning system and defogger ∗ Using the steering wheel climate remote control switches Some air conditioning features can be controlled using the switches on the steering wheel. Temperature control Automatic mode Using the automatic mode Press The air conditioning system will operate, and air outlets and fan speed will be set automatically.
Page 308 3-1. Using the air conditioning system and defogger Turning off the fan Press...
Page 309 3-2. Using the audio system Audio system With navigation system Owners of models equipped with a navigation system should refer to the “Navigation System Owner’s Manual”. Without navigation system Type A: CD player with changer controller and AM/FM radio Type B: CD player with changer and AM/FM radio...
Page 310: Table Of Contents
3-2. Using the audio system Type C: CD player with changer controller and AM/FM radio Title Page Using the radio P. 323 Using the CD player P. 331 Playing MP3 and WMA discs P. 340 Operating an iPod P. 348 Operating a USB memory P.
Page 311 3-2. Using the audio system Language settings (type B and C) The language used for all voice guidance, voice recognition and mes- sages may be changed. Press Press that corresponds to “MORE”. Press that corresponds to “LANG”. Press that corresponds to the desired language. For vehicles sold in the U.S.A.
Page 312 3-2. Using the audio system CAUTION For vehicles sold in U.S.A. and Canada ■ Part 15 of the FCC Rules ● FCC Warning: Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device. Laser products ●...
Page 313: Using The Radio
3-2. Using the audio system Using the radio Type A Power Volume Station selector Changing Seeking the the channel frequency Displaying radio text Adjusting the messages frequency (AM, FM mode) or channel AM⋅SAT/FM Scanning for (SAT mode) mode buttons receivable stations Type B and C Power Volume...
Page 314 3-2. Using the audio system ® Setting station presets (excluding XM Satellite Radio) Search for desired stations by turning ∧ pressing “ ” or “∨” on Press and hold a button (from or one of until you hear a beep. Type B and C: Each time is pressed, station pages are changed.
Page 315 3-2. Using the audio system Displaying radio text messages (for type B and C, FM mode ■ only) When a new radio text message is received, “MSG” is shown on the display. To display the message, press If the text continues past the end of the display, “ ”...
Page 316 3-2. Using the audio system ® Setting XM Satellite Radio channel presets ■ Select the desired channel. Press and hold a button (from or one of ) until you hear a beep. Type B and C: Each time is pressed, station pages are changed. There are a total of 6 pages.
Page 317 3-2. Using the audio system Displaying text information ■ Press Each time is pressed, the display changes in the following order: Type A Channel name → Title (song/program title) → Name (artist name/feature) → Channel number. Type B and C Title (song/program title) →...
Page 318 3-2. Using the audio system When the battery is disconnected ■ All preset stations are erased. (type A only) Reception sensitivity ■ Cargo loaded on the roof luggage carrier, especially metal objects, may ● ® adversely affect the reception of XM Satellite Radio.
Page 319 ANTENNA securely. CHECK There is a short-circuit in the antenna or the sur- ANTENNA rounding antenna cable. See a Toyota certified dealer. ® You have not subscribed to XM Satellite Radio. The radio is being updated with the latest encryp- ®...
Page 320 3-2. Using the audio system The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel. ® Contact the XM Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 209-0079 (Canada) Certifications for the radio tuner...
Page 321: Using The Cd Player
3-2. Using the audio system Using the CD player Type A Power Volume Random playback Repeat play Reverse Fast-forward CD eject Displaying text Selecting Playback a track messages Searching playback Type B and C Power Volume CD eject Selector buttons CD load (type B only) Fast-forwarding...
Page 322 3-2. Using the audio system Loading CDs Loading a CD (type A and C) ■ Insert a CD. Loading a CD (type B) ■ Press When the indicator on the slot turns from amber to green, insert a CD. Loading multiple CDs (type B only) ■...
Page 323 3-2. Using the audio system Ejecting CDs Ejecting a CD (type A and C) ■ Press and remove the CD. Ejecting a CD (type B) ■ To select the CD to be ejected, press that corre- sponds to “ ” or “ ”.
Page 324 3-2. Using the audio system Scanning tracks Press The first ten seconds of each track will be played. To cancel, press again. Press again when the desired track is reached. Selecting a CD (type B only) Selecting a CD to play ■...
Page 325 3-2. Using the audio system Random playback Current CD ■ Press that corresponds to “RDM”. Songs are played in random order. To cancel, press the button again. All CDs (type B only) ■ Press that corresponds to “RDM” twice. Tracks on all loaded CDs are played in random order. To cancel, press the button again.
Page 326 The CD may be dirty, damaged or inserted up-side down. “WAIT” or “PLEASE WAIT”:Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played back.
Page 327 3-2. Using the audio system Discs that can be used ■ Discs with the marks shown below can be used. Playback may not be possible depending on the recording format or disc features, or due to scratches, dirt or deterioration. CDs with copy-protection features may not be used.
Page 328 3-2. Using the audio system NOTICE CDs and adapters that cannot be used ■ Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Discs. Doing so may damage the CD player and/or the CD insert/eject function. CD player with changer and AM/FM ●...
Page 329 3-2. Using the audio system NOTICE CD player precautions ■ Failure to follow the precautions below may result in serious damage to the CDs or the player itself. Do not insert anything other than CDs into the CD slot. ● Do not apply oil to the CD player.
Page 330: Playing Mp3 And Wma Discs
3-2. Using the audio system Playing MP3 and WMA discs Type A Power Volume Reversing Fast-forwarding CD eject Selecting a folder Selecting a file Displaying text messages Random playback Searching playback Playback Repeat play Type B and C Power Volume Selector buttons CD eject CD load...
Page 331 3-2. Using the audio system Loading and ejecting MP3 and WMA discs →P. 332, 333 Selecting MP3 and WMA discs (type B only) →P. 334 Selecting and scanning a folder Selecting folders one at a time ■ Press “∧” or “∨” on to select the desired folder.
Page 332 3-2. Using the audio system Fast-forwarding and reversing files Type A Press Type B and C ∧ Press and hold “ ” or “∨” on Playing and pausing files (type B and C) Press Random playback Playing files from a particular folder in random order ■...
Page 333 3-2. Using the audio system Repeat play Repeating a file ■ Press that corresponds to “RPT”. To cancel, press the button again. Repeating all of the files in a folder ■ Type A Press and hold until you hear a beep. To cancel, press the button again.
Page 334 “WAIT” or “PLEASE WAIT”:Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then press . Contact your Toyota dealer if the CD still cannot be played. Discs that can be used ■...
Page 335 3-2. Using the audio system MP3 and WMA files ■ MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. ® WMA (Windows Media Audio) is a Microsoft audio compression format.
Page 336 3-2. Using the audio system Compatible disc formats ● The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2 CD-ROM XA Mode 2, Form 1 and Form 2 • File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet) MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.
Page 337 3-2. Using the audio system Extensions ● If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.
Page 338: Operating An Ipod
3-2. Using the audio system ∗ Operating an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Connecting an iPod ■ Open the cover and connect an iPod using an iPod cable. Turn on the power of the iPod if it is not turned on.
Page 339 3-2. Using the audio system Selecting a play mode Press that corresponds to “BROWSE” to select iPod menu mode. Press that corresponds to the desired play mode. Play mode list ■ First Second Third Fourth Play mode selection selection selection selection Playlist Songs...
Page 340 3-2. Using the audio system Selecting a list ■ Turn to display the first selection list. Press to select the desired item. Pressing that corresponds to “MORE” changes to the second selection list. Repeat the same procedure to select the desired song name. To return to the previous selection list, press that corresponds to “...
Page 341 3-2. Using the audio system Fast-forwarding and reversing songs ∧ Press and hold “ ” or “∨” on Shuffle playback Playing songs from one playlist or album in random order ■ Press that corresponds to “RDM”. To cancel, press the button twice. Playing songs from all the playlists or albums in random order ■...
Page 342 3-2. Using the audio system About iPod ■ Apple is not responsible for the operation of this device or its compliance ● with safety and regulatory standards. iPod is a trademark of Apple Inc., registered in the U.S. and other coun- ●...
Page 343 3-2. Using the audio system Compatible models ■ Model Generation Software version iPod 5th generation Ver. 1.2.0 or higher iPod nano 1st generation Ver. 1.3.0 or higher 2nd generation Ver. 1.1.2 or higher 3rd generation Ver. 1.0.0 or higher iPod touch 1st generation Ver.
Page 344 3-2. Using the audio system NOTICE To prevent damage to iPod ■ Do not leave iPod in the vehicle. The temperature inside the vehicle may ● become high, resulting in damage to the player. Do not push down on or apply unnecessary pressure to the iPod while it is ●...
Page 345: Operating A Usb Memory
3-2. Using the audio system ∗ Operating a USB memory Connecting a USB memory enables you to enjoy music from the vehicle speakers. Connecting a USB memory ■ Open the cover and connect a USB memory. Turn on the power of the USB memory if it is not turned on.
Page 346 3-2. Using the audio system Selecting and scanning a folder Selecting a folder ■ Press “∧” or “∨” on to select the desired folder. Returning to the first file of the first folder ■ Press and hold “∨” on until you hear a beep. Scanning the first file of all the folders ■...
Page 347 3-2. Using the audio system Playing and pausing files Press Fast-forwarding and reversing files ∧ Press and hold “ ” or “∨” on Random playback Playing files from a folder in random order ■ Press that corresponds to “RDM”. To cancel, press the button twice. Playing all the files from a USB memory in random order ■...
Page 348 3-2. Using the audio system Switching the display Press Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time USB memory functions ■ Depending on the USB memory that is connected to the system, certain functions may not be available.
Page 349 3-2. Using the audio system Items related to standards and limitations are as follows: • Maximum directory hierarchy: 8 levels • Maximum number of folder in device: 999 (including the root) • Maximum number of files in device: 65,025 • Maximum number of files per folder: 255 MP3 and WMA files ●...
Page 350 3-2. Using the audio system File names ● The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma. ID3 and WMA tags ● ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc.
Page 351 3-2. Using the audio system CAUTION Caution while driving ■ Do not connect a USB memory or operate the controls. NOTICE To prevent damage to a USB memory ■ Do not leave a USB memory in the vehicle. The temperature inside the ●...
Page 352: Optimal Use Of The Audio System
3-2. Using the audio system Optimal use of the audio system Type A Adjusting the sound quality and ASL Type B and C Menu button Selector buttons Selector knob...
Page 353 3-2. Using the audio system Using the audio control function Changing sound quality modes ■ Type A Pressing selects the mode to be changed in the following order: “BAS”→“TRE”→“FAD”→“BAL”→“ASL” Type B and C Press Press that corresponds to the desired mode. “BASS”, “MID”...
Page 354 3-2. Using the audio system Type B and C Turning adjusts the level. Mode Sound qual- Turn to the Turn to the Level displayed ity mode left right BASS Bass* -5 to 5 Mid-range* -5 to 5 High (type B only) TREB Treble* -5 to 5...
Page 355 3-2. Using the audio system Type B and C Press Press that corresponds to “MORE”. Press that corresponds to “ASL”. Press that corresponds to the desired mode. Type B: “ON” or “OFF” Type C: “LOW”, “MID”, “HIGH”, or “OFF” ASL automatically adjusts the volume and tone quality according to vehicle speed.
Page 356: Using The Aux Port
3-2. Using the audio system Using the AUX port This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. Open the cover and connect the portable audio device. Type A Type B and C Press...
Page 357 3-2. Using the audio system Operating portable audio devices connected to the audio system ■ The volume can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the portable audio device itself. When using a portable audio device connected to the power outlet ■...
Page 358: Using The Steering Wheel Audio Switches
3-2. Using the audio system ∗ Using the steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of audio system or navi- gation system. For details, refer to the manual provided with the audio system or navigation system.
Page 359 3-2. Using the audio system Turning the power on Press when the audio system is turned off. The audio system can be turned off by holding the switch down until you hear a beep. Changing the audio source Press when the audio system is turned on. The audio source changes as follows each time the switch is pressed.
Page 360 3-2. Using the audio system Selecting a track/file or song ® Press to select the CD, iPod, USB memory or Bluetooth audio mode. Press “∨” or “∧” on to select the desired track/file or song. Selecting a folder or album ®...
Page 361 ® 3-3. Using the Bluetooth audio system ® ∗ Bluetooth audio system ® The Bluetooth audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. ® This audio system supports Bluetooth , a wireless data system capable of playing portable audio music without cables.
Page 362 ® 3-3. Using the Bluetooth audio system ® About Bluetooth ■ Bluetooth is a registered trademark of Bluetooth SIG. Inc. Compatible models ■ ® Bluetooth specifications: ● Ver. 1.2 Following Profiles: ● • A2DP (Advanced Audio Distribution Profile) Ver. 1.0 •...
Page 363 ® 3-3. Using the Bluetooth audio system CAUTION FCC WARNING ■ Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regula- tions, must be used with a distance of at least 7.9 in.
Page 364 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system Audio unit ■ Display A message, name, number, etc. is displayed. Lower-case characters and special characters cannot be displayed. Displays information that is too long to be displayed at one time on the display (press and hold) Selects items such as menu...
Page 365 ® 3-3. Using the Bluetooth audio system Operating the system using voice commands By following the voice guidance instructions output from the speaker, ® voice commands enable the operation of the Bluetooth audio sys- tem without the need to check the display or operate Operation procedure when using voice commands ■...
Page 366 ® 3-3. Using the Bluetooth audio system ® Using the Bluetooth audio system for the first time ® Before using the Bluetooth audio system, it is necessary to register ® a Bluetooth enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player: Press until “BT AUDIO”...
Page 367: Audio System
® 3-3. Using the Bluetooth audio system ® Menu list of the Bluetooth audio system Normal operation ■ Second First menu Third menu Operation detail menu “Pair Audio Registering a portable player Player” “Select Audio Selecting a portable player to Player”...
Page 368 ® 3-3. Using the Bluetooth audio system When using a voice command ■ For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly. The system may not recognize your voice in the following situations: ■...
Page 369 ® 3-3. Using the Bluetooth audio system ® Operating a Bluetooth enabled portable player Power Volume Selecting an album Selector buttons Fast-forwarding Playback/pause and reversing/ Displaying text messages Selecting a track Selecting a track Playback Selecting an album Press “∨” or “∧” on Selecting tracks Turn or press “∧”...
Page 370 ® 3-3. Using the Bluetooth audio system Fast-forwarding and reversing tracks ∧ Press and hold “ ” or “∨” on Switching the display Press Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time Using the steering wheel audio switches →P.
Page 371 ® 3-3. Using the Bluetooth audio system ® Setting up a Bluetooth enabled portable player ® Registering a portable player in the Bluetooth audio system allows the system to function. The following functions can be used for reg- istered portable players: Functions and operation procedures ■...
Page 372 ® 3-3. Using the Bluetooth audio system Selecting a portable player to be used Select “Select Audio Player” using a voice command or Select the portable player to be used by either of the following methods, and select “Confirm” by using a voice command or a.
Page 373 ® 3-3. Using the Bluetooth audio system Changing the registered name of a portable player Select “Change Name” using a voice command or Select the name of the portable player to be changed by either of the following methods, and select “Confirm” using a voice command or a.
Page 374 ® 3-3. Using the Bluetooth audio system Changing the passkey Select “Set Passkey” using a voice command or Press the talk switch, say a 4 to 8-digit number, and select “Confirm” using a voice command or When the entire number to be registered as a passkey has been input, press again.
Page 375 ® 3-3. Using the Bluetooth audio system The number of portable players that can be registered ■ Up to 2 portable players can be registered in the system.
Page 376 ® 3-3. Using the Bluetooth audio system ® Bluetooth audio system setup System setup items and operation procedures ■ ● Setting voice guidance volume 1. “Setup” → 2. “System Setup” → 3. “Guidance Volume” (→P. 470) ® ● Displaying the Bluetooth device address and name 1.
Page 377 3-4. Using the rear seat entertainment system ∗ Rear seat entertainment system features The rear seat entertainment system is designed for the rear passen- gers to enjoy video such as Blu-ray Disc™ (BD) and DVD disc. Vehicles with a navigation system The sounds of the rear seat entertainment system are available from both vehicle speakers and headphones.
Page 378 3-4. Using the rear seat entertainment system Vehicles without a navigation system The sounds of the rear seat entertainment system are available from the headphones only. They are not available from the vehi- cle speakers. Rear seat entertainment system Remote controller A/V input port Headphone volume control dials and headphone jacks...
Page 379 3-4. Using the rear seat entertainment system Opening and closing the display Opening the display ■ Press the lock release button to open the display. Pull the display down to an easily viewable angle. Closing the display ■ Push the display up until a click is heard.
Page 380 3-4. Using the rear seat entertainment system Loading and ejecting a disc Insert the disc into the slot with the label side up. The “DISC” indicator light turns on while the disc is loaded. The player will start to play the disc automatically.
Page 381 3-4. Using the rear seat entertainment system To eject the SD card, push on the center of the SD card. When it ejects slightly pull it straight out. Remote controller The rear seat entertainment system can be operated with the remote controller.
Page 382 3-4. Using the rear seat entertainment system Remote controller ■ Vehicles with a navigation system Turning on/off the rear seat entertainment system Selecting a control icon Inputting the selected control icon Turning on/off the speaker output Changing the screen size Turning on the “VIDEO”...
Page 383 3-4. Using the rear seat entertainment system Turning on/off the rear seat entertainment system Press to turn on the rear seat entertainment system. Press once again to turn off the system. Adjusting the volume (vehicles with a navigation system) Press “+” or “-” on the “VOL” button to adjust the volume. When the speaker output is off, the volume cannot be adjusted.
Page 384 3-4. Using the rear seat entertainment system Adjusting the screen settings You can adjust the color, contrast, tone and brightness of the screen. The screen setting levels can be adjusted for day mode and night mode individually. Press the “SETTING” button The screen settings can be adjusted.
Page 385 3-4. Using the rear seat entertainment system Screen button Function “R” Strengthens the red color “Color” “G” Strengthens the green color “-” Weakens the tone “Tone” “+” Strengthens the tone “-” Weakens the contrast “Contrast” “+” Strengthens the contrast “-” Darkens the screen “Brightness”...
Page 386 3-4. Using the rear seat entertainment system Operating from the front seats (vehicles with a navigation system) The rear seat entertainment system can be operated from the front seats. Press the “MEDIA” button. Touch the “Rear” tab on the screen. Touch the desired button.
Page 387 3-4. Using the rear seat entertainment system The rear seat entertainment system can be used when ■ The engine switch is in ACC or ON position. Discs that can be used ■ Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration.
Page 388 3-4. Using the rear seat entertainment system SD card functions ■ This system can play JPEG pictures and AVCHD video images that are ● stored in an SD card. It does not support music playback. Local storage ● • Some BD videos have a feature to memorize disc information, such as a resume point, in a local storage.
Page 389 ■ With some wireless headphones generally available in the market, it may ● be difficult to catch signals properly. Toyota recommends the use of Toyota genuine wireless headphones. Please contact your Toyota dealer for further details. When the sound volume needs to be changed while a wireless head- ●...
Page 390 3-4. Using the rear seat entertainment system “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corpora- ● tion and Sony Corporation. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. ● SDXC Logo is a trademark of SD-3C, LLC. ●...
Page 391 3-4. Using the rear seat entertainment system This product is licensed under the AVC patent portfolio license and the ● VC-1 patent portfolio license for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC Standard and the VC-1 Standard (“AVC/VC-1 Video”) and/or (ii) decode AVC/VC-1 Video that was encoded by a con- sumer engaged in a personal activity and/or was obtained from a video...
Page 392 3-4. Using the rear seat entertainment system This product incorporates the following software: ● (1) the software developed independently by or for Panasonic Corpora- tion, (2) the software owned by third party and licensed to Panasonic Cor- poration, (3) the software licensed under the GNU General Public License, Version 2 (GPL V2), (4) the software licensed under the GNU LESSER General Public License, Version 2.1 (LGPL v2.1) and/or,...
Page 393 3-4. Using the rear seat entertainment system CAUTION When the rear seat entertainment system is not used ■ Keep the display closed. In the event of an accident or sudden braking, the opened display may hit an occupant’s body, resulting in injury. To prevent accidents and electric shock ■...
Page 394 3-4. Using the rear seat entertainment system NOTICE Cleaning the display ■ Wipe the display with a dry soft cloth. If the screen is wiped with a rough cloth, the surface of the screen may be scratched. Opening and closing the display ■...
Page 395 3-4. Using the rear seat entertainment system ∗ Playing a Blu-ray Disc™ (BD) and DVD disc This system can play Blu-ray Disc™ (BD) videos with digital sound. In addition to commercial BD and DVD titles, AVCHD and BDAV vid- eos can be played on this system, so digital TV recorded by home digital video recorders and BD/DVD home videos recorded by home digital video cameras can also be played on this system.
Page 396 3-4. Using the rear seat entertainment system Vehicles without a navigation system Displaying option screen Selecting a control icon Inputting the selected con- trol icon Selecting a chapter Fast-forward/rewind Play/pause Stop Displaying the menu screen Displaying the top menu screen Turning on the BD/DVD mode...
Page 397 3-4. Using the rear seat entertainment system Option screen ■ Press the “OPTION” button while watching a BD/DVD video, the following screen appears. ● Top page BD video Turning option screen Displaying the third page Displaying second page Displaying the top menu screen Displaying pop-up...
Page 398 3-4. Using the rear seat entertainment system AVCHD BDAV...
Page 399 3-4. Using the rear seat entertainment system ● Second page BD video Displaying the initial setup screen Displaying the top page Displaying the third page Searching for a title Searching for a chapter Returning to the predeter- mined scene DVD video Changing the audio lan- guage Changing the subtitle lan-...
Page 400 3-4. Using the rear seat entertainment system BDAV ● Third page BD video Displaying the second page Displaying the top page Displaying the color key buttons Displaying the 10 key pad Displaying the secondary video (Picture-in-picture) Changing secondary audio...
Page 401 3-4. Using the rear seat entertainment system Turning on the BD/DVD mode Insert a disc or Press the “DISC” button with a disc inserted. The player will start to play the disc automatically. Playing/pausing a disc Press to play/pause. Press and hold while pausing, the video is played slowly.
Page 402 3-4. Using the rear seat entertainment system Option screen Displaying the option screen ■ Press the “OPTION” button. The option screen is displayed. Press the “OPTION” button once again or select “Hide Buttons” to turn off the option screen. Displaying the pop-up menu (BD video) ■...
Page 403 3-4. Using the rear seat entertainment system Searching for a title or chapter ■ Select “Page 2” or “Settings”. Select “Title Search” or “Chapter Search”. Input the title number or chapter and select “OK”. number, Changing the angle ■ The angle can be changed for discs that are multi-angle compati- ble when the angle mark appears on the screen.
Page 404 3-4. Using the rear seat entertainment system Changing the subtitle language ■ The subtitle language can be changed for discs with multiple subti- tle languages. Select “Page 2” or “Settings”. Select “Subtitle”. Each time “Subtitle” is selected, another language available on the disc is selected.
Page 405 3-4. Using the rear seat entertainment system Changing the audio channel (BDAV) ■ The audio channel can be changed for discs with multiple audio channels. Select “Settings”. Each time “MAIN/SUB” mode changes in selected, the the following order: “MAIN”: Main audio channel ↓...
Page 406 3-4. Using the rear seat entertainment system Displaying the secondary video (Picture-in-picture) (BD video) ■ Picture-in-picture is a secondary video that plays embedded in the primary video. The secondary video can be played from a disc compatible with the picture-in-picture function. Select “Page 3”.
Page 407 3-4. Using the rear seat entertainment system Displaying the color key buttons (BD video) ■ The color button is used for various uses according to directions of contents. Select “Page 3”. Select “Color Keys”. The color key buttons are dis- played on the screen.
Page 408: Initial Setup
3-4. Using the rear seat entertainment system Initial setup ■ ● Displaying the initial setup screen Select “Page 2” or “Settings”. Select “Setup”. Select the settings to be changed. Page 1 After the settings are changed, select “OK”. “Page 2”: Goes to next page “Default”: Restores default set- tings “Clear BD History”: BD history...
Page 409 3-4. Using the rear seat entertainment system ● Changing the initial audio language Select “Audio Language”. Select the desired language. If you cannot find the desired lan- guage, select “Other” and input the desired language code. (→P. 426) ● Changing the initial subtitle language Select “Subtitle Language”.
Page 410 3-4. Using the rear seat entertainment system ● Setting the angle mark If the BD/DVD disc has angle options, you can turn the angle mark on/off. Each time “Angle Mark” selected, “ON” or “OFF” can be selected. ● Setting the DVD parental lock The level of viewer restrictions can be set.
Page 411 3-4. Using the rear seat entertainment system ● Setting the BD parental lock The age of viewer restrictions can be set. Select “BD Parental Lock”. Input the 4-digit personal code and then select “OK”. Select 10 times to reset the personal code in case the code was forgotten.
Page 412 3-4. Using the rear seat entertainment system ● Setting a sound dynamic range The difference between the lowest and highest sound volumes can be adjusted. Each time “Sound Dynamic Range” is selected, the setting changes in the following order: “MAX”: Maximum dynamic range ↓...
Page 413 3-4. Using the rear seat entertainment system When storing content on BD-R, BD-RE, DVD-R or DVD-RW discs, they ● must be finalized using a recorder. Discs that are not finalized cannot be played by this system. Discs that are recorded with multi session cannot be played by this sys- ●...
Page 414 3-4. Using the rear seat entertainment system BD/DVD video disc information ■ Parental controls ● This feature limits what can be viewed in conformity with the level of restrictions of the country. The level of restrictions varies depending on the BD/DVD video disc.
Page 415 3-4. Using the rear seat entertainment system AVCHD ● AVCHD is a new format (standard) for high definition video cameras that can record and play high-resolution HD images. DVDs and SD cards with videos recorded in AVCHD format can playback on this system.
Page 416 3-4. Using the rear seat entertainment system Language codes list ■ Code Language Code Language 0514 English 0401 Danish 0618 French 0426 Bhutani 0405 German 0515 Esperanto 0920 Italian 0520 Estonian 0519 Spanish 0521 Basque 2608 Chinese 0601 Persian 1412 Dutch 0609 Finnish...
Page 417 3-4. Using the rear seat entertainment system Code Language Code Language 1112 Greenlandic 1815 Romanian 1113 Cambodian 1823 Kinyarwanda 1114 Kannada 1901 Sanskrit 1119 Kashmiri 1904 Sindhi 1121 Kurdish 1907 Sangho 1125 Kirghiz 1908 Serbo-Croatian 1201 Latin 1909 Sinhalese 1214 Lingala 1911 Slovak...
Page 418 3-4. Using the rear seat entertainment system Code Language Code Language 2118 Urdu 2408 Xhosa 2126 Uzbek 2515 Yoruba 2209 Vietnamese 2601 Zhuang 2215 Volapük 2621 Zulu 2315 Wolof CAUTION BD/DVD video precaution ■ Conversational speech on some BDs/DVDs is recorded at a low volume to emphasize the impact of sound effects.
Page 419 3-4. Using the rear seat entertainment system NOTICE Discs and adapters that cannot be used ■ Do not use the following types of discs, 8 cm (3 in.) disc adapters or Dual Discs. Doing so may damage the player and/or disc insert/eject function. Discs that have a diameter that is not ●...
Page 420 3-4. Using the rear seat entertainment system NOTICE Player precautions ■ Failure to follow the precautions below may result in damage to the discs or the player itself. Do not insert anything other than discs into the disc slot. ● Do not apply oil to the player.
Page 421 3-4. Using the rear seat entertainment system ∗ Playing an audio CD and MP3/WMA discs Press the “DISC” button if a disc has already been loaded in the disc slot. The player will start to play the disc automatically. Remote controller ■...
Page 422 3-4. Using the rear seat entertainment system Vehicles without a navigation system Selecting a control icon Inputting the selected con- trol icon Selecting a track/file Fast-forward/rewind Play/pause Selecting a folder Turning on the audio CD and MP3/WMA mode Control screen ■...
Page 423 3-4. Using the rear seat entertainment system Turning on the audio CD and MP3/WMA mode Insert a disc or Press the “DISC” button with a disc inserted. The player will start to play the disc automatically. Selecting a track/file Press until the desired track/file number appears.
Page 424: Random Playback
3-4. Using the rear seat entertainment system Random playback Each time “RAND” is selected, the mode changes as follow: Audio CD “RAND” (random) → Off MP3/WMA “RAND” (1 folder random) → “FLD.RAND” (1 disc random) → Off Discs that can be used (→P. 397) ■...
Page 425 3-4. Using the rear seat entertainment system WMA file compatibility ● • Compatible standards WMA Ver. 7, 8, 9 • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only compatible with 2-channel playback) Ver. 7, 8, 9: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Compatible media ●...
Page 426 3-4. Using the rear seat entertainment system ID3 and WMA tags ● ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.3 ID3 tags. (The number of characters is based on ID3 Ver.
Page 427 3-4. Using the rear seat entertainment system NOTICE Discs and adapters that cannot be used (→P. 429) ■ Player precautions (→P. 430) ■...
Page 428 3-4. Using the rear seat entertainment system ∗ Playing an SD card This system can play still pictures and AVCHD video that are stored in an SD card. It does not support music playback. Press the “SD” button if an SD card has already been inserted in the SD card slot.
Page 429 3-4. Using the rear seat entertainment system Vehicles without a navigation system Displaying option screen Selecting a control icon Inputting the selected con- trol icon Selecting a chapter Fast-forward/rewind Play/pause Stop Turning on the SD card mode Main menu ■ Playing still pictures Playing AVCHD video Formatting the SD card...
Page 430 3-4. Using the rear seat entertainment system Playing still pictures Displaying the still pictures ■ You can display still pictures that are stored in an SD card. Select “Picture”. Select the desired still picture to show. Select to show the next or previous page. Selected picture is displayed on the screen.
Page 431 3-4. Using the rear seat entertainment system Option screen ■ ● Displaying the option screen Press the “OPTION” button. The option screen is displayed. Press the “OPTION” button once again or select “Hide Buttons” to turn off the control screen. “Library View”: Return to “Library View”...
Page 432 3-4. Using the rear seat entertainment system ● Slideshow settings Select “Setup”. The slideshow settings can be changed. After the settings are changed, select “OK”. Selects slideshow interval time (seconds) 5 → 10 → 15 → 30 → 60 Selects slideshow effect “Fade”...
Page 433 3-4. Using the rear seat entertainment system AVCHD video will start playing. Controls for AVCHD video (→P. 405) Press the “SD” button to return to the “SD Menu” screen. Formatting the SD card Select “Format SD Card”. Select “Yes” to format the SD card. If the SD card is formatted, all data on the card will be erased.
Page 434 3-4. Using the rear seat entertainment system SD cards that can be used (→P. 397) ■ Compatible files ■ The following files can be displayed. Picture file format: JPEG ● • Picture resolution: between 34×34 and 8192×8192 pixels • Gray scale JPEG is not supported Video file format: AVCHD ●...
Page 435 3-4. Using the rear seat entertainment system NOTICE SD card precautions ■ Failure to follow the precautions below may result in damage to the SD cards or the SD card slot. Do not insert anything other than an SD card into the SD card slot. ●...
Page 436 3-4. Using the rear seat entertainment system ∗ Using the video mode The rear seat entertainment system plays videos and sound when audio-video equipment is connected to the A/V input port. Press the “VIDEO” button to turn on the video mode. Remote controller ■...
Page 437 3-4. Using the rear seat entertainment system Using the A/V input port ■ Open the cover and connect equipment to the audio-video A/V input port. The A/V input port is com- posed of 3 input jacks. Yellow: Video input White: Left channel audio input Red: Right channel audio input Turn on the power of the audio-video equipment.
Page 438 3-5. Using the hands-free phone system (for cellular phone) ∗ Hands-free phone system (for cellular phone) features ® This system supports Bluetooth , which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone.
Page 439 3-5. Using the hands-free phone system (for cellular phone) Title Page Using the hands-free phone system ■ Operating the system by using a voice command ■ Using the hands-free phone system for P. 452 the first time ■ Menu list of the hands-free phone sys- Making a phone call ■...
Page 440 OPP (Object Push Profile) Ver. 1.1 ● For detailed information about Hands-free Phone System ■ For assistance with pairing and operating your cell phone, go to the website http://www.toyota.com/bluetooth ® About Bluetooth ■ Bluetooth is a registered trademark of Bluetooth SIG. Inc.
Page 441 3-5. Using the hands-free phone system (for cellular phone) CAUTION FCC WARNING ■ Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regula- tions, must be used with a distance of at least 7.9 in.
Page 442 3-5. Using the hands-free phone system (for cellular phone) Using the hands-free phone system Audio unit ■ Display A message, name, phone number, etc. is displayed. Lower-case characters and special characters, such as an umlaut, cannot be dis- played. Displays information that is too long to be displayed at one time on the display (press and hold)
Page 443 3-5. Using the hands-free phone system (for cellular phone) Steering wheel ■ Type A Volume The voice guidance volume cannot be adjusted using this button. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch Turns the voice command...
Page 444 3-5. Using the hands-free phone system (for cellular phone) Type B Volume The voice guidance volume cannot be adjusted using this button. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch Turns the voice command...
Page 445 3-5. Using the hands-free phone system (for cellular phone) Operating the system by using a voice command By following the voice guidance instructions output from the speaker, voice commands enable the operation of the hands-free phone sys- tem without the need to check the display or operate Operation procedure when using a voice command ■...
Page 446 3-5. Using the hands-free phone system (for cellular phone) Register a phone name by either of the following methods. a. Select “Record Name” by using , and say a name to be registered. b. Press the talk switch and say a name to be registered. A voice guidance instruction to confirm the input is heard.
Page 447 3-5. Using the hands-free phone system (for cellular phone) Menu list of the hands-free phone system Normal operation ■ Second First menu Third menu Operation detail menu Dialing a number stored in “Callback” the incoming call history memory Dialing a number stored in “Redial”...
Page 448 3-5. Using the hands-free phone system (for cellular phone) Second First menu Third menu Operation detail menu “Set PIN” Setting a PIN code “Phonebook Locking the phone book “Security” Lock” “Phonebook Unlocking the phone book Unlock” Registering the cellular phone “Pair Phone”...
Page 449 3-5. Using the hands-free phone system (for cellular phone) Using a short cut key ■ First menu Second menu Operation detail Dialing a number registered “Dial XXX (name)” in the phone book “Dial XXX (number)” Dialing the input numbers “Phone book add Adding a new number entry”...
Page 450 3-5. Using the hands-free phone system (for cellular phone) Automatic volume adjustment ■ When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less. When using a voice command ■...
Page 451 3-5. Using the hands-free phone system (for cellular phone) Making a phone call Making a phone call ■ ● Dialing by inputting a number “Dial by number” ● Dialing by inputting a name “Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory “Redial”...
Page 452 3-5. Using the hands-free phone system (for cellular phone) Dialing by inputting a name Press the talk switch and say “Dial by name”. Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b.
Page 453 3-5. Using the hands-free phone system (for cellular phone) Transferring a call A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods: a. Operate the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.
Page 454 3-5. Using the hands-free phone system (for cellular phone) The following operations can be performed: Dialing: Press the off-hook switch or select “Dial” by using a voice command or Storing the number in the phone book: Select “Store” by using a voice command or Deleting: Select “Delete”...
Page 455 3-5. Using the hands-free phone system (for cellular phone) Setting a cellular phone Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: Functions and operation procedures ■...
Page 456 3-5. Using the hands-free phone system (for cellular phone) Selecting the cellular phone to be used Select “Select Phone” by using a voice command or Pattern A Select the cellular phone to be used by either of the following methods, and select “Confirm” by using a voice command or a.
Page 457 3-5. Using the hands-free phone system (for cellular phone) Select “Confirm” by using a voice command or Listing the registered cellular phones Selecting “List Phones” by using a voice command or causes the list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”.
Page 458 3-5. Using the hands-free phone system (for cellular phone) Changing the passkey Select “Set Passkey” by using a voice command or Press the talk switch, say a 4 to 8-digit number, and select “Confirm” by using a voice command or The number should be input 1 digit at a time.
Page 459 3-5. Using the hands-free phone system (for cellular phone) Security and system setup To enter the menu of each setting, follow the steps below: Security setting items and operation procedure ■ ● Setting or changing the PIN (Personal Identification Number) 1.
Page 460 3-5. Using the hands-free phone system (for cellular phone) Changing the PIN ■ Select “Set PIN” by using a voice command or Enter the registered PIN by using a voice command or Enter a new PIN by using a voice command or When using , input the code 1 digit at a time.
Page 461 3-5. Using the hands-free phone system (for cellular phone) ® Displaying the Bluetooth device address and name Select “Device Name” using ® Turn to display the Bluetooth device address and name. Select “Go Back” using to return to “System Setup”. Initialization Select “Initialize”...
Page 462 3-5. Using the hands-free phone system (for cellular phone) Using the phone book To enter the menu of each setting, follow the steps below: ● Adding a new phone number 1. “Phonebook” → 2. “Add Entry” ● Setting speed dial 1.
Page 463 3-5. Using the hands-free phone system (for cellular phone) Adding procedure ■ Select “Add Entry” by using a voice command or Use one of the following methods to input a telephone num- ber: Inputting a telephone number by using a voice command STEP2-1 Select “By Voice”...
Page 464 3-5. Using the hands-free phone system (for cellular phone) Selecting a phone number from outgoing or incoming call history STEP2-1 Select “Call History” by using a voice command or STEP2-2 Select “Outgoing” or “Incoming” by using a voice command or STEP2-3 Select the data to be registered by either of the fol- lowing methods: a.
Page 465 3-5. Using the hands-free phone system (for cellular phone) Setting speed dials Select “Set Speed Dial (Speed Dial)” by using a voice com- mand or Select the data to be registered as a speed dial by either of the following methods: a.
Page 466 3-5. Using the hands-free phone system (for cellular phone) Changing a registered name Select “Change Name” by using a voice command or Select the name to be changed by either of the following methods. a. Press the talk switch, say desired name, and select “Con- firm”...
Page 467 3-5. Using the hands-free phone system (for cellular phone) Deleting speed dials Select “Delete Speed Dial” by using a voice command or Press the preset button for which the desired speed dial is registered, and select “Confirm” by using a voice command or Listing the registered data Selecting “List names”...
Page 468 3-6. Using the interior lights Interior lights list Your Toyota is equipped with an illuminated entry system to assist in entering the vehicle. Due to the function of the system, the lights shown in the following illustration automatically turn on/off accord- ing to whether the doors are locked/unlocked, whether the doors are opened/closed, and the engine switch position.
Page 469 20 minutes. Customization ■ That can be configured at Toyota dealer (vehicles without multi-informa- ● tion display) Settings (e.g. The time elapsed before lights turn off) can be changed.
Page 470: Lights P
3-6. Using the interior lights Personal/interior lights Personal/interior lights Front ■ Type A On/off Type B On/off Center ■ Type A On/off...
Page 471: Interior Light P
3-6. Using the interior lights Personal/interior lights and interior light Type B On/off Rear ■ On/off Interior light DOOR position The interior light comes on when a back door is opened. It turns off when the door is closed.
Page 472: Overhead Console
3-7. Using the storage features List of storage features Overhead console Glove boxes Auxiliary boxes Bottle holders Cup holders Rear console box (if equipped) Cup holder (if equipped) Front console box • Card holder • Map holder • Pen holder •...
Page 473: Glove Boxes
3-7. Using the storage features Glove boxes CAUTION Items that should not be left in the storage spaces ■ Do not leave glasses, lighters or spray cans in the storage spaces, as this may result in the following when cabin temperature becomes high: Glasses may be deformed by heat or cracked if they come into contact ●...
Page 474 3-7. Using the storage features Glove boxes and coin holder Pull the lever up. CAUTION Caution while driving ■ Keep the glove box closed. In the event of sudden braking or sudden swerv- ing, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.
Page 475 3-7. Using the storage features Front console box Front console box Pull the knob up and lift the lid. When using the front console box lid as an armrest ■ Pull the knob up and slide the lid forward. If necessary, the console box lid can slide forward.
Page 476 3-7. Using the storage features Front console box Tray in the front console box ■ The tray slides forward or backward. The tray can be removed. The box can be removed. Hanging file folders can be hung on the rails when the box is removed.
Page 477: Card Holder
3-7. Using the storage features Card holder Card holder Pull the knob up and lift the lid. CAUTION Caution while driving ■ Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 478 3-7. Using the storage features Map holder Map holder Center console Push the tab down to release the lock. Remove the lid. Stow the lid. CAUTION Caution while driving ■ Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 479 3-7. Using the storage features Map holder Front console box Pull the knob up and lift the lid. CAUTION Caution while driving ■ Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 480 3-7. Using the storage features Pen holder Pen holder Pull the knob up and lift the lid. CAUTION Caution while driving ■ Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 481 3-7. Using the storage features Tissue pocket Tissue pocket Pull the knob up and lift the lid. CAUTION Caution while driving ■ Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
Page 482 3-7. Using the storage features Rear console box Rear console box (if equipped) Upper box Push the knob and lift the lid. Lower box Pull the knob up and lift the upper box.
Page 483 3-7. Using the storage features Rear console box The separator can be used at either of two positions shown in the illus- ■ tration Change the separator position. The separator can be stowed ■ Stow the separator to the lid. Back side tray ■...
Page 484 3-7. Using the storage features Rear console box The inside tray can be removed ■ Pull the tray up. When closing the rear console box lid ■ Close the rear console box by lifting the grip on the inside of the upper box.
Page 485 3-7. Using the storage features Rear console box and overhead console CAUTION Caution while driving ■ Keep the console box closed. Injuries may result in the event of an accident or sudden braking. When opening/closing the lower box ■ Be careful not to get your hands or feet caught between the lower box and the upper box.
Page 486 3-7. Using the storage features Overhead console Type B Push the knob forward to open the console. CAUTION Caution while driving ■ Do not leave the overhead console open while driving. Items stored in it may fall out and cause injury.
Page 487 3-7. Using the storage features Cup holders Cup holders Front Front console box Pull the lid down. Rear...
Page 488 3-7. Using the storage features Cup holders Rear console box (if equipped) Attach the separator when using either console box as a cup holder. Both cup holders cannot be used at the same time. Removing the cup holder (front) ■ Push the tab down to release the lock.
Page 489 3-7. Using the storage features Cup holders Pull the cup holder up. Removing the separator (rear console box) ■ Inside Pull the separator up. Outside Pull the separator up.
Page 490 3-7. Using the storage features Cup holders The position of the separator can be changed (rear console box) ■ Inside Change the separator position. Outside Change the separator position. The separator can be adjusted (rear console box) ■ Adjust the separator.
Page 491: Bottle Holders
3-7. Using the storage features Cup holders and bottle holders CAUTION Items unsuitable for the cup holder ■ Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
Page 492: Auxiliary Boxes
3-7. Using the storage features Bottle holders and auxiliary boxes Rear NOTICE Items that should not be stowed in the bottle holders ■ Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.
Page 493 3-7. Using the storage features Auxiliary boxes Rear Pull the lid up. Rear console box (if equipped) Pull the lever up to release the lock. Pull the handle. CAUTION Caution while driving ■ Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.
Page 494 3-8. Other interior features Sun visors Main visor ■ Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. Side extender: Place in side position then slide backwards. Sub visor (if equipped) ■ Flip down.
Page 495 3-8. Other interior features Vanity mirrors Vehicles without vanity light Open the cover. Vehicles with vanity light Open the cover. The light turns on when the cover is opened. Adjust the brightness of the light.
Page 496 3-8. Other interior features Clock Adjusts the hours. Adjusts the minutes. For quicker adjustment of the clock ■ Hold down the M or H button continuously. This allows faster advancement of the minutes and hours. The clock is displayed when ■...
Page 497 3-8. Other interior features Outside temperature display Displays the outside air temperature. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C). Switches the outside air temperature display between °C (Celsius) and °F (Fahrenheit). equipped) Vehicles without multi-informa- tion display: Push the SETUP button until the desired unit of measure-...
Page 498 3-8. Other interior features When – –°C or – –°F is displayed ■ The system may be malfunctioning. Take your vehicle to your Toyota dealer. The outside air temperature is displayed when ■ The engine switch is in the ON position.
Page 499 3-8. Other interior features Portable ashtray The ashtray can be installed in a cup holder. The ashtray can be removed ■ Pull the ashtray up. CAUTION When not in use ■ Keep the ashtray closed. Injuries may result in the event of sudden braking, sudden swerving or an accident.
Page 500 3-8. Other interior features Cigarette lighter Push the cigarette lighter. The cigarette lighter will pop up when it is ready for use. The cigarette lighter can be used when ■ The engine switch is in the ACC or ON position. CAUTION To avoid burns or fires ■...
Page 501 3-8. Other interior features Conversation mirror Push the lid. The mirror can be adjusted by pushing the mirror edge. CAUTION Caution while driving ■ Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
Page 502 3-8. Other interior features Power outlets The power outlet can be used for a following component. 12 V: Accessories that run on less than 10 A. 120 V AC: Accessories that use less than 100 W. Instrument panel (12 V)
Page 503 3-8. Other interior features Inside the front console box (12 V) Pull the knob up to release the lock. Lift the lid. Back of the front console box (12 V) : Vehicles without rear seat entertainment system...
Page 504 3-8. Other interior features Back of the front console box (120 V AC) Power outlet socket Luggage compartment (12 V) : Vehicles with rear seat entertainment system The power outlet can be used when ■ 12 V The engine switch is in the ACC or ON position. 120 V AC The engine switch is in the ON position.
Page 505 Do not modify, disassemble or repair the power outlet or its inverter, in any ● way. Doing so may result in unexpected malfunctions or accidents, which could cause serious damage or injuries. Contact a Toyota dealer for any necessary repairs. To prevent injuries and accidents, securely fix all electric appliances ■...
Page 506 3-8. Other interior features NOTICE To avoid damaging the power outlet and the plug ■ Close the power outlet lid when not in use. ● Foreign objects or liquids that enter the power outlet may cause a short ● circuit. Do not use plug adaptors to connect too many plugs to the power outlet.
Page 507 If the power outlet is loose when an electrical appliance plug is con- ■ nected Replace the outlet. Contact a Toyota dealer for any necessary replacements. If the power outlet gets dirty ■ Turn the main switch off and use a soft, clean cloth to wipe it gently.
Page 508 3-8. Other interior features ∗ Seat heaters Front seat ■ The indicator comes on. Adjusts the seat tempera- ture. The further you turn the dial upward, the warmer the seat becomes. ∗ : If equipped...
Page 509 3-8. Other interior features Rear seat (vehicles with rear console box) ■ Press the LO or HI switch to warm the seats to a low or high temperature respectively. High temperature The indicator (yellow) comes Low temperature The indicator (green) comes The seat heaters can be used when ■...
Page 510 3-8. Other interior features CAUTION Burns ■ Use caution when seating the following persons in a seat with the seat ● heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
Page 511 3-8. Other interior features ∗ Seat heaters and ventilators Blows air from the seats The indicator comes on. The higher the number, the stron- ger the airflow becomes. Heats the seats The indicator comes on. The higher the number, the warmer the seats become.
Page 512 3-8. Other interior features CAUTION Burns ■ Use caution when seating the following persons in a seat with the seat ● heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled •...
Page 513 3-8. Other interior features ∗ Armrests Separated seat Adjusting to the desired angle: Lower the armrest from the highest position to the lowest position. Raise the armrest to the desired angle. Unlock the armrest: Lift the armrest to raise it to the highest position.
Page 514 3-8. Other interior features ∗ Rear side sunshades Rear door window Pull the tab up. Hook the sunshade onto the anchors. To lower the sunshade, pull the tab slightly to unhook the shade, and lower it slowly. ∗ : If equipped...
Page 515 3-8. Other interior features Rear quarter window Pull the tab up. Hook the sunshade onto the anchors. To lower the sunshade, pull the tab slightly to unhook the shade, and lower it slowly. NOTICE To ensure normal operation of the sunshade ■...
Page 516 3-8. Other interior features ∗ Seatback table Front passenger’s seatback can be used as a temporary table only when the vehicle is stopped. Fold down the front passen- ger’s seat to use the seatback table. (→P. 52) CAUTION Caution while driving ■...
Page 517 3-8. Other interior features Assist grips An assist grip (type A) installed on the ceiling can be used to sup- port your body while sitting on the seat. An assist grip (type B) installed on the pillar can be used when get- ting in or out of the vehicle and others.
Page 518 3-8. Other interior features Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eye- lets.
Page 519 ■ Do not use floor mats designed for other models or different model year ● vehicles, even if they are Toyota Genuine floor mats. Only use floor mats designed for the driver’s seat. ● Always install the floor mat securely using the retaining hooks (clips) pro- ●...
Page 520 3-8. Other interior features Luggage compartment features Tie-down hooks ■ Tie-down hooks are provided for securing loose items.
Page 521 3-8. Other interior features Cargo net hooks ■ To hang the cargo net, use the cargo net hooks. The cargo net itself is not included as original equipment.
Page 522 3-8. Other interior features Shopping bag hooks ■ To hang shopping bags, use the shopping bag hooks.
Page 523 3-8. Other interior features Auxiliary boxes ■ Type A Pull the lever upwards to lift the deck board. Type B (if equipped) Open the cover.
Page 524 3-8. Other interior features CAUTION When the tie-down hooks are not in use ■ To avoid injury, always return the tie-down hooks to their retracted positions when they are not in use. Caution while driving ■ Keep the auxiliary box closed. Injuries may result in the event of an accident or sudden braking.
Page 525 3-8. Other interior features ∗ Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices. ® The garage door opener (HomeLink Universal Transceiver) is manufac- ®...
Page 526 3-8. Other interior features Press and hold down one of the ® buttons on the HomeLink the button on the transmitter. When indicator ® HomeLink changes from a slow to a rapid flash, you can release both buttons. ® If the HomeLink indicator comes on but does not flash, or flashes rapidly for 2 seconds and remains...
Page 527 3-8. Other interior features Programming a Rolling Code system (for U.S.A. owners) ■ If your device is Rolling Code equipped, follow the steps under the ® heading “Programming the HomeLink ” before proceeding with the steps listed below. Locate the training button on the ceiling mounted garage door opener motor.
Page 528 ® the remaining HomeLink buttons. Programming other devices ■ To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. Reprogramming a button ■ ® The individual HomeLink buttons cannot be erased but can be reprogrammed.
Page 529 3-8. Other interior features ® Erasing the entire HomeLink memory (all three programs) Press and hold down the 2 out- side buttons for 10 seconds until the indicator flashes. If you sell your vehicle, be sure to erase the programs stored in the ®...
Page 530 3-8. Other interior features When support is necessary ■ Visit on the web at www.homelink.com or call 1-800-355-3515. CAUTION When programming a garage door or other remote control device ■ The garage door may operate, so ensure that people and objects are out of danger to prevent potential harm.
Page 531 3-8. Other interior features ∗ Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. Operation ■ Type A To turn the compass on or off, press the switch. Type B To turn the compass on or off, press the switch.
Page 532 3-8. Other interior features Displays and directions ■ Display Direction North Northeast East Southeast South Southwest West Northwest Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle.
Page 533 3-8. Other interior features Deviation calibration ■ Stop the vehicle where it is safe to drive in a circle. Press the switch until a number (1 to 15) appears on the com- pass display. Type A Type B Press the switch, and referring to the map above, select the number of the zone where you are.
Page 534 3-8. Other interior features Circling calibration ■ When “C” appears on the dis- play, drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed. If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.
Page 535 3-8. Other interior features NOTICE To avoid the compass malfunctions ■ Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause a malfunction of the compass sensor. To ensure normal operation of the compass ■...
Page 536 3-8. Other interior features...
Page 537 4-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition. ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.
Page 538 Precaution regarding the Blind Spot Monitor ■ If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult your Toyota dealer. NOTICE To prevent paint deterioration and corrosion on the body and compo- ■...
Page 539 4-1. Maintenance and care Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior ■ Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
Page 540 4-1. Maintenance and care Caring for leather areas ■ Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. Shampooing the carpets ■ There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam.
Page 541 4-1. Maintenance and care NOTICE Cleaning detergents ■ Do not use organic substances such as benzene or gasoline, acidic or ● alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces. Do not use polish wax or polish cleaner.
Page 542: Scheduled Maintenance
Repair and replacement ■ It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than Toyota dealer performs repairs, confirm the war- ranty coverage.
Page 543 Continue to press and hold the button until “MAINT REQD RESET MODE COMPLETE” appears on the multi-information display. Allow inspection and repairs to be performed by a Toyota dealer ■ Toyota technicians are well-trained specialists and are kept up to date ●...
Page 544 4-2. Maintenance CAUTION Warning in handling of battery ■ Engine exhaust, some of its constituents, and a wide variety of automobile ● components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.
Page 545 “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items...
Page 546: Vehicle Interior
4-2. Maintenance Vehicle interior Items Check points • Moves smoothly (without uneven Accelerator pedal pedal effort or catching)? • Can the vehicle be held securely Automatic transmission “Park” on an incline with the shift lever in mechanism • Moves smoothly? •...
Page 547: Vehicle Exterior
4-2. Maintenance Vehicle exterior Items Check points Doors • Operate smoothly? Engine hood • The lock system works properly? • Is there any leakage after park- Fluid leaks ing? • Inflation pressure is correct? • Tire surfaces not worn or dam- aged? Tire •...
Page 548 The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/ M test and may need to be repaired. Contact your Toyota dealer to service the vehicle. Your vehicle may not pass the I/M test: ■...
Page 549 • FMVSS No.116 DOT 3 or SAE Brake fluid level (→P. 572) J1703 brake fluid • Rag or paper towel • “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non-silicate, non- amine, non-nitrite and non-borate coolant with long-life hybrid organic acid technology.
Page 550 4-3. Do-it-yourself maintenance Items Parts and tools • Bulb with same number and watt- age rating as original Light bulbs (→P. 611) • Phillips-head screwdriver • Flathead screwdriver • Automatic transmission fluid ® DEXRON II or III Power steering fluid level •...
Page 551 4-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury observe the following precautions. When working on the engine compartment ■ Keep hands, clothing, and tools away from the moving fan and engine ●...
Page 552 4-3. Do-it-yourself maintenance NOTICE If you remove the air cleaner ■ Driving with the air cleaner removed may cause excessive engine wear due to dirt in the air. If the brake fluid level is low or high ■ It is normal for the brake fluid level to go down slightly as the brake pads wear or when the brake fluid level in the accumulator is high.
Page 553 4-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. Pull the hood lock release lever. The hood will pop up slightly. Pull up the hood catch lever and lift the hood. CAUTION Pre-driving check ■...
Page 554 4-3. Do-it-yourself maintenance Engine compartment Washer fluid tank (→P. 578) Brake fluid reservoir (→P. 572) Engine oil level dipstick (→P. 566) Fuse box (→P. 599) Engine coolant reservoir Battery (→P. 575) (→P. 570) Radiator (→P. 572) Engine oil filler cap Cooling fans (→P.
Page 555 4-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. Checking the engine oil ■ Park the vehicle on level ground. After turning off the engine, wait more than 5 minutes for the oil to drain back into the bot- tom of the engine.
Page 556 4-3. Do-it-yourself maintenance Adding engine oil ■ If the oil level is below or near the low level mark, add engine oil of the same type as already in the engine. Make sure to check the oil type and prepare the items needed before adding oil.
Page 557 4-3. Do-it-yourself maintenance Engine oil consumption ■ A certain amount of engine oil will be consumed while driving. In the follow- ing situations, oil consumption may increase, and engine oil may need to be refilled in between oil maintenance intervals. When the engine is new, for example directly after purchasing the vehicle ●...
Page 558 ● not dispose of used oil and filters in household trash, in sewers or onto the ground. Call your Toyota dealer, service station or auto parts store for information concerning recycling or disposal. Do not leave used engine oil within the reach of children.
Page 559: Engine Coolant
■ Visually check the radiator, hoses, reservoir cap, radiator cap, drain cock and water pump. If you cannot find a leak, have your Toyota dealer pressure test the cap and check for leaks in the cooling system. Coolant selection ■...
Page 560 4-3. Do-it-yourself maintenance CAUTION When the engine is hot ■ Do not remove the radiator cap. The cooling system may be under pressure and may spray hot coolant if the cap is removed, causing serious injuries, such as burns. NOTICE When adding engine coolant ■...
Page 561 Check the radiator and condenser and clear any foreign objects. If either of the above parts are extremely dirty or you are not sure of their condition, have your vehicle checked by your Toyota dealer. CAUTION When the engine is hot ■...
Page 562 4-3. Do-it-yourself maintenance CAUTION When filling the reservoir ■ Take care because brake fluid can harm your hands or eyes and damage painted surfaces. If fluid gets on your hands or in your eyes, flush the affected area with clean water immediately.
Page 563 4-3. Do-it-yourself maintenance Power steering fluid Fluid level ■ The fluid level should be within the appropriate range. Full (when cold) Add fluid (when cold) Full (when hot) Add fluid (when hot) Hot: Vehicle has been driven around 50 mph (80 km/h) for 20 minutes, or slightly longer in frigid temperatures.
Page 564 4-3. Do-it-yourself maintenance CAUTION Checking the fluid level ■ Take care, as the reservoir may be hot. NOTICE When adding fluid ■ Avoid overfilling, or the power steering may be damaged. After replacing the reservoir cap ■ Check the steering box case, vane pump and hose connections for leaks or damage.
Page 565 4-3. Do-it-yourself maintenance Before recharging ■ When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, before recharging: If recharging with the battery installed on the vehicle, be sure to discon- ● nect the ground cable. Make sure the power switch on the charger is off when connecting and ●...
Page 566 4-3. Do-it-yourself maintenance CAUTION Emergency measures regarding electrolyte ■ If electrolyte gets in your eyes ● Flush your eyes with clean water for at least 15 minutes and get immedi- ate medical attention. If possible, continue to apply water with a sponge or cloth while traveling to the nearest medical facility.
Page 567 4-3. Do-it-yourself maintenance Washer fluid Add washer fluid in the following situations. ● The washer does not work. ● The low washer fluid warning light comes on. (vehicles without multi-information display) ● The warning message appears on the multi-information display. (vehicles with multi-information display) Open the lid.
Page 568 4-3. Do-it-yourself maintenance CAUTION When refilling the washer fluid ■ Do not refill the washer fluid when the engine is hot or running, as the washer fluid contains alcohol and may catch fire if spilled on the engine etc. NOTICE Do not use any fluid other than washer fluid ■...
Page 569 The tire pressure warning system ■ Your Toyota is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. (→P. 636)
Page 570 Have tire pressure warning valve and trans- mitter ID codes registered by your Toyota dealer. (→P. 582) Initializing the tire pressure warning system The tire pressure warning system must be initialized in the fol- ■...
Page 571 A tire goes flat repeatedly or cannot be properly repaired due to the ● size or location of a cut or other damage If you are not sure, consult with your Toyota dealer.
Page 572 4-3. Do-it-yourself maintenance Replacing tires and wheels ■ If the ID code of the tire pressure warning valve and transmitter is not registered, the tire pressure warning system will not work properly. After driving for about 20 minutes, the tire pressure warning light comes on after blinking for 1 minute to indicate a system malfunction.
Page 573 If repeated attempts to record tire inflation pressure settings are unsuccessful, have the vehicle inspected by your Toyota dealer. When operating the tire pressure warning reset switch, the tire pres- ●...
Page 574 Do not mix tires of different makes, models or tread patterns. Also, do ● not mix tires of remarkably different treadwear. Do not use tire sizes other than those recommended by Toyota. ● Do not mix differently constructed tires (radial, bias-belted or bias-ply ●...
Page 575 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire.
Page 576 4-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure ■ The recommended cold tire inflation pressure and tire size is dis- played on the tire and loading information label. (→P. 692)
Page 577 4-3. Do-it-yourself maintenance Inspection and adjustment procedure ■ Tire valve Tire pressure gauge Remove the tire valve cap. Press the tip of the tire pressure gauge onto the tire valve. Read the pressure using the graduations of the gauge. If the tire inflation pressure is not within the recommended levels, adjust inflate the tire.
Page 578 Reduced safety ● Damage to the drive train ● If a tire needs frequent refilling, have it checked by your Toyota dealer. Instructions for checking tire inflation pressure ■ When checking tire inflation pressure, observe the following: Check only when the tires are cold.
Page 579 4-3. Do-it-yourself maintenance CAUTION Proper inflation is critical to save tire performance ■ Keep your tires properly inflated. Otherwise, the following conditions may occur and result in an accident causing death or serious injury. Excessive wear ● Uneven wear ● Poor handling ●...
Page 580 ● Bent wheels that have been straightened Wheel precautions ■ ● Use only Toyota wheel nuts and wrench designed for use with your aluminum wheels. ● When rotating, repairing or changing your tires, check that the wheel nuts are still tight after driving 100 miles (160 km).
Page 581 When replacing wheels ■ The wheels of your Toyota are equipped with tire pressure warning valves and transmitters (except for spare tire) that allow the tire pressure warning system to provide advanced warning in the event of a loss in tire inflation pressure.
Page 582 Because tire repair or replacement may affect the tire pressure warn- ● ing valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
Page 583 4-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be cleaned or changed regularly to maintain air conditioning efficiency. Removal method ■ Turn the engine switch off. Open the glove box. Remove the internal tray. Remove the inside cover by sliding up while pulling toward you.
Page 584 Hold the air gun 2 in. (5 cm) from the filter and blow for approximately 2 minutes at 72 psi (500 kPa, 5.0 kgf/cm or bar). If it is not available, have the filter cleaned by your Toyota dealer.
Page 585 4-3. Do-it-yourself maintenance Replacement method ■ Remove the air conditioning filter and replace it with a new one. The “↑UP” marks shown on the filter should be pointing up. Checking interval ■ Inspect, clean and replace the air conditioning filter according to the mainte- nance schedule.
Page 586 4-3. Do-it-yourself maintenance Wireless remote control battery Replace the battery with a new one if it is discharged. You will need the following items: ■ Lithium battery CR2032 Replacing the battery ■ Remove the cover using a coin protected with tape etc. Remove the discharged trans- mitter battery.
Page 587 ● The operational range is reduced. ● Use a CR2032 lithium battery ■ Batteries can be purchased at your Toyota dealer, jewelers, or camera ● stores. Replace only with the same or equivalent type recommended by your ● Toyota dealer.
Page 588 4-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. Turn the engine switch off. The fuses are located in the following places. To check the fuses, follow the instructions below.
Page 589 4-3. Do-it-yourself maintenance Remove the fuse with the pull- out tool.
Page 590 Type B Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type C Normal fuse Blown fuse Contact your Toyota dealer.
Page 591 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings Engine compartment ■ Fuse Ampere Circuit Multiport fuel injection system/ 15 A sequential multiport fuel injection system HORN 10 A Horn Multiport fuel injection system/ EFI NO.1 25 A sequential multiport fuel injection system IG2 MAIN 30 A...
Page 592 4-3. Do-it-yourself maintenance Fuse Ampere Circuit POWER NO.4 25 A Power windows 15 A Front fog lights Stop lights, high mounted stop- light, vehicle stability control sys- tem, anti-lock brake system, shift STOP 15 A lock system, multiport fuel injection system/sequential multiport fuel injection system, towing converter TOW BRK...
Page 593 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiplex communication system, Multiport fuel injection system/ sequential multiport fuel injection system, auto anti-glare inside rear ECU-B1 7.5 A view mirror, power front driver’s seat, power tilt and power tele- scopic, power back door, gateway Interior lights, personal lights, van- ity lights, engine switch light, foot DOME...
Page 594 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Electronically modulated air sus- AIR SUS NO.2 7.5 A pension system SPARE Spare fuse SPARE 15 A Spare fuse SPARE 30 A Spare fuse Electronically modulated air sus- AIR SUS 50 A pension system 30 A Power back door RR HTR...
Page 595 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Multiport fuel injection system/ A/PUMP NO.2 50 A sequential multiport fuel injection system HEAD LL, HEAD RL, MAIN 40 A HEAD LH, HEAD RH fuses : Replace the fuse with one of the same ampere rating as the original.
Page 596 4-3. Do-it-yourself maintenance Under the instrument panel ■ Fuse Ampere Circuit INVERTER 15 A Power outlet (120 V) FR P/SEAT LH 30 A Power front driver’s seat DR/LCK 25 A Multiplex communication system POWER No.5 30 A Power back door 7.5 A On-board diagnosis system PWR OUTLET...
Page 597 4-3. Do-it-yourself maintenance Fuse Ampere Circuit Anti-lock brake system, vehicle sta- bility control system, multiplex com- munication system, intuitive parking assist system, power front driver’s seat, power tilt and power ECU-IG No.1 7.5 A telescopic, shift lock, tire pressure warning system, accessory meter, trailer towing, power outlet, electric moon roof, power back door, head light cleaner, Blind Spot Monitor...
Page 598 (→P. 611) If the replaced fuse blows again, have the vehicle inspected by your ● Toyota dealer. If there is an overload in the circuits ■ The fuses are designed to blow, protecting the wiring harness from damage.
Page 599 Never use a fuse of a higher amperage rating than indicated, or use any ● other object in place of a fuse. Always use a genuine Toyota fuse or equivalent. ● Never replace a fuse with a wire, even as a temporary fix.
Page 600 You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer.
Page 601: Replacing Light Bulbs
4-3. Do-it-yourself maintenance Rear bulb locations ■ Stop/tail and rear side marker lights Tail lights License plate lights Rear turn signal lights Back-up lights Replacing light bulbs Headlight high beam ■ Unplug connector while depressing the lock release.
Page 602 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- wise. Headlight low beam ■ Unplug connector while depressing the lock release. Turn the bulb base counterclock- wise.
Page 603 4-3. Do-it-yourself maintenance Front turn signal/parking lights and daytime running lights ■ (if equipped) Turn the bulb base counterclock- wise. Remove the light bulb.
Page 604 4-3. Do-it-yourself maintenance Front side marker lights ■ Remove the fender liner clip. Partly remove the fender liner and turn the bulb base counter- clockwise.
Page 605 4-3. Do-it-yourself maintenance Remove the light bulb. Front fog lights (if equipped) ■ Remove the bolts and partly remove the fender liner. Unplug connector while depressing the lock release. Turn the bulb counterclockwise.
Page 606 4-3. Do-it-yourself maintenance Stop/tail and rear side marker lights, rear turn signal lights ■ Right side Open the back door and remove the cover. To protect the cover, place a rag between the flathead screwdriver or equivalent and cover as shown in the illustrations.
Page 607 4-3. Do-it-yourself maintenance Left side (vehicles with speaker in the luggage) Open the back door and remove the cover. To protect the cover, place a rag between the flathead screwdriver or equivalent and cover as shown in the illustrations. Turn the bulb bases counter- clockwise.
Page 608 4-3. Do-it-yourself maintenance Tail lights, back-up lights Remove the covers. (vehicles with power back door only) To protect the cover, place a rag between the flathead screwdriver or equivalent and cover as shown in the illustrations. Remove the nuts. Remove the rear combination light assembly in the order shown in the illustration.
Page 609 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- wise. Tail light Back-up light Remove the light bulb. Tail light Back-up light License plate lights ■ Remove the screws and light unit.
Page 610 ■ The high mounted stoplight and side turn signal light consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. Installing the fender liner clips ■...
Page 611 4-3. Do-it-yourself maintenance CAUTION Replacing light bulbs ■ Turn off the headlights. Do not attempt to replace the bulb immediately ● after turning off the headlights. The bulbs become very hot and may cause burns. Do not touch the glass portion of the light bulb with bare hands. Hold the ●...
Page 612 5-1. Essential information Emergency flashers Use the emergency flashers if the vehicle malfunctions or is involved in an accident. Press the switch to flash all the turn signal lights. To turn them off, press the switch once again. NOTICE To prevent battery discharge ■...
Page 613 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws.
Page 614 5-1. Essential information Type B Towing eyelet Emergency towing procedure ■ The engine switch must be in the ACC (engine off) or the ON (engine running) position. 4WD models: Put the front wheel drive control switch in 2WD. Put the shift lever in N. Release the parking brake.
Page 615 5-1. Essential information NOTICE To prevent causing serious damage to the transmission ■ Never tow this vehicle from the rear with the four wheels on the ground. This may cause serious damage to the transmission. Emergency towing eyelet precautions ■ Before emergency towing, check that the eyelet is not broken or damaged ●...
Page 616 5-1. Essential information Towing with a wheel lift-type truck from the front Use a towing dolly under the rear wheels. NOTICE To prevent causing serious damage to the transmission ■ Never tow this vehicle wheels on the ground. Towing with a wheel lift-type truck from the rear 2WD models Turn the engine switch to the ACC position.
Page 617 5-1. Essential information 4WD models When not using a towing dolly, turn the engine switch to the ACC position, shift the shift lever to N and put the front wheel drive control switch in 2WD. NOTICE To prevent damaging the vehicle ■...
Page 618 5-1. Essential information Using a flat bed truck If your Toyota is transported by a Front flat bed truck, it should be tied down at the locations shown in the illustration. Vehicles without electronically modulated air suspension If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°.
Page 619 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ■ ● Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.)
Page 620 5-1. Essential information Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or an air- bag inflates upon collision, the fuel pump shut off system stops sup- plying fuel to the engine. Follow the procedure below to restart the engine after the system is activated.
Page 621 Stop the vehicle immediately. The following warnings indicate the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Charging system warning light Indicates a malfunction in the vehicle’s charging sys-...
Page 622 Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: •...
Page 623 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light Warning light/Details Correction procedure Open door warning light (warning buzzer) Check that all doors are Indicates that a door or closed.
Page 624 If the light does not go off, contact your Toyota dealer. When the light flashes: Have the system Indicates a malfunction in checked by your Toyota the automatic transmis- dealer. sion system. Tire pressure warning light When the light comes on:...
Page 625 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Low fuel level warning light Refuel the vehicle. Low level of fuel. Low washer fluid warn- ing light Fill the tank. Low level of washer fluid. Maintenance required reminder light Indicates that mainte- nance is required accord-...
Page 626 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Master warning light A buzzer sounds and the warning light comes on →P. 644 and flashes to indicate that the master warning system has detected a malfunction. :Open door warning buzzer: The buzzer sounds to indicate that any door is opened (with the vehicle hav- ing reached a speed of 3 mph [5 km/h])
Page 627 If it is, tighten it securely. The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. Front passenger detection sensor and passenger seat belt reminder ■...
Page 628 If there is a lot of snow or ice on the vehicle, in particular around the ● wheels or wheel housings. If non-genuine Toyota wheels are used. (Even if you use Toyota ● wheels, the tire pressure warning system may not work properly with some types of tires.)
Page 629 If the tire pressure warning light frequently comes on after blinking for 1 minute when the engine switch is turned to the ON position, have it checked by your Toyota dealer. Customization that can be configured at Toyota dealer ■ The vehicle speed linked seat belt reminder buzzer can be disabled.
Page 630 5-2. Steps to take in an emergency CAUTION Maintenance of the tire ■ Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label).
Page 631 5-2. Steps to take in an emergency CAUTION TPMS (tire pressure warning system) malfunctions may occur for a vari- ety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly.
Page 632 Stop the vehicle immediately. The following warnings indicate the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning message Details Indicates that the engine coolant temperature is too high A buzzer also sounds.
Page 633 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning message goes off. Warning message Details Correction procedure Indicates that one or more of the doors is not fully closed.
Page 634 If the light goes off, temperature is too high you may start the A buzzer also sounds. vehicle again. If the light does not go off, contact your Toyota dealer. Indicates a malfunction Have the system in the automatic trans- checked by your Toy- mission system ota dealer.
Page 635 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that all mainte- nance according to the driven distance on the maintenance schedule should be performed If necessary, perform soon. maintenance. Comes on approximately 4500 miles (7200 km) after (U.S.A.
Page 636 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the dynamic laser cruise If the windshield wipers control system is unable are on, turn them off or to judge vehicle-to-vehi- set them to either the (if equipped) cle distance.
Page 637 5-2. Steps to take in an emergency : Refer to the separate “Scheduled Maintenance Guide” or “Owner’s Manual Supplement” for the maintenance interval applicable to your vehicle. Warning light display in vehicle-to-vehicle distance control mode ■ In the following cases, the warning light may not be displayed even if vehi- cle-to-vehicle distance closes.
Page 638 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. Before jacking up the vehicle ■ ● Stop the vehicle on a hard, flat surface. ● Press the height control mode select switch to set the height control system to manual mode (if equipped) ●...
Page 639 5-2. Steps to take in an emergency Taking out the jack and tool bag Pull the deck board up. Remove the cover and loosen the strap. Remove the tools. Tighten Loosen...
Page 640 5-2. Steps to take in an emergency Taking out the spare tire Remove the cover. Assemble the jack handle exten- sion as shown. Insert the end of the jack handle extension into lowering screw and turn it counterclock- wise.
Page 641 5-2. Steps to take in an emergency After the tire is lowered com- pletely to the ground, remove the holding bracket. Replacing a flat tire Chock the tires. Wheel Flat tire chock positions Behind the Left- rear right- hand hand side side tire Front...
Page 642 5-2. Steps to take in an emergency Slightly loosen the wheel nuts (one turn). Position the jack at the correct jack point as shown. Front Rear Front Make sure the jack is positioned on a level and solid place. Raise the vehicle until the tire is slightly raised off the ground.
Page 643 5-2. Steps to take in an emergency Installing the tire Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
Page 644 5-2. Steps to take in an emergency Firmly tighten each nut two or three times in the order shown in the illustration. Tightening torque: 154 ft·lbf (209 N·m, 21.3 kgf·m) :When used on aluminum wheel, apply 97 ft·lbf (131 N·m, 13.4 kgf·m) Stowing the flat tire, jack and all tools Remove the center wheel ornament by pushing from the reverse side.
Page 645 5-2. Steps to take in an emergency After completing the tire change ■ The tire pressure warning system must be reset. (→P. 581) When using the temporary spare tire ■ As the temporary spare tire is not equipped with the tire pressure warn- ing valve and transmitter, low inflation pressure of the temporary spare tire will not be warned.
Page 646 5-2. Steps to take in an emergency CAUTION Replacing a flat tire ■ Observe the following precautions to reduce the risk of death or serious injury. Retighten the wheel nuts within 100 miles (160 km) of driving. Other- ● wise, the nuts may loosen and the wheels may fall off, which could cause a serious accident.
Page 647 5-2. Steps to take in an emergency CAUTION Speed limit when using the temporary spare tire ■ Do not drive at speeds in excess of 50 mph (80 km/h) when a temporary spare tire is installed on the vehicle. The temporary spare tire is not designed for driving at high speeds. Fail- ing to observe this precaution may lead to an accident causing death or serious injury.
Page 648 When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and...
Page 649 5-2. Steps to take in an emergency If the engine will not start If the engine still does not start after following the correct starting procedure (→P. 159) or releasing the steering lock (→P. 160), confirm the following points. The engine will not start even when the starter motor oper- ■...
Page 650 One of the following may be the cause of the problem. ● One or both of the battery terminals may be disconnected. ● The battery may be discharged. (→P. 665) Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
Page 651 (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted.
Page 652 5-2. Steps to take in an emergency If you lose your keys New genuine Toyota keys can be made by your Toyota dealer using one of the master keys and the key number stamped on your key number plate. (→P. 32) If you lose all your master keys.
Page 653 You can call your Toyota dealer or qualified repair shop. If you have a set of jumper (or booster) cables and a second vehi- cle with a 12-volt battery, you can jump start your Toyota following the steps below. Connect the jumper cables.
Page 654 Once the vehicle’s engine has started, remove the jumper cables in the exact reverse order in which they were con- nected. Once the engine starts, have the vehicle checked at your Toyota dealer as soon as possible. Starting the engine when the battery is discharged ■...
Page 655 5-2. Steps to take in an emergency CAUTION Avoiding battery fires or explosions ■ Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from the battery. Make sure the jumper cable is connected to the correct terminal and that it ●...
Page 656 If the fan is operating: Wait until the temperature of the engine (shown on the instrument cluster) begins to fall and then stop the engine. If the fan is not operating: Stop the engine immediately and call your local Toyota dealer.
Page 657 Note that water draining from the air conditioning is normal if it has been used. Add engine coolant if required. Water can be used in an emer- gency if engine coolant is unavailable. (→P. 681) Have the vehicle checked at your nearest Toyota dealer as soon as possible.
Page 658 5-2. Steps to take in an emergency Overheating ■ If you observe the following, your vehicle may be overheating. The engine coolant temperature gauge enters the red zone or a loss of ● power is experienced. Steam is coming from under the hood. ●...
Page 659 5-2. Steps to take in an emergency If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt, or snow. Stop the engine. Set the parking brake and put the shift lever in P.
Page 660 5-2. Steps to take in an emergency If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following pro- cedure: Steadily step on the brake pedal with both feet and firmly depress it.
Page 661 5-2. Steps to take in an emergency CAUTION If the engine has to be turned off while driving ■ Power assist for the brakes and steering wheel will be lost, making the ● brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine.
Page 662 5-2. Steps to take in an emergency...
Page 663 6-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions Overall length 205.1 in. (5210 mm) Overall width 79.9 in. (2030 mm) Without roof rails 74.6 in. (1895 mm) Overall height With roof rails 77.0 in. (1955 mm) Wheelbase 122.0 in. (3100 mm) Front tread 67.9 in.
Page 664 6-1. Specifications Weight Vehicle capacity Driving Model code Engine weight system (Trailer weight + cargo) (Occupants+luggage) 1310 lb. (590 kg) USK60L-GKTSKA 7400 lb. (3357 kg) 1330 lb. (600 kg) USK60L-GKTLKA 7300 lb. (3311 kg) 5.7L V8 USK60L-GKTZKA 1315 lb. (595 kg) 7200 lb.
Page 665 Vehicle identification number ■ The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel.
Page 666: Lubrication System
6-1. Specifications Engine Model 3UR-FE and 3UR-FBE Type 8-cylinder V-type, 4-cycle, gasoline 3.70 × 4.02 in. (94.0 × 102.0 mm) Bore and stroke Displacement 345.6 cu.in. (5663 cm Valve clearance Automatic adjustment (engine cold) Drive belt tension Automatic adjustment Fuel Engine Gasoline engine Flex-fuel engine...
Page 667 6-1. Specifications Engine oil selection ■ “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toy- ota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity. Oil grade: ILSAC multigrade engine oil Recommended viscosity: SAE 0W-20...
Page 668: Cooling System
14.5 qt. (13.7 L, 12.1 Imp.qt.) Capacity Vehicles with towing package 15.4 qt. (14.6 L, 12.8 Imp. qt.) Use either of the following. • “Toyota Super Long Life Coolant” • Similar high-quality ethylene glycol-based Coolant type non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology Do not use plain water alone.
Page 669: Ignition System
Oil type and viscosity LT 75W-85 GL-5 or equivalent : Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent of matching quality to satisfy the above specification. Please con-...
Page 670: Automatic Transmission
NOTICE Automatic transmission fluid type ■ Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmis- sion of your vehicle.
Page 671 6-1. Specifications Brakes Pedal clearance 4.1 in. (104 mm) Min. 0.04 ⎯ 0.24 in. (1 ⎯ 6 mm) Pedal free play Brake pad wear limit 0.04 in. (1.0 mm) Parking brake lining wear limit 0.04 in. (1.0 mm) Parking brake pedal travel 6 —...
Page 672 6-1. Specifications Tires and wheels Type A P275/65R18 114T, Tire size P255/70R18 112T (spare tire) Front tires: 33 psi (230 kPa, 2.3 kgf/cm or bar) Tire inflation pressure Rear tires: (Recommended cold tire 33 psi (230 kPa, 2.3 kgf/cm or bar) inflation pressure) Spare tire: 33 psi (230 kPa, 2.3 kgf/cm...
Page 673: Light Bulbs
6-1. Specifications Light bulbs Light Bulbs Bulb No. Type Headlights 9005 (high beam) Headlights — (low beam) Front fog lights 9145 Front side marker lights Front turn signal/parking 4157NAK 27/8 lights Exterior Rear turn signal lights — Stop/tail and rear side 7443 21/5 marker lights...
Page 674 6-1. Specifications Fuel information Gasoline engine Your vehicle must use only unleaded gasoline. Select octane rating 87 (Research Octane Number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knocking. Persistent knocking can lead to engine damage. At minimum, the gasoline you use should meet the specifications of ASTM D4814 in the U.S.A.
Page 675 6-1. Specifications Fuel tank opening for unleaded gasoline ■ To help prevent incorrect fueling, your Toyota has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. If your engine knocks ■ Consult your Toyota dealer.
Page 676 (85% ethanol) than 10% ethanol). If you use gasohol in your Toyota, be sure that it has an octane rating no ● lower than 87. Toyota does not recommend the use of gasoline containing methanol.
Page 677 ■ Some gasoline contains octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected. The malfunction indicator lamp on the instrument cluster may come on. If this happens, contact your Toyota dealer for service.
Page 678 6-1. Specifications NOTICE When use of non-specified fuels (Flex-fuel engine) ■ The use of non-specified fuels will have a negative impact on starting and driving performance, and will cause damage to the fuel system components. Therefore, do not add fuels such as the following. •...
Page 679 6-1. Specifications Tire information Typical tire symbols Tire size (→P. 694) DOT and Tire Identification Number (TIN) (→P. 693) Location of treadwear indicators (→P. 580) Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire.
Page 680 6-1. Specifications Radial tires or bias-ply tires A radial tire has RADIAL on the sidewall. A tire not marked RADIAL is a bias-ply tire. Summer tire or all season tire (→P. 583) An all season tire has M+S on the sidewall. A tire not marked M+S is a summer tire.
Page 681 6-1. Specifications Tire size Typical tire size information ■ The illustration indicates typical tire size. Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol...
Page 682 U.S.A. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades ■...
Page 683 6-1. Specifications Treadwear ■ The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course. For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100.
Page 684 6-1. Specifications Warning: The temperature grades for this tire are established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire fail- ure.
Page 685 6-1. Specifications Tire related term Meaning 150 lb. (68 kg) times the number of occupants Normal occupant specified in the second column of Table 1 that weight follows Distribution of occupants in a vehicle as speci- Occupant distribution fied in the third column of Table 1 below The combined weight of installed regular pro- duction options weighing over 5 lb.
Page 686 6-1. Specifications Tire related term Meaning The surface area of the rim not covered by the Weather side inflated tire The part of the tire that is made of steel wires, Bead wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between components Bead separation...
Page 687 6-1. Specifications Tire related term Meaning The parting of the innerliner from cord material Innerliner separation in the carcass (a)The sidewall that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on Intended outboard the other sidewall of the tire, or sidewall...
Page 688 6-1. Specifications Tire related term Meaning A layer of rubber-coated parallel cords A parting of rubber compound between adja- Ply separation cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, Pneumatic tire when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load...
Page 689 6-1. Specifications Tire related term Meaning That portion of a tire that comes into contact Tread with the road A tread section running circumferentially Tread rib around a tire Tread separation Pulling away of the tread from the tire carcass The projections within the principal grooves Treadwear indica- designed to give a visual indication of the...
Page 690 Programming these preferences requires specialized equipment and may be performed by an autho- rized Toyota dealership. Some function settings are changed simultaneously with other functions being customized. Contact your Toyota dealer for further details. Customized Item Function...
Page 691 6-2. Customization Customized Item Function Default setting setting Wireless Push twice* remote con- Power back door oper- Push and hold trol ation One short push* → P. 33) Switch operation Push and hold One short push Wireless remote control linked operation Operation signal vol- Power back Operation when door...
Page 692 6-2. Customization Customized Item Function Default setting setting Driver’s door unlocked in All doors Door lock one step, all Unlocking using a key unlocked in (→P. 37) doors one step unlocked in two steps Open only Power Door key linked opera- windows Open and close Close only...
Page 693 6-2. Customization Customized Item Function Default setting setting 7.5 seconds Time elapsed before 15 seconds lights turn off 30 seconds Illumination Operation after the → P. 478) engine is off Operation when the doors are unlocked Seat Belt Vehicle speed linked Reminder seat belt reminder Buzzer...
Page 694 6-2. Customization Items to initialize The following items must be initialized for normal system operation in cases such as after the battery is reconnected, or maintenance is performed on the vehicle. Item When to initialize Reference • After reconnecting or changing Power back door the battery.
Page 695 6-2. Customization...
Page 696 If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Page 697 Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English.
Page 700 SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
Page 711 Abbreviation list Abbreviation/Acronym list ABBREVIATIONS MEANING Two Wheel Drive Four Wheel Drive Anti-Lock Brake System Accessory AI-SHIFT Artificial Intelligence shifting Automatic Locking Retractor A-TRAC Active Traction Control AUTO LSD Automatic Limited Slip Differential Adaptive Variable Suspension System Blind Spot Monitor Child Restraint System Electronic Control Unit Event Data Recorder...
Page 712 Abbreviation list ABBREVIATIONS MEANING Power RSCA Roll Sensing of Curtain shield Airbags Supplemental Restraint System Tire Identification Number TPMS Tire Pressure Warning System TRAC Traction Control Treadwear indicators Trailer Weight Rating Vehicle Identification Number Vehicle Stability Control...
Page 713 Alphabetical index Alphabetical index A/C........302, 310 Audio system ABS ...........255 A/V input port ......447 Active traction control.....255 Antenna......... 328 Adaptive variable suspension Audio input ......366 system ........247 Audio visual input....447 Air conditioning filter....594 AUX port ....... 366 Air conditioning system Blu-ray Disc™...
Page 714 Alphabetical index Back-up lights Child restraint system Replacing light bulbs .... 611 Booster seats, definition..132 Wattage ........ 686 Booster seats, installation ..143 Back door Convertible seats, Back door ....... 42 definition ......132 Wireless remote control..33 Convertible seats, Back window ......96 installation......142 Battery Front passenger occupant...
Page 715 Alphabetical index Climate control seat....521 Driving Clock ........506 Break-in tips ......151 Coin holder .......484 Correct posture ..... 112 Compass........541 Procedures......150 Condenser ........572 Winter driving tips ....275 Console box .....485, 492 Driving position memory ..65 Conversation mirror ....511 DVD player........
Page 716 Alphabetical index Engine Front passenger’s seat belt Compartment......565 reminder light......635 Engine switch ....... 159 Front seats Hood........564 Adjustment ......50 How to start the Front side marker lights engine ........ 159 Replacing light bulbs .....611 Identification number .... 678 Switch........188 If the engine will not start..
Page 717 Alphabetical index Height control LATCH system ......138 Electronically modulated air License plate lights suspension......242 Replacing light bulbs..... 611 Hood..........564 Wattage......... 686 Hooks Light bulbs Cargo net ......531 Replacing ......611 Shopping bag ......532 Wattage......... 686 Horn...........168 Lights Door courtesy lights ....478 Emergency flasher switch ..624 I/M test........559 Fog light switch .....
Page 718 Alphabetical index Mirrors Parking assist......221 Conversation mirror....511 Parking brake ......167 Inside rear view mirror.... 84 Parking lights Side mirror heaters....314 Replacing light bulbs .....611 Side mirrors ......87 Switch........188 Vanity mirrors ....... 505 Wattage.........686 Moon roof........99 Pen holder ........490 MP3 disc........
Page 719 Alphabetical index Rear view mirror Seat heaters ......518 Anti-glare......84, 89 Seating capacity ...... 273 Compass .......541 Seats Indicator ........236 Adjustment ......50, 54 Rear view monitor system ..228 Adjustment precaution ..53, 64 Rear window defogger ....314 Child seats/child restraint Rear window wiper ....200 system installation ....
Page 720 Alphabetical index Steering wheel Tachometer.......169 Adjustment ....... 82, 83 Tail lights Audio switches ..... 368 Replacing light bulbs .....611 Climate remote control Switch........188 switches ......317 Wattage.........686 Steering wheel memory..65 Talk switch........453 Telephone switches....453 Telephone switch.....453 Stop lights Theft deterrent system Replacing light bulbs ....
Page 721 Alphabetical index Traction control......255 Warning messages ....644 TRAC .........255 Washer Trip information .......179 Checking ....... 578 Trip meter .........169 Preparing and checking Turn signal lights before winter....... 275 Replacing light bulbs .....611 Switch ......196, 200 Switch........166 Washing and waxing ....548 Wattage.........686 Weight Cargo capacity ......
Page 722 What to do if... What to do if... A tire punctures If you have a flat tire P. 650 P. 661 If the engine will not start The engine does not start P. 107 Engine immobilizer system If the vehicle battery is discharged P.
Page 723: Instrument Cluster
What to do if... The warning light or indicator If a warning light turns on P. 633 light comes on Instrument cluster ■ Vehicles with multi-information display Vehicles without multi-information display Center panel ■...
Page 724 What to do if... ■Warning lights Brake system warning Low washer fluid light warning light P. 637 Power steering warning light P. 633 P. 634 Master warning light Charging system warning light P. 633 P. 638 Malfunction indicator Slip indicator lamp P.
Page 725: Gas Station Information
GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 564 P. 102 Hood lock release lever Tire inflation pressure P. 564 P. 685 Fuel tank capacity 26.4 gal. (100.0 L, 22.0 lmp.gal.) (Reference) Fuel type P. 679 Cold tire inflation P.

Toyota sequoia 2013 Owner's Manual

Quick Links

Related Manuals for Toyota sequoia 2013

Summary of Contents for Toyota sequoia 2013

Table of Contents