Table of Contents
Advertisement
Cleaning and care
Cleaning the fil-
ters in the inlet
hoses
Cleaning the fil-
ters in the water
intake valves
72
Cleaning the water inlet filters
The washing machine has filters to protect the water intake valves.
You should inspect the filters approximately every 6 months. Perform
this check more often if there are frequent interruptions to the external
water supply.
First turn off the stopcock.
Unscrew the water inlet hose from the stopcock.
Remove the rubber seal (1) from the recess.
Using pointed pliers, take hold of the plastic filter bar (2) and re-
move it.
Clean the plastic filter.
Reassemble in reverse order.
Turn on the stopcock and check the connection is watertight. If wa-
ter drips out, tighten the connection.
Using pliers, carefully loosen the ribbed plastic nut on the intake
valve and unscrew.
Use pointed pliers to withdraw the filter by the bar and clean it. Re-
assemble in reverse order.
The filters must be reinserted after cleaning.
Advertisement
Table of Contents
