Table of Contents
Advertisement
Automatic drain-
age
Service interval
Payment system
lock
Connector box
Automatic dis-
pensing
Dosage
Automatic water drainage can be switched on or off. Automatic water
drainage means that the suds are always drained away after the end
of a programme. This is also the case for programmes that reach the
programme end with water still in the drum.
Service
Service information can appear in the display. You can configure
whether a date or the number of operating hours is displayed.
You can select up to 3 messages with their own text.
Your message is displayed at the end of the programme and can be
acknowledged with OK. The same message appears at the end of the
next programme.
Settings
This setting allows you to determine the interval (by hours or date) at
which the message appears.
- Factory default: off
- By time
You can then select a time interval from 1–9999 hours.
- By date
You can then enter a date.
Message text
Enter your message for your planned maintenance work.
Reset display
The message appears until the display is permanently reset. The
message then appears again once the next interval is reached.
External applications
The payment device lock can be switched on or off. When the lock is
switched on, various time intervals can be selected.
External hardware is connected via the Connector Box. This can be
switched on or off.
The Connector Box must be selected in order for settings to be
made in the Dispensing menu.
Automatic dispensing can be switched on or off.
Automatic dispensing can be activated via the Connector Box or the
COM module.
The Connector Box must be switched on in order for settings to be
adopted in the Dispensing menu.
1–6 dispensing pumps can be switched on.
Further settings can be made after activating the dispensing pump.
Washing machine supervisor level
113
Advertisement
Table of Contents
