Advertisement
FACTORY CONTACT INFORMATION
If a problem with the MDP-25 persists after you have applied the above-outlined solutions, or if you have any questions
about the installation and proper operation of the MDP-25, please contact NEWMAR's Technical Services Manager:
Phone: 714-751-0488 - From the hours of 7:00 A.M. to 4:30 P.M. weekdays, P.S.T.
Fax: 714-957-1621 - Anytime
Email: techservice@newmarpower.com - Anytime
We are happy to consult with you to resolve any problems or questions you may have. If during consultation, it
appears the MDP-25 must be returned to the factory for repair we will issue a Return Materials Authorization at that
time.
SPECIFICATIONS:
INPUT: Stand-by:12 VDC, 12.2 ->15.5 VDC, 11.5 minimum input required for start up,
Maximum Input Current: 28.5 Amps (25 Amps max. Load + 3.5 Amps Charger)
Stand-by Current: <40 mA (no load on output, internal battery charged, 3 Stage charger in sleep mode)
OUTPUT: 12 VDC Filtered, Voltage Spike Protected with Back-Up Battery 25 amps Max.
BACK-UP POWER: 12.0 VDC Nominal, from 8 AH internal battery:
5 amps for 60 Minutes
10 amps for twenty Minutes
25 amps for seven Minutes
(All the above assuming fully charged battery @ 25° C)
BATTERY: Sealed Lead Acid, Rechargeable 8.0 AH, 5 Years Typical Life - User Replaceable
INTERNAL CHARGER: 2 Amps max., 3 Stage, Temperature Compensated
FILTERING: Audio through 200 MHz
VOLTAGE SPIKE PROTECTION: Transient Energy Capability; 100 Joules, 4,000 amps Max
OPERATING TEMPERATURE: 0-50° C
SIZE/WEIGHT: 5.75" H x 6.0" W x 8.5" D (14.6 x 15.24 x 51.59 cm) / 9.4 lbs. (4.3 kg)
DIMENSIONAL DRAWINGS:
P.O. Box 1306
Newport Beach
California 92663
www.newmarEVpower.com
Phone: 714-751-0488
Fax: 714-957-1621
E-Mail: techservice@newmarpower.com
6
Advertisement
