Product Care - PICO G3 Series User Manual

1. Move the Pointer
Swing the controller to move the projection lines of the virtual controller in the field of vision.
EN
2. Confirm, Turn Page
Press any area of the trackpad to confirm. Swipe the trackpad from top to bottom or left
to right to turn page.
3. Confirm/Shoot
Short press the TRIGGER button to confirm/shoot. Its functions vary in different games and
applications.
4. Back/Menu
Short press the APP button to return/go to Menu.
06
5. Screen Re-centering and Virtual Controller Centering
Look straight ahead with the headset on, point the controller horizontally right in front of
yourself, and press the controller's HOME button for more than 1 second to re-center the
screen. Drag the Menu to the facing position in the current field of vision and center the
projection lines of the virtual controller.
6. Controller Volume Adjustment
Pressing the VOLUME button on the controller can increase or decrease the volume. Long
pressing it can adjust the volume continuously.
7. Changing Dominant Hand
Go to "Settings" ► "Controller" ► "Dominant Hand".
8. Connect to a new controller under Controller Operating Mode (The headset can
only be connected to a maximum of one controller)
Unbind the current controller in "Settings" ► "Controller". Then, short press the HOME
button of the new controller or the HOME button + TRIGGER button + trackpad of the
current controller for 10 seconds. Afterward, follow the instructions on the headset screen.
9. Power off the Controller
You do not need to power off the controller manually. It will power off automatically to
save power in the following situations.
·
When the headset is in Deep Sleep mode (1 minute after taking off the headset)
·
When the headset's Bluetooth is turned off
·
When the controller is unbound in the headset's Controller Management interface
·
When the headset is powered off
10. Reset and Restart the Controller Hardware
If the controller does not respond when the HOME button and any button is pressed, or
when the virtual controller in the headset gets stuck and does not move, please pull out
and insert the battery again to restart.

Product Care

This VR headset features replaceable face cushion and straps. The face cushion and straps
are available to purchase separately. Please contact customer service, or a PICO
authorized service provider or your Sales Representative.
Headset (except the lens, face cushion), controller and accessories care
Please use disinfectant wipe (alcohol-based ingredients allowed) or use a microfiber dry
cloth to dip in a small amount of 75% alcohol and gently wipe the surface of the product
until the surface is wet and wait at least 5 minutes, then dry the surface with a microfiber dry cloth.
Note: Please avoid water into the product when cleaning.
Lens care
During use or storage, please pay attention to avoid hard objects touching the lens to
avoid lens scratches.
Use an optical lens micro-fiber cloth to dip in a little water or use a non-alcoholic
disinfectant wipes to clean the lenses. (Do not wipe the lenses with alcohol or other
harsh or abrasive cleaning solutions as this may lead to damage.)
Face cushion care
Use a sterile wipes (alcohol-based ingredients allowed) or a microfiber dry cloth dipped in
a small amount of 75% alcohol to gently wipe the surface and surrounding areas in contact
with the skin until the surface is slightly wet and hold for at least five minutes. Then leave
to dry before use. (Do not expose directly in sunlight.)
Note: The face cushion will have the following effects after repeated cleaning and disinfection.
Moreover, hand washing or machine washing is not recommended, as this will accelerate
the occurrence of the following phenomena. Please change a new face cushion if any of
the following occur:
·
·