Servicing The Engine Oil - Toro 29521 Operator's Manual

Servicing the Engine Oil

Engine-Oil Specifications
Oil Type: Detergent oil (API service SJ or later)
Engine-Oil Capacity: 1.7 L (1.8 US qt) with the filter
removed; 1.5 L (1.6 US qt) without the filter removed
Engine-Oil Viscosity: Refer to the table below.
Figure 36
Checking the Engine-Oil Level
Service Interval: Before each use or daily
Important:
Do not operate the engine with the oil
level below the Low (or Add) mark on the dipstick,
or over the Full mark.
1. Park the machine on a level surface, engage the
parking brake, shut off the engine, remove the
key, and wait for all moving parts to stop before
leaving the operating position.
2. Allow the engine to cool.
3. Check the engine-oil level as shown in
37.
g004216
Figure
4. If the oil level is low, wipe off the area around
the oil fill cap, remove cap and add the specified
oil until the oil level is at the Full mark on the
dipstick.
Note:
37
Figure 37
Do not overfill the engine with oil.
g025899
g025898