Toro 29521 Operator's Manual page 39

Service Engine Screen
3. Press down the multi-function switch.
The engine-oil maintenance reminder resets to
100.0 (hours), exits the Service Engine screen,
and returns to the default screen.
Note:
You can exit the Service Engine screen at
any time by turning the key to either the OFF or the
START positions.
Changing the Engine-Oil Filter
Service Interval: After the first 5 hours (more
often in extremely dusty or sandy
conditions).
Every 100 hours (more often in extremely dusty
or sandy conditions).
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Place a rag under the oil filter to soak up any
spilled oil.
Important:
Spilled oil may drain under the
engine. Wipe up any spilled oil.
3. Change the engine-oil filter
Figure 41
Changing
38).
(Figure 42).
g212117
Note:
Ensure that the oil-filter gasket touches
the engine, and then turn the filter an extra 3/4
turn.
4. Fill the crankcase with the specified type of new
oil; refer to
39
Figure 42
Figure 36.
g025976
g026006