Chassis Maintenance; Checking For Loose Hardware - Toro 29521 Operator's Manual

7. Secure the cover panel to the chassis with the
2 bolts and 2 washers
removed in step 3, and torque the bolts to 37 to
45 N∙m (27 to 33 in-lb)
(Figure 74) that you

Chassis Maintenance

Checking for Loose
Hardware
Service Interval: Before each use or daily
1. Shut off the engine, engage the parking brake,
remove the key, and wait for all moving parts
to stop.
2. Visually inspect machine for any loose hardware
or any other possible problem.
Note:
Tighten all loose hardware or repair the
problem before operating the machine.
59