Table of Contents
Advertisement
1. Left motion-control lever
2. Right motion-control lever
3. Front reference bar
4. Front of the machine
Driving Forward
1.
Make sure that the motion-control levers are in
the neutral position.
2.
Disengage the parking brake.
3.
To move forward in a straight line, move both
levers forward with equal pressure.
Note:
The machine moves faster the farther
the motion-control levers are moved from the
neutral position.
4.
To turn left or right, pull the motion-control lever
back toward neutral in the desired turn direction.
The tines can be in the down position when
making gradual turns.
Figure 24
5. Forward
6. Neutral
7. Reverse
Figure 25
5.
To make zero-turns, lift your foot off the tine
engagement foot switch control to raise the
tines. The head raises in 1 second.
Important:
the tines are down, otherwise you may tear
the turf.
6.
To stop the machine, move both motion-control
levers to the neutral position.
Driving in Reverse
g020241
1.
Move the motion-control levers to the neutral
position.
2.
To move rearward in a straight line, slowly move
both levers rearward with equal pressure.
3.
To turn left or right, release pressure on the
motion-control lever toward the desired turn
direction.
4.
To make zero-turns, lift your foot off the
tine-elevation switch to raise the tines. The head
raises in 1 second.
Important:
the tines are in the down position.
5.
To stop the machine, position both motion-control
levers in the neutral operate position.
Adjusting the Front
Reference/Speed-Control Bar
g016672
Adjust the front reference/speed control bar for
desired maximum forward speed.
1.
Stop the machine and move the motion-control
levers to the N
2.
Loosen the nuts on each side of the control
panel
(Figure
25
Do not make a zero-turn when
Figure 26
Do not make a zero-turn when
position.
EUTRAL
27).
g016673
Advertisement
Table of Contents
