Servicing The Engine Oil - Toro 39519 Operator's Manual

Servicing the Engine Oil

Oil Type: Detergent oil (API service SJ or later)
Engine Oil Capacity: 1.7 L (1.8 US qt) with the filter
removed; 1.5 L (1.6 UD qt) without the filter removed
Oil viscosity: Refer to the table below.
Figure 29
Changing the Engine Oil
Note:
Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil
drains completely.
2. Shut off the engine, engage the parking brake,
remove the key, and wait for all moving parts to
stop before leaving the operating position.
3. Change the engine oil as shown in
Note:
Torque drain plug to 27-33 N∙m (20-24
ft-lb).
Figure 30
g004216
4. Slowly pour approximately 80% of the specified
oil into the filler tube, and slowly add the
additional oil to bring it to the Full mark
32).
Figure 31.
g025980
33
Figure 31
g025979
(Figure