Table of Contents
Advertisement
Figure 13
1. Safe Zone — Use the machine here
2. Danger Zone - Use a walk behind machine or a hand held
tool near drop offs, ditches, embankments, water or other
hazards.
3. Water
4. W=width of the machine
5. Keep a safe distance (twice the width of the machine)
between the machine and any hazard.
•
Avoid starting, stopping or turning the machine on
slopes. Avoid making sudden changes in speed or
direction; turn slowly and gradually.
•
Do not operate a machine under any conditions
where traction, steering or stability is in question.
Be aware that operating the machine on wet
grass, across slopes or downhill may cause the
machine to lose traction. Loss of traction to the
drive wheels may result in sliding and a loss of
braking and steering. The machine can slide even
if the drive wheels are stopped.
•
Remove or mark obstacles such as ditches, holes,
ruts, bumps, rocks or other hidden hazards. Tall
grass can hide obstacles. Uneven terrain could
overturn the machine.
•
Use extra care while operating with accessories or
attachments. These can change the stability of
the machine and cause a loss of control. Follow
directions for counter weights.
•
If you lose control of the machine, step off and
away from the direction of travel of the machine.
Using the Smart
Controller/Electronic Depth
Control
Hour Meter/Tine Engagement
Display
The smart controller/electronic depth control monitors
the overall electrical system and displays information
in the hour meter/tine engagement display. The
controller displays machine hours, interlock status,
and maintenance reminders.
Screen Icons
g222486
The information screen uses the following icons:
Aerating Hours
Battery Voltage
Hour Meter
Voltage Error
Valve Solenoid Connection
Error
20
Parking brake
Engine Oil Maintenance
Transmission Oil
Maintenance
Valve Solenoid Error
Advertisement
Table of Contents
