Plot, Even Dot (P-Series High Density Graphics); Plot, Odd Dot (P-Series Normal Density Graphics) - Printronix SL5000 Series Programmer's Reference Manual

Example The following sample illustrates automatic overscoring and
overscoring reset.

Plot, Even Dot (P-Series High Density Graphics)

ASCII Code EOT
Hex Code 04
Dec Code 4
Purpose Prints dots at the even numbered dot columns.
Comment The even dot plot code is used for programming high density
graphics and must be used in conjunction with the Odd Dot Plot
code (hex 05). See "P-Series Compatible Plot Mode (Odd/Even
Dot Plotting)" on page 278 for detailed plot mode information.

Plot, Odd Dot (P-Series Normal Density Graphics)

ASCII Code ENQ
Hex Code 05
Dec Code 5
Purpose Prints dots at the odd numbered dot columns.
Comment This is the P-Series programming normal density graphics
control code. The ENQ code should occur before any printable
data in the data stream. For high density graphics, the Even Dot
Plot code (hex 04) must be used in conjunction with (and
precede) the Odd Dot Plot code. See "P-Series Compatible Plot
Mode (Odd/Even Dot Plotting)" on page 278 for detailed plot
mode information.
Plot, Even Dot (P-Series High Density Graphics)
SFCC d
SFCC 64
SFCC 100
SFCC e
SFCC 65
SFCC 101
53