Printronix T5000E series Quick Setup Manual page 22

Loading Media And Ribbon
IMPORTANT
Do not attach the ribbon to the ribbon take-up spindle without
a ribbon take-up core installed.
5. Attach the ribbon to the ribbon take-up core on the ribbon
6. Manually rotate the spindle clockwise until the clear leader has
7. Close the pivoting deck and rotate the deck lock lever fully
22
take-up spindle using the adhesive on the ribbon leader.
passed the printhead.
counterclockwise.
Media and
Ribbon Loading
Instructions
Ribbon
Take-up Core
Ribbon
Take-up Spindle
Deck Lock Lever