Table of Contents
Advertisement
1
Handle
2
ON/OFF switch
3
Lock switch
4
Machine head
5
Moving saw blade guard
6
Saw blade
7
Clamping device
8
Workpiece support
9
Table insert
10
Set screw for rotary table
11
Pointer
12
Scale
13
Rotary table
14
Fixed saw table
15
Stop rail
16a
Movable stop rail
16b
Set screw
17
Sawdust bag
18
Scale
NOTE: THIS MODEL IS DELIVERED WITHOUT LASER AND WITHOUT LED INDICATOR. THE
ILLUSTRATIONS IN THIS MANUAL MAY BE DIFFERENT THAN THE CURRENT MACHINE.
4. INTENDED USE
The mitre saw is designed to crosscut wood respective of the machine's size. The saw is not
designed for cutting firewood.
Warning! Do not use the saw to cut materials other than those specifically described in the manual.
Warning! The supplied saw blade is only intended for the sawing of wood! Do not use this blade for
the sawing of firewood!
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user/operator and not the manufacturer will
be liable for any damage or injuries of any kind caused as a result of this.
The equipment is to be operated only with suitable saw blades. It is prohibited to use any type of
cutting wheel.
19
Pointer
20
Set screw
21
Locking bolt
22
Screw for cutting depth limiting
23
Stop for cutting depth limiting
24
Adjusting screw (90°)
25
Adjusting screw (45°)
26
Flange screw
27
Outer flange
28
Saw shaft lock
29
Inner flange
30
N/A
31
N/A
32
Guide bracket
33
Tilt protection
A
90° stop angle (not supplied)
B
45° stop angle (not supplied)
C
Allen key, 6 mm
12
Advertisement
Table of Contents
