Scope Of Delivery; Intended Use - Hyundai HSO20305-A Original Instructions Manual

4. SCOPE OF DELIVERY


Drag, crosscut and mitre Saw

1 x Clamping device (8)

2 x Workpiece support (9)

Sawdust bag (21)

Hexagonal key (c)

Operating manual

5. INTENDED USE

The crosscut, drag and mitre saw is designed to crosscut wood and plastic respective of the machine's size.
The saw is not designed for cutting firewood.
Warning! Do not use the saw to cut materials other than those specified described in manual.
Warning! The supplied saw blade is only intended for the sawing of wood! Do not use this blade for the
sawing of firewood!
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind
caused as a result of this.
The equipment is to be operated only with suitable saw blades. It is prohibited to use any type of cutting
off wheel.
To use the equipment properly you must also observe the safety information, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the equipment have to be acquainted with this manual and must be in
formed about the equipment's potential hazards. It is also imperative to observe the accident prevention
regulations in force in your area. The same applies for the general rules of health and safety at work.
The manufacturer will not be liable for any changes made to the equipment nor for any damage resulting
from such changes.
Even when the equipment is used as prescribed it is still impossible to eliminate certain residual risk factors.
The following hazards may arise in connection with the machine's construction and design:

Contact with the saw blade in the uncovered saw zone.

Reaching into the running saw blade (cut injuries).

Kick-back of workpieces and parts of workpieces.

Saw blade fracturing.

Catapulting of faulty carbide tips from the saw blade.

Damage to hearing if ear-muffs are not used as necessary.

Harmful emissions of wood dust when used in closed rooms.
Please note that our equipment has not been designed for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in commercial, trade or industrial businesses or for
equivalent purposes.
18