Technical Data - Hyundai HSO14210 Original Instructions Manual

Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.
In accordance with essential applicable safety standards of European directives
Do no touch

2. TECHNICAL DATA

Model
Mains voltage/ frequency
Power
Speed
Type
Blade size
Tilting swing arm
Swivel base
Sound pressure level LpA
Sound power level LwA
Uncertainty K:
Max. Cutting depth at：
0°*0°
0°*45°
45°*0°
45°*45°
Table Tilting Range：
Saw Body Tilting：
The vibration value does not exceed 2,5 m/s²
INFORMATION
The declared vibration total value(s) and the declared noise emission value(s) have been measured in

accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value(s) and the declared noise emission value(s) may also be used in a

preliminary assessment of exposure.
WARNING:
The vibration and noise emissions during actual use of the power tool can differ from the declared values

depending on the ways in which the tool is used especially what kind of workpiece is processed.
Need to identify safety measures to protect the operator that are based on an estimation of exposure in

the actual conditions of use (taking account of all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle in addition to the trigger time).
Wear hearing protection.

HSO14210
220-240 V~50 Hz
S1:1400W; S6(25%)1700W
4900/min
Single Phase
Ø210*Ø 30*24T*2.6 mm
7000/min
45° G/D
45° G/D
93 dB(A)
104 dB(A)
3 dB(A)
115 x 60 mm
80*60 mm
115*25 mm
80*25 mm
Left45° - Right45°
45° - 45°
08