Rear-Discharging The Grass Clippings - Toro DH 220 Operator's Manual

3. Pull the grass collector dump lever forward and
tilt the grass collector
Figure 16
1. Grass collector dump lever
4. Empty the grass collector.
5. Before returning the grass collector to the
operating position, move the machine forward to
clear the grass collector of the deposited grass.
6. Slowly lower the telescoping dump lever to
return the grass collector to the operating
position.
Rear-Discharging the Grass
Clippings
Occasionally, you may need to cut the lawn without
the grass collector when the grass is too long for
collecting.
1. Disengage the locking latch
(Figure 16).
g017877
(Figure 17).
1. Locking latch
2. Disengage the blades (PTO) and move the
throttle to the Slow position.
3. Pull the grass collector dump lever forward
and tilt the grass collector
locking latch engages to lock the grass collector
in the open position
1. Grass collector dump lever
18
Figure 17
(Figure 18) until the
(Figure 19).
Figure 18
g017876
g017877