Table of Contents
Advertisement
Rear-discharging the Grass
Clippings
Occasionally, you may need to cut the lawn without the
grass collector when the grass is too long for collecting.
1. Disengage the locking latch (Figure 16).
Figure 16
1. Locking latch
2. Disengage the blades (PTO) and move the throttle
to the Slow position.
3. Pull the grass collector dump lever forward and
tilt the grass collector (Figure 17) until the locking
latch engages to lock the grass collector in the open
position (Figure 18).
1
Figure 17
1. Grass collector dump lever
1
1. Locking latch
4. Mow the grass with the grass collector in the open
position as desired.
5. Before returning the grass collector to the operating
G017876
position, move the machine forward to clear the
grass collector of the deposited grass.
6. Slowly lower the dump lever to return the grass
collector to the operating position.
Using the Optional Towing
Hitch
The machine is capable of towing non-ground-engaging
attachments with a maximum weight of 150 kg (331 lb).
1. Remove the grass collector; refer to Removing the
Grass Collector.
2. Install the attachment to the towing hitch located at
the lower rear part of the machine (Figure 19).
G017877
1. Towing hitch
17
Figure 18
1
Figure 19
1
G017883
G017878
Advertisement
Table of Contents
