Engine Maintenance; Servicing The Air Cleaner - Toro DH 220 Operator's Manual

6. Connect a grease gun to each fitting and pump
grease into it.
7. Wipe up any excess grease.
Grease Locations
Item Name
Front wheel—grease fittings
1
2 Steering ball joints
3
Steering sector gear
4 Steering pinion gear
5 Steering shaft bearing
6 Steering shaft bearing
7 Motion lever
8 Shaft hub for lifting the mower housing
9 Motion link ball joints
10 Traction idler pulley belt—grease fitting
11
Brake pedal shaft pivot points
12 Parking brake ring
13 Steering bearing
14 Left and Right Spindle—grease fittings
15 Mower housing hinged pins
16 Front axle pivot pins

Engine Maintenance

Servicing the Air Cleaner

Service Interval: Every 25 hours—Service the air
filter.
Every 100 hours/Yearly (whichever comes
first)—Replace the air filter. (Replace the air
Where to Add Grease
Quantity Interval (hours)
(pumps)
2 25
4 50
1 50
1 25
1 50
1 50
1 50
1 50
4 50
1 50
2 50
1 50
1 25
2 25
6 When removed
2 When removed
filter more frequently if the operating conditions
are extremely dusty or sandy.)
1. Park the machine on a level surface.
2. Disengage the blades (PTO).
3. Set the parking brake.
4. Stop the engine and wait for all moving parts to
stop.
5. Remove the ignition key.
22
Figure 21
Lubricant
Grease
Oil
Grease
Grease
Oil
Oil
Grease
Oil
Oil
Grease
Oil
Oil
Grease
Grease
Grease
Grease
g008270