Toro Riding Mower Safety; Sound Pressure; Sound Power; Vibration - Toro DH 220 Operator's Manual

straps should be directed down and outward from
the machine.

Toro Riding Mower Safety

The following paragraph contains safety information
specific to Toro products that is not included in the
CEN standard.
Use only Toro-approved attachments. The warranty
may be voided if you use the machine with unapproved
attachments.

Sound Pressure

This unit has a sound pressure level at the operator's
ear of 82 dBA, which includes an Uncertainty Value (K)
of 1 dBA. The sound pressure level was determined
according to the procedures outlined in EN ISO
5395:2013.

Sound Power

This unit has a guaranteed sound power level of
100 dBA, which includes an Uncertainty Value (K)
of 1 dBA. The sound power level was determined
according to the procedures outlined in ISO 11094.
CAUTION
Long-term exposure to noise while operating
the machine may cause some hearing loss.
Wear adequate hearing protection whenever
you operate the machine for an extended
period of time.

Vibration

Hand-Arm
•
Measured vibration level for right hand = 2.8 m/s
•
Measured vibration level for left hand = 2.8 m/s
•
Uncertainty Value (K) = 1.4 m/s
Measured values were determined according to the
procedures outlined in EN ISO 5395:2013.
Whole Body
•
Measured vibration level = 0.3 m/s
•
Uncertainty Value (K) = 0.15 m/s
Measured values were determined according to the
procedures outlined in EN ISO 5395:2013.
6
2
2
2
2
2