Rear-Discharging The Grass Clippings - Toro DH 210 Operator's Manual

Figure 15
2. Disengage the blades (PTO) and move the
throttle to the Slow position.
3. Pull the grass collector dump lever forward and
tilt the grass collector
Figure 16
1. TEXT HERE
4. Empty the grass collector.
5. Before returning the grass collector to the
operating position, move the machine forward to
clear the grass collector of the deposited grass.
6. Slowly lower the dump lever to return the grass
collector to the operating position.
g017876
(Figure 16).
g017877
Rear-Discharging the Grass
Clippings
Occasionally, you may need to cut the lawn without
the grass collector when the grass is too long for
collecting.
1. Disengage the locking latch
1. Locking latch
2. Disengage the blades (PTO) and move the
throttle to the Slow position.
3. Pull the grass collector dump lever forward
and tilt the grass collector
locking latch engages to lock the grass collector
in the open position
1. Grass collector dump lever
18
(Figure 17).
Figure 17
(Figure 18) until the
(Figure 19).
Figure 18
g017876
g017877