TOC
C. TROUBLESHOOTING (continued)
Problem
There is a disc jammed in
my Laminator - the tray
has stalled.
D. TECHNICAL SUPPORT
If you have difficulties in operating your Laminator, the
procedures in this manual should, in most cases, solve the
problem. If you still have difficulty, call Technical Support at
the number listed on the insert in your Laminator suppy pack.
12 Maintenance and Troubleshooting
Resolution
Most likely the disc is not seated
•
properly in the tray. Clear the jam
by opening the top cover, and
removing the disc from the
laminator. If the Overlaminate
film has torn, it can be reattached
to the supply roll. Once the jam
has been cleared, close the cover
and press the Laminate button;
the job will continue.
INDEX