Primera Accent User Manual page 7

TOC
Top Cover is: Tray is:
Closed In, without disc
Closed Out, without disc
Closed Out, with disc
Open Out OR In with
Heat Roller ON
Open In, with Heater OFF
Open Out, with Heater OFF
Disc Tray
The contains a
allow you to choose whether or not to laminate the center hub
of the disc.
The Access Cover opens to provide access to the
Film.
This illustration shows the input ports found on the rear panel
of the Laminator. If you are using the Laminator with an
automated duplicator, the USB port will be used to allow the
computer to control the Disc Tray.
Power Switch Power Port
The Power Switch turns the Laminator's power on and starts
the warm-up process.
The USB Interface is only used when connecting the Laminator
to a Duplicator when using Record, Print and Lamination
mode.
The Auxiliary Interface is only used when connecting the
Laminator in place of a printer on a Duplicator when using
Stand-Alone Lamination Mode.
Function:
Move Tray OUT
Heats Laminator
Roller
temperature
Will laminate if Heat
Roller is at operating
temperature
Turns Heat Roller OFF
Moves Disc Tray OUT
Moves Disc Tray IN
Disc Hub Spacer
USB Interface Port
INDEX
Heat
to operating
with two settings to
Overlaminate
Auxiliary Port
Getting Started 3