Primera Accent User Manual page 10

TOC
2. Remove the
packaging. The film comes pre-rolled on a core with a
separate Take-Up Core included in the package.
3. Place the Take-Up Core in the front of the Laminator
between the black plastic Ribbon Drive Hubs as shown.
The left-side Hub is spring loaded. The Right side Hub has
tabs that will engage and lock in place with the notches in
the right side of the Take-Up Core.
4. Insert the
the Laminator as shown, keeping in mind that the
Laminate will feed from over the top of the roll and the
notches in the core will need to face the right-side of the
laminator to lock in place with the ribbon drive hub.
5. The white portion of the leading edge of Overlaminate film
has an adhesive coating. Pull it forward as shown,
attaching it to the front Take-Up core. Turn the Take-Up
Core towards the front of the laminator over the top to
ensure the Overlaminate film is securely attached.
When properly loaded the film will feed from over the top
of the supply roll in back and will travel over the top of the
Take-Up Core in front.
1
6 Lamination Film and Optical Media
Overlaminate Film
Overlaminate Film
2
INDEX
and Take-Up Core from its
Supply
Take-Up
in the rear set of hubs inside
3