Section 3 − Definitions; Additional Safety Symbols And Definitions; Symbols And Definitions - Miller Dimension NT 450 Owner's Manual

3-1. Additional Safety Symbols And Definitions

.
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Disconnect input plug or power before working on machine.
GND/PE, Ground/Protective Earth

3-2. Symbols And Definitions

Output
Percent
Panel/Local
Shielded Metal Arc
(SMAW)
Alternating Current
(AC)
SECTION 3 − DEFINITIONS
Input
Input Power Or In-
put Voltage
Remote
Gas Tungsten Arc
Welding (GTAW)
.
A complete Parts List is available at www.MillerWelds.com
Off
A
Amperage
Gas Metal Arc
Welding (GMAW)
Air Carbon Arc
Gouging
Safe1 2012−05
Safe30 2012−05
Safe 114 2013−04
On
V
Voltage
CC
Lift-Arc TIG
OM-2252 Page 11