AeroPilates PRO REFORMER 5102 Owner's Manual page 9

ASSEMBLY INSTRUCTIONS
STEP 4
Remove the paper covering from the foam tape inside the FRONT COVER(3). Place the FRONT COVER(3)
over the FRONT FRAME(1) and press the cover securely into place.
STEP 5
Make sure that the threaded holes in the FOOTBAR(5) are facing toward the end of the AeroPilates® Pro
Reformer 5102 as shown in the illustration. Insert the FOOTBAR(5) into the mounting holes located in the
FRONT COVER(3) and FRONT FRAME(1). Insert the FOOTBAR(5) all the way to the bottom and lock it
in place with the LOCKING KNOBS(26).
NOTE: You can choose to insert the CARDIO REBOUNDER(50) into the FRONT FRAME(1) and lock in
position with the LOCKING KNOBS(26). Refer to the inset drawing.
9