AeroPilates PRO REFORMER 5102 Owner's Manual page 16

OPERATIONAL INSTRUCTIONS
PLATFORM ROLLER REPLACEMENT
To replace a platform roller, first remove the platform by releasing the cords and sliding the platform all the
way back to the top end or rear frame of the machine. Tip your machine on its side, bend the machine at
the hinge, and simply slide the platform off the frame.
Turn the platform upside down so it is cord side up. Using a crescent wrench and flat head screwdriver,
remove the screw that is holding the roller in place. Replace the old roller with the new one, add the washer,
push the screw through the roller and tighten with the nut.
1 2 3 4
WEBSITE RESOURCES
You can find use and maintenance instructional video clips at www.staminaproducts.com and
www.aeropilates.com.
16