Advertisement
Operator Laptop/PC – Minimum Requirements
There are two different sets of minimum requirements for the customer-furnished laptop/PC
depending on how much software is to be run on the unit:
Only SBES User Interface:
Moderate size laptop
For example:
Gb Ethernet
4GB RAM memory
Windows 10 (64 bit mandatory)
Personal Safety
The projector connections must be handled
with great care, as the output power voltage is
hazardous to human safety.
Do not pull out the cables with power on.
Equipment Safety
Do not transmit without transducers connected, as this may damage the E20 unit.
To disconnect the connectors from the E20, first
unscrew the locking sleeves (at the arrows) before
pulling the connectors out.
Do not pull directly on the cables, as this will damage
both the cables and the E20.
Do not bend the cables beyond the recommended
limits when positioning the cables. Flexing the cable
to less than the specified bend radius will damage the
cable.
Do not place any objects on top of the E20 and do
not expose the unit to direct sunshine, as this may
cause the unit to overheat.
* For further details, please refer to the appropriate manual.
EU Uncontrolled Technology:
Information contained herein is uncontrolled under the E.U. Regulation (EC) No 428/2009.
Version 6
Use and Disclosure of Data
However, export, reexport or diversion contrary to law is prohibited.
Document Number QG19389 / Part Number 1013740
Echotrac E20
Singlebeam Echosounder - Quick Reference Guide*
SBES User Interface and Teledyne PDS*:
CPU: high-end quad core processor
Gb Ethernet
Graphic card: with OPENGL 3.30 support and
4GB memory, e. g. NVidia GeForce GTX 9xx
8GB RAM memory
Hard disk: 1 x 1TB
For system requirements, check:
www.teledyne-pds.com/support/pds-system-requirements/
22/01/2021
Advertisement
