Table of Contents
Advertisement
2. Orient the two Uprights (1) as shown.
Next, orient the Crossbar (2) so that the warning
decals (A) are in the position shown.
Attach the Crossbar (2) to one of the Uprights (1)
with two M8 x 65mm Bolts (33), an Upright Plate
(35), and two M8 Locknuts (34); do not fully
tighten the Locknuts yet.
Attach the Crossbar (2) to the other Upright
(1) in the same way.
3. Attach the Front Leg (4) to the Frame (3) with
two M8 x 45mm Bolts (28), two M8 Washers
(29), and two M8 Locknuts (34). Make sure that
the Locknuts are in the indicated hexagonal
holes (B); do not tighten the Bolts yet.
2
1
3
28
29
B
4
8
2
1
34
35
A
34
3
34
33
Advertisement
Table of Contents
