Haier GE Connect Series Service Manual page 76

Maintenance
Step
2. Remove the fan.
3. Remove motor.
4. Install the motor.
74
Fan and Motor Removal
Note: Be sure to isolate power before removing the fan.
Picture
CONNECT SERIES SERVICE MANUAL
Work instruction
Use a wrench to remove the
specialized nut and gasket of the
fan.
Note: Please keep the nut and
gasket safe after removing them
from the fan.
Use a screwdriver to unscrew the
bolt of motor.
Note: Motor wire should be first
removed from the electric box.
Replace with a new motor. Then
tighten up the screw bolt.