Multiple Subscriber Access Numbers - Polycom ReadiVoice Release Note

ReadiVoice systems simultaneously. In addition, since it's a native Windows program, the Windows
Operator offers enhanced performance.
Note: ReadiVoice v2.56.0 is expected to be the final release in which the Java Operator is supported.Please contact your
Polycom account manager if you have questions concering the phase out of the Java Operator.
System Requirements
The Windows Operator application requires a PC with:
•
A 2 GHz or better processor, 512 MB RAM (1 GB recommended), and at least 100 MB free disk space.
•
Windows 2000 or Windows XP operating system.
•
Internet Explorer 5.5 or later (needed only for installation and for accessing the ReadiVoice Provisioning
interface).
•
Network connectivity to the ReadiVoice server (CACS) from which to get the application.
•
Network connectivity to the other ReadiVoice servers, if the operator station will monitor multiple
ReadiVoice systems.
Installation and Configuration
To install the Windows Operator application, you simply click a link to download the self-extracting client
and follow the prompts. See the ReadiVoice Windows Operator Guide for complete installation and operation
instructions.
Windows Operator Linked to Provisioning
The production release of Windows Operator provides operators with a quick way to change account settings
for a subscriber. The Windows Operator GUI now has a link to the Edit Subscriber provisioning page.
Subscribers' names appear as a red link. If required, the operator will be prompted to enter a provisioning
username and password. When successful, the system displays the provisioning page for the chosen
subscriber. (1-4281834)

2.2 Multiple Subscriber Access Numbers

Feature Description
ReadiVoice v2.56.0 makes it possible to assign a subscriber four or more access number sets at the same time
via a new PSPI (Provisioning Stored Procedure Interface) procedure called AddSubAndANString.
(1-1XERY/1-6028520) Each access number set consists of an access number, a hidden number, a shared flag
identifying the type of access number (private or shared), and a number type (Toll, Toll-free, etc.).
AddSubAndANString is similar to AddSubAndAN_v2550(), but the three sets of access number parameters
have been replaced by AccessNumberString, which can contain up to 720 characters. Assuming ten-digit
phone numbers, this enables a single stored procedure call to assign up to 27 access numbers to a subscriber.
(This string supports a minimum of 10 access numbers.)
ReadiVoice v2.56.0 Release Notes
Polycom, Inc. Page 6
3725-70002-009G2
Confidential and Proprietary