Polycom ReadiVoice Release Note page 43

Defect or
ECR #
1-4478406 A bug was fixed on the T3 card that
caused the T1s to stay in a BLUE
alarm state at boot time in certain
circumstances. Code was added to
correct the error.
1-3905305 File access across the network was
fixed on the VCE to prevent excessive
delays during network outages.
1-4777206 When loading a DSP manually using
the xdspiLoadImg xhelp command, an
error sometimes occurred leaving the
card in an unusable state where a
reboot was necessary to recover. The
code was corrected to prevent this from
happening.
1-4777280 The 6201 DSPs on the PMOD can
1-3648201 sometimes lock up or lose
synchronization on the second stream
into the conference DSP when the
clocks are double-driven for short
periods. Code was added to detect an
out-of-sync condition and self-correct.
Also, monitoring was added so that a
DSP could be reloaded if it was
determined to be dead.
1-4850401 An issue on the 480 platform caused
cards to not communicate with each
other. Code was added to correct the
problem.
A critical log that happened at startup
1-5297317
was removed because it complained
about an issue that did not really exist.
1-5340312 Channels could leave conference but
not be correctly removed by the
conference which caused confusion
and could lead to "bleed through" to
other conferences. Code was added to
address this issue.
1-5343257 Most NETI messages were changed to
use RESRCHNDL instead of
board/span/ts to make searching the
logs easier and more consistent.
3725-70002-009G2
Confidential and Proprietary
Description
Page 43
Resolution
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed
ReadiVoice v2.56.0 Release Notes
Polycom, Inc.