OPERATION
• The appearance or accessories of the product may differ depending on the model.
Status Display
PM10
5
㎍/㎥
3
[Fan Mode]
Add-on Display
• Up to three icons are displayed
• Icons are shown or displayed
according to display priority.
– Button Lock > Timer > Filter
Replacement Notification >
UVnano > Wi-Fi Connection
• UVnano function is applied only
to models applied UVnano
Icon
Description
Displays when the control
panel is locked.
Displayed when the sleep
timer is set.
Displays when it is time to
replace the filter.
Displayed when the
UVnano setting is enabled.
Displayed when the UVnano is
not working normally. (Check
if the filter and air intake cover
are properly installed.)
Displays Wi-Fi (if connected),
and allows remote control.
(You can set the warming
operation time up to 8 hours.)
16
PM10
5
㎍/㎥
25°
3
[Heating Mode]
Status display
• Air quality, PM10/PM2.5/
PM1.0 dust concentration, odor,
temperature, humidity, and
operation status are displayed.
Fan Speed Display
• Displays Fan speed from Auto,
Steps 1 to 10 and Turbo.
Heating Target Temperature
Display
• Displays the set temperature of
the warm air ranging from 16 °C
to 30 °C.
h The heating target temperature is
displayed only during heating.
EN
EN