Changing How Participants Dial Or Are Dialed - Polycom ReadiManagerSE200 Software Manual

Polycom ReadiManager SE200 Outlook Scheduling Guide

Changing How Participants Dial or Are Dialed

Note:
2–8
Figure 2-8 Appointment Recurrence Dialog Box
3 When you are done, click OK.
You can change the dialing methods of video endpoints for a selected
conference. The settings to change are:
• Dial Type. You can specify how this video endpoint is dialed— through
IP or ISDN (if available for the endpoint). The default setting is IP.
• Device. If more than one video endpoint is associated with the room or
person, you can select another from the drop-down list.
• Dial Options. In a conference that uses an MCU, you can specify whether
the device dials in or is called by the MCU.
— If you select Dial-In for one or more individual resources, a dial-in
number and pass code are created and sent to you and other
participants in the reservation confirmation e-mail.
— If you select Dial-Out, the MCU dials the conference attendees who
have selected the Use Video check box at the scheduled conference
time.
You can change the dialing options only when Dial In/Dial Out is
allowed in the conference template. In addition, audio-only
conferences are always dial-in.