6. Assembly instructions
The HEATFLOW S5 can only be used with single wall pipe, refer to the Annex B section for
shielded single wall pipe.
The HEATFLOW S5 cannot be used with Heat shield (AC02762), lowered ceiling, inside an
alcove or in a mobile home.
THE HEATFLOW S5 CANNOT HAVE CLEARANCES TO COMBUSTIBLE MATERIALS
REDUCED**
1. Remove the air baffle
(BB) by removing the 4
screws (AA) at the
back of stove.
Installation Instruction HEATFLOW S5
Wear protective gloves for the following instructions
WARNING
English
6
46310A
2023-05-25