Table of Contents
Advertisement
12
180P LCD
Go to cover page
The monitor will detect various display situation automatically. When
the monitor detects the problems, the screen will show the different
warning signals to remind you what is happen to your monitor.
NO VIDEO INPUT
This screen appears if there is no video signal input. Please check
that the signal cable is properly connected to the video card of PC.
ATTENTION
NO VIDEO INPUT
VIDEO INPUT SELECTED
This windows appears 3 seconds that show you which video input
has selected by monitor when every time you turn on the monitor.
ATTENTION
ANALOG VIDEO INPUT SELECTED
USE OSD MENU TO CHANGE
DEFAULT INPUT SELECTION
CANNOT DISPLAY THIS VIDEO MODE..
This screen warns when the input frequency from the computer is not
a standard video mode or out of the monitor's scanning range.
Please change the display mode of the operating software in the
computer(i.e. Windows) to 1280 x 1024@ 60Hz for best display
results.
ATTENTION
CANNOT DISPLAY THIS VIDEO
MODE, CHANGE COMPUTER DISPLAY
INPUT TO 1280 X1024@60HZ
91.1 KHz
In this case, the picture will still showing on the screen about 60
seconds then shut down by monitor. Attention message will
disappear as well after 30 minutes remaining then enter power
saving state. (No picture, power indicator showing amber.)
USE 1280 X 1024 FOR BEST RESULT
This message appears at the top of the OSD window when the video
mode input is not the recommended 1280x1024. Other modes may
result in some picture distortion. Please adjust the video mode to
1280x1024 at 60Hz for best display quality.
USE 1280 x 1024 FOR BEST RESULT
Back
OSD Attention signals
85.0Hz
ENTERING SLEEP MODE
This screen appears when the monitor is about to enter the sleep
mode. Please press any key on the keyboard or click the mouse to
wake up the monitor and computer.
ATTENTION
ENTERING SLEEP MODE
THIS IS BEST PICTURE SHARP
When you expand picture size by using OSD menu "ADJUST
SIZE/USER SETTINGS", during the adjustment, Once the pixels
number of horizontal size has reached 1280 pixels, following
window will appear on the screen that remind you the resolution of
video signal was expanded exactly can match the LCD panel
(1280X1024).
ATTENTION
THIS IS BEST PICTURE SHAPE
WAIT FOR AUTOMATIC ADJUSTMENT
This screen appears when you touch the
disappear when the monitor is properly adjusted.
ATTENTION
WAITING FOR AUTOMATIC
ADJUSTMENT
SECOND VODEO IS NOT AVAILABLE
When you select video input between Analog or Digital signal via
INPUT SELECTION function of OSD menu, if the one you are
selecting is not available, following message will appear on the
screen then switching back to the previous setting automatically.
ATTENTION
SECOND VIDEO
NOT AVAILABLE
button. It will
Forward
Advertisement
Table of Contents
