Osd Attention Signal - Philips 150P4CG Service Manual

http://www.jdwxzlw.com/?fromuser=华盛维修
10 150P4 LCD
Go to cover page
The monitor will detect various display situation automatically. When
the monitor detects the problems, the screen will show the different
warning signals to remind you what is happen to your monitor.
NO VIDEO INPUT
This screen appears if there is no video signal input. Please check
that the signal cable is properly connected to the video card of PC
and make sure PC is on.
ATTENTION
NO VIDEO INPUT
CANNOT DISPLAY THIS VIDEO MODE..
This screen warns when the input frequency from the computer is not
a standard video mode or out of the monitor's scanning range.
Please change the display mode of the operating software in the
computer(i.e. Windows) to 1024 x 768@ 60Hz for best display results.
ATTENTION
CANNOT DISPLAY THIS VIDEO
MODE, CHANGE COMPUTER DISPLAY
INPUT TO 1024X768@60HZ
ATTENTION
THIS IS 85HZ OVERSCAN,
CHANGE COMPUTER DISPLAY
INPUT TO 1024X768@60HZ
ENTERING SLEEP MODE
This screen appears when the monitor is about to enter the sleep
mode. Please press any key on the keyboard or click the mouse to
wake up the monitor and computer.
ATTENTION
ENTERING SLEEP MODE
家电维修资料网，免费下载各种维修资料
OSD Attention signals
USE 1024 X 768 FOR BEST RESULT
This message appears at the top of the OSD window when the video
mode input is not the recommended 1024x768. Other modes may
result in some picture distortion. Please adjust the video mode to
1024x768 at 60Hz for best display quality.
WAIT FOR AUTOMATIC ADJUSTMENT
This screen appears when you touch the
disappear when the monitor is properly adjusted.
CHECK CABLE CONNECTION
This message appears when a signal cable is disconnected while
computer is working.
USE 1024x768 FOR BEST RESULT
ATTENTION
WAITING FOR AUTOMATIC ADJUSTMENT
ATTENTION
CHECK CABLE CONNECTION
button. It will