Osd Attention Signal - Philips 150X3M Service Manual

12 150X3M LCD
Go to cover page
The monitor will detect various display situation automatically. When
the monitor detects the problems, the screen will show the different
warning signals to remind you what is happen to your monitor.
NO VIDEO INPUT
This screen appears if there is no video signal input. Please check
that the signal cable is properly connected to the video card of PC
and make sure PC is on.
ATTENTION
NO VIDEO INPUT
ENTERING SLEEP MODE
This screen appears when the monitor is about to enter the sleep
mode. Please press any key on the keyboard or click the mouse to
wake up the monitor and computer.
ATTENTION
ENTERING SLEEP MODE
USE 1024 X 768 FOR BEST RESULT
This message appears at the top of the OSD window when the video
mode input is not the recommended 1024x768. Other modes may
result in some picture distortion. Please adjust the video mode to
1024x768 at 60Hz for best display quality.
USE 1024x768 FOR BEST RESULT
OSD Attention signals
WAIT FOR AUTOMATIC ADJUSTMENT
This screen appears when you touch the
disappear when the monitor is properly adjusted.
SECOND VIDEO IS NOT AVAILABLE
When you select video input between Analog or Digital signal via
INPUT SELECTION function of OSD menu, if the one you are
selecting is not available, following message will appear on the
screen then switching back to the previous setting automatically.
ATTENTION
WAITING FOR AUTOMATIC ADJUSTMENT
button. It will