Philips 150S Electronic User's Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Monitor
  5. 150S
  6. Electronic user's manual
Philips 150S Electronic User's Manual

Philips 150S Electronic User's Manual

Philips user's manual monitor 150s
Hide thumbs Also See for 150S:
Table of Contents

Advertisement

Quick Links

Philips 150S Electronic User's Manual
file:///D|/Philips LCD/english/150S/Index.htm [1/20/2001 3:11:41 PM]

Advertisement

Table of Contents
loading

Related Manuals for Philips 150S

Summary of Contents for Philips 150S

  • Page 1 Philips 150S Electronic User's Manual file:///D|/Philips LCD/english/150S/Index.htm [1/20/2001 3:11:41 PM]...

  • Page 2: Safety And Troubleshooting Information

    Do not store or use the LCD monitor in locations exposed to heat, direct sunlight, or extreme cold. Avoid moving the LCD monitor between locations with large temperature differences. Choose a site file:///D|/Philips LCD/english/150S/SAFETY/SAFETY.HTM (1 of 3) [1/20/2001 3:11:45 PM] •...
  • Page 3 Handling the monitor with care prevents scratching and damage. If the monitor becomes damaged, immediately disconnect the power from the unit and have it checked by a qualified service person before using it again. file:///D|/Philips LCD/english/150S/SAFETY/SAFETY.HTM (2 of 3) [1/20/2001 3:11:45 PM] RETURN TO TOP OF THE PAGE...
  • Page 4 To prevent fire or electrical shock, do not drop the monitor. When moving the monitor, be sure to unplug all power cords in order to avoid injury or damage to the equipment. file:///D|/Philips LCD/english/150S/SAFETY/SAFETY.HTM (3 of 3) [1/20/2001 3:11:45 PM] RETURN TO TOP OF THE PAGE...
  • Page 5 Other Documents You May Need About This Guide This electronic user's guide is intended for anyone who uses the Philips 150S LCD Monitor. It describes the LCD monitor's features, setup, operation and other pertinent information. Its contents are identical to the information in our printed version.
  • Page 6 ©1999 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics N.V. file:///D|/Philips LCD/english/150S/ABOUT/ABOUT.HTM (2 of 2) [1/20/2001 3:11:52 PM]...

  • Page 7: Product Information

    • Effective viewing area • Display Colors VIDEO • Video dot rate • Input impedance - Video - Sync file:///D|/Philips LCD/english/150S/PRODUCT/PRODUCT.HTM (1 of 5) [1/20/2001 3:12:01 PM] • Resolution & Preset Modes • Physical Specification RETURN TO TOP OF THE PAGE TFT LCD 15’...

  • Page 8: Optical Characteristics

    * These information are subject to change without notice. Resolution & Preset Modes • Maximum • Recommended 14 USER DEFINABLE MODES 14 factory preset modes: file:///D|/Philips LCD/english/150S/PRODUCT/PRODUCT.HTM (2 of 5) [1/20/2001 3:12:01 PM] 700m Vpp Separate sync Composite sync Positive and negative XGA Hsync 48- 60 KHz, Vsync 60 - 75 Hz (N.I.)
  • Page 9 VESA Mode Video Active Stand-by Blanked Suspend Blanked Blanked file:///D|/Philips LCD/english/150S/PRODUCT/PRODUCT.HTM (3 of 5) [1/20/2001 3:12:01 PM] Mode Resolution IBM VGA 10h 640*350 IBM VGA 3h 720*400 IBM VGA 12h 640*480...

  • Page 10: Energy Star

    * These information are subject to change without notice. Pin Assignment The 15-pin D-sub connector (male) of the signal cable: Assignment Red video input Green video input file:///D|/Philips LCD/english/150S/PRODUCT/PRODUCT.HTM (4 of 5) [1/20/2001 3:12:01 PM] ® compliant. s an NERGY ®...
  • Page 11 Blue video ground Views Follow the links to see various views of the monitor and its components. Front View Product Description file:///D|/Philips LCD/english/150S/PRODUCT/PRODUCT.HTM (5 of 5) [1/20/2001 3:12:01 PM] Identical output - connected to pin 10 Serial data line (SDA) H.

  • Page 12: Installing Your Lcd Monitor

    UP and DOWN buttons are used when adjusting the OSD of your monitor LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. file:///D|/Philips LCD/english/150S/INSTALL/INSTALL.HTM (1 of 2) [1/20/2001 3:12:04 PM] Installing the Protective Cover •...

  • Page 13: Optimizing Performance

    Click on the link to know more about this program. More about FPadjust Program file:///D|/Philips LCD/english/150S/INSTALL/INSTALL.HTM (2 of 2) [1/20/2001 3:12:04 PM] RETURN TO TOP OF THE PAGE Flat Panel Adjust (FP Adjust) program, a program for getting the best...

  • Page 14: Description Of The On-Screen Display

    Description of the On Screen Display What is the On-Screen Display? This is a feature in all Philips LCD monitors which allows an end-user to adjust screen performance of monitors directly through an on-screen instruction window. The user interface provides user-friendliness and ease-of-use when operating the monitor.
  • Page 15 Below is an overall view of the structure of the On-Screen Display. You can use this as reference when you want to later on work your way around the different adjustments. file:///D|/Philips LCD/english/150S/OSD/OSDDESC.HTM (2 of 4) [1/20/2001 3:12:10 PM] RETURN TO TOP OF THE PAGE...
  • Page 16 On-Screen Display RETURN TO TOP OF THE PAGE file:///D|/Philips LCD/english/150S/OSD/OSDDESC.HTM (3 of 4) [1/20/2001 3:12:10 PM]...
  • Page 17 On-Screen Display file:///D|/Philips LCD/english/150S/OSD/OSDDESC.HTM (4 of 4) [1/20/2001 3:12:10 PM]...

  • Page 18: Customer Care And Warranty

    Bangladesh • China • Hong Kong • India • Indonesia • Japan • Korea • Malaysia • Pakistan • Philippines • Singapore • Taiwan • Thailand AFRICA: Morocco • South Africa MIDDLE EAST: Dubai • Egypt file:///D|/Philips LCD/english/WARRANTY/WARRANTY.HTM [1/20/2001 3:12:12 PM]...
  • Page 19 A way of describing the color of a radiating source in terms of the temperature (in degrees Kelvin) of a black body radiating with the same dominant frequency as the source. Most Philips monitors offer the possibility of setting the color temperature to any desired value. Energy Star Computers Programme An energy conservation programme launched by the US Environmental Protection Agency (EPA) with the primary aim of promoting the manufacture and marketing of energy-efficient office automation equipment.
  • Page 20 Glossary Vertical refresh rate Expressed in Hz, it is the number of frames (complete pictures) written to the screen every second. file:///D|/Philips LCD/english/150S/GLOSSARY/GLOSSARY.HTM (2 of 2) [1/20/2001 3:12:14 PM] RETURN TO TOP OF THE PAGE...

  • Page 21: Download And Print

    2. From the menu that appears, choose 'Save Link As...', 'Save Target As...' or 'Download Link to Disk'. 3. Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). file:///D|/Philips LCD/english/DOWNLOAD/DOWNLOAD.HTM (1 of 2) [1/20/2001 3:12:18 PM] • Installing FPadjust Program Mac.
  • Page 22 Choose where you would like to save the file; click 'Save' (if prompted to save as either 'text' or 'source', choose 'source'). Exit your browser and install the FPadjust Program. Read the "ReadMe.txt" file before installing. file:///D|/Philips LCD/english/DOWNLOAD/DOWNLOAD.HTM (2 of 2) [1/20/2001 3:12:18 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...

  • Page 23: Faqs (Frequently Asked Questions)

    Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1024x768, 60Hz. Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. Turn on your monitor and then turn on your PC What does "refresh rate"...
  • Page 24 (approximately up to the hardness of a 2H pencil). In general, it is recommended not to expose the panel surface to any excessive shocks or scratches. An optional protective cover with greater scratch resistance is also available. file:///D|/Philips LCD/english/150S/SAFETY/SAF_FAQ.HTM (2 of 9) [1/20/2001 3:12:36 PM]...
  • Page 25 America) open the 150P up to most PC and workstation users. Handy hot keys on the chin of the 150P make switching between two different video sources a breeze. Can the Philips LCD Monitor be hung on the wall or used as touch panel? Yes, Philips Brilliance LCD monitors have this optional feature. The standard VESA mount holes on inside removable back cover integrate with a VESA FPMPMI standard arm, which include both a VESA compatible mount bracket and external AC adapter.

  • Page 26: Screen Adjustments

    CustoMax® is proprietary Philips software that allows users to adjust monitor via software instead of control keys under Windows base. With the Philips Brilliance 150P, CustoMax® operates via a USB connection to PC. All Philips 150P models are CustoMax® compatible, but your computer must support USB in order to use CustoMax®.

  • Page 27: Compatibility With Other Peripherals

    Can I connect my LCD monitor to any PC, workstation or Mac? Yes, all Philips LCD monitors are fully compatible with standard PC, Mac and workstation. You may need a cable adapter to connect the monitor to your Mac system. Please contact your dealer/reseller for more information.

  • Page 28: Lcd Panel Technology

    (your mouse pointer will appear to move more smoothly across the screen, for example). The passive matrix LCD has a grid of conductors with pixels located at each intersection in the grid. file:///D|/Philips LCD/english/150S/SAFETY/SAF_FAQ.HTM (6 of 9) [1/20/2001 3:12:36 PM] RETURN TO TOP OF THE PAGE...
  • Page 29 Also IPS (In Plane Switching) or MVA (Multi Vertical Aligned) is used for wider viewing angle. file:///D|/Philips LCD/english/150S/SAFETY/SAF_FAQ.HTM (7 of 9) [1/20/2001 3:12:36 PM]...

  • Page 30: Ergonomics, Ecology, And Safety Standards

    UL Standards. Does the LCD monitor conform to general safety standards? Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 95-99 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment, and recyclability.
  • Page 31 FAQs (Frequently Asked Questions) RETURN TO TOP OF THE PAGE file:///D|/Philips LCD/english/150S/SAFETY/SAF_FAQ.HTM (9 of 9) [1/20/2001 3:12:36 PM]...

  • Page 32: Troubleshooting

    Philips dealer. Common Problems Having this problem? No Picture (Power LED not lit) No Picture (Power LED is amber or yellow) Screen says file:///D|/Philips LCD/english/150S/SAFETY/saf_troub.htm (1 of 3) [1/20/2001 3:12:36 PM] • FAQs • Common Problems • Imaging Problems •...
  • Page 33 Image vibrates on the screen Vertical flicker appears Horizontal flicker appears The screen is too bright or too dark file:///D|/Philips LCD/english/150S/SAFETY/saf_troub.htm (2 of 3) [1/20/2001 3:12:36 PM] The Auto Function is designed for use on standard Macintosh or IBM-compatible PC running Microsoft properly Windows.
  • Page 34 Green, red, blue, dark, and white dots remains For further assistance, refer to the distributor. file:///D|/Philips LCD/english/150S/SAFETY/saf_troub.htm (3 of 3) [1/20/2001 3:12:36 PM] Consumer Information Centers RETURN TO TOP OF THE PAGE If an image remains in the...

  • Page 35: Regulatory Information

    Current information regarding TCO'99 approved and labeled products may also be obtained via the Internet, using the address: http://www.tco-info.com/ Environmental Requirements file:///D|/Philips LCD/english/150S/SAFETY/REGS/REGULAT.HTM (1 of 7) [1/20/2001 3:12:38 PM] • Energy Star Declaration • Polish Center for Testing and Certification Notice •...
  • Page 36 Power Saving Position A2 ® s an NERGY ® NERGY guidelines for energy efficiency. file:///D|/Philips LCD/english/150S/SAFETY/REGS/REGULAT.HTM (2 of 7) [1/20/2001 3:12:38 PM] RETURN TO TOP OF THE PAGE PHILIPS 150P1* 140S1* 150B1* PHILIPS artner, has determined that this product meets...
  • Page 37 N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. file:///D|/Philips LCD/english/150S/SAFETY/REGS/REGULAT.HTM (3 of 7) [1/20/2001 3:12:38 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 38 To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. file:///D|/Philips LCD/english/150S/SAFETY/REGS/REGULAT.HTM (4 of 7) [1/20/2001 3:12:38 PM] RETURN TO TOP OF THE PAGE...
  • Page 39 IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. file:///D|/Philips LCD/english/150S/SAFETY/REGS/REGULAT.HTM (5 of 7) [1/20/2001 3:12:38 PM] RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 40 Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. Please find out about the local regulations on how to dispose of your old monitor from your local Philips dealer. Information for UK only file:///D|/Philips LCD/english/150S/SAFETY/REGS/REGULAT.HTM (6 of 7) [1/20/2001 3:12:38 PM]...
  • Page 41 Regulatory Information file:///D|/Philips LCD/english/150S/SAFETY/REGS/REGULAT.HTM (7 of 7) [1/20/2001 3:12:38 PM] 3-pin plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.

  • Page 42: Other Related Information

    Use a Cord Set consisting of a minimum 18 AWG cord and grounding type attachment plug rated 15 A, 250 V. The Cord Set should have the appropriate safety approvals for the country in which the equipment will be installed and / or be marked HAR. file:///D|/Philips LCD/english/150S/SAFETY/saf_other.htm [1/20/2001 3:12:38 PM] • FAQs •...

  • Page 43: Philips Pixel Defect Policy

    TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type.

  • Page 44: Proximity Of Pixel Defects

    In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in the following tables.
  • Page 45 Philips Pixel Defect Policy RETURN TO TOP OF THE PAGE file:///D|/Philips LCD/english/150S/PRODUCT/PIXEL.HTM (3 of 3) [1/20/2001 3:12:52 PM]...

  • Page 46: Connecting To Your Pc

    Optimizing Performance Accessories (optional) : Installing the Protective Cover Accessory Pack Unpack all the parts. file:///D|/Philips LCD/english/150S/INSTALL/CONNECT.HTM (1 of 6) [1/20/2001 3:12:58 PM] Power Cable (socket may differ for different countries) Macintosh Adapter (optional) VGA Signal Cable • Accessory Pack •...
  • Page 47 Connecting to Your PC Connecting to Your PC file:///D|/Philips LCD/english/150S/INSTALL/CONNECT.HTM (2 of 6) [1/20/2001 3:12:58 PM] E-DFU package with Quick Setup Guide, Using Your Monitor Manual, and CD-ROM. AC / DC Adaptor RETURN TO TOP OF THE PAGE To remove the back cover, use a coin to disengage the clips on each side, then pull from the bottom at lift.
  • Page 48 Connecting to Your PC file:///D|/Philips LCD/english/150S/INSTALL/CONNECT.HTM (3 of 6) [1/20/2001 3:12:58 PM] Remove the plastic ring from the hinge Plug in the video cable into VGA connector, and connect DC power cord into DC inlet...
  • Page 49 Connecting to Your PC file:///D|/Philips LCD/english/150S/INSTALL/CONNECT.HTM (4 of 6) [1/20/2001 3:12:58 PM] Cover the cables with the plastic ring and put the ring back on the hinge NOTE: If you use an Apple Macintosh™, you need to connect the special Mac adapter to one end of...
  • Page 50 Connecting to Your PC file:///D|/Philips LCD/english/150S/INSTALL/CONNECT.HTM (5 of 6) [1/20/2001 3:12:58 PM] Replace the back cover on the monitor...
  • Page 51 Plug the power cord of your computer and your monitor into a nearby outlet. Turn on your computer and monitor. If the monitor displays an image, installation is complete. file:///D|/Philips LCD/english/150S/INSTALL/CONNECT.HTM (6 of 6) [1/20/2001 3:12:58 PM] RETURN TO TOP OF THE PAGE...

  • Page 52: Getting Started

    Restart your computer and repeat step on the third bullet point to verify that your PC is set at 1024x768, 60Hz (for 150P / 150B) or 1280x1024, 60Hz (for 181AS). Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. Turn on your monitor and then turn on your PC.

  • Page 53: Installing The Protective Cover

    Using a medium-sized coin, press in (A) and then twist (B) to disengage the clip in one of the opening. Repeat for the rest of the openings. file:///D|/Philips LCD/english/150S/INSTALL/P_COVER/pcov_inst.htm (1 of 4) [1/20/2001 3:12:59 PM] • Connecting to Your PC •...
  • Page 54 Installing the Protective Cover Pull up and forward to remove the front bezel from the monitor. file:///D|/Philips LCD/english/150S/INSTALL/P_COVER/pcov_inst.htm (2 of 4) [1/20/2001 3:12:59 PM] Peel off the film on both sides of the protective cover.

  • Page 55: Cleaning Instructions

    Clip the protective cover onto the monitor, engaging only the top two clips. Now press the bottom corners of the protective cover to engage the two side clips. Cleaning Instructions The anti-scratch, anti-reflective cover protects the LCD screen file:///D|/Philips LCD/english/150S/INSTALL/P_COVER/pcov_inst.htm (3 of 4) [1/20/2001 3:12:59 PM] RETURN TO TOP OF THE PAGE...
  • Page 56 Installing the Protective Cover Cleaning Instructions: Wipe with a soft dry cloth Do not use alcohol solvents or other strong chemical file:///D|/Philips LCD/english/150S/INSTALL/P_COVER/pcov_inst.htm (4 of 4) [1/20/2001 3:12:59 PM] RETURN TO TOP OF THE PAGE...

  • Page 57: Installing The Wall Mount Kit

    Front View Product Description Started • Optimizing Performance Accessories (optional) : Installing the Wall Mount Kit file:///D|/Philips LCD/english/150S/INSTALL/M_KIT/mkit_inst.htm (1 of 3) [1/20/2001 3:12:59 PM] Installing the Protective Cover • Connecting to Your PC • • Installing the Wall Mount Kit...
  • Page 58 Installing Your Wall Mount Kit file:///D|/Philips LCD/english/150S/INSTALL/M_KIT/mkit_inst.htm (2 of 3) [1/20/2001 3:12:59 PM] Detach the monitor base by pulling away the two parts. Fix the mount bracket to the desired location.
  • Page 59 Installing Your Wall Mount Kit file:///D|/Philips LCD/english/150S/INSTALL/M_KIT/mkit_inst.htm (3 of 3) [1/20/2001 3:12:59 PM] RETURN TO TOP OF THE PAGE Thread all cables through the hole at the bottom of the bracket and use the clip provided to hold them in place.
  • Page 60 … to continue to the CONTRAST window by pressing the CONTROLS window will appear Smart Help Note: You can also adjust the brightness from the MAIN CONTROLS window. See BRIGHTNESS & CONTRAST for details. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (1 of 16) [1/20/2001 3:13:10 PM] • The OSD Tree • Language •...
  • Page 61 4) Press the button to confirm your selection and return to MAIN CONTROLS window. CLOSE MAIN CONTROLS is highlighted. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (2 of 16) [1/20/2001 3:13:10 PM] button on the monitor until LANGUAGE is highlighted)

  • Page 62: Adjust Position

    The MAIN CONTROLS window appears. LANGUAGE is highlighted. 2) Press the button until ADJUST POSITION is highlighted. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (3 of 16) [1/20/2001 3:13:10 PM] button. RETURN TO TOP OF THE PAGE button until ADJUST POSITION...
  • Page 63 … to continue to BRIGHTNESS & CONTRAST, press the Help BRIGHTNESS & CONTRAST is highlighted. Next, follow steps 3 - 6 under BRIGHTNESS & CONTRAST. … to exit completely, press the file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (4 of 16) [1/20/2001 3:13:10 PM] button until button. button to move the...

  • Page 64: Brightness & Contrast

    The MAIN CONTROLS window appears. LANGUAGE is highlighted. 2) Press the button until BRIGHTNESS & CONTRAST is highlighted. 3) Press the button. The BRIGHTNESS & CONTRAST window appears. BRIGHTNESS is highlighted. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (5 of 16) [1/20/2001 3:13:10 PM] RETURN TO TOP OF THE PAGE...

  • Page 65: Video Noise

    OSD SETTINGS. Note: Before adjusting VIDEO NOISE yourself, press the AUTO button on the front panel. If there is no improvement, then return to adjust PHASE and CLOCK. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (6 of 16) [1/20/2001 3:13:10 PM] button until CONTRAST is highlighted. Next, press the button until VIDEO NOISE is button.
  • Page 66 The VIDEO NOISE window appears. PHASE is highlighted. 4) Press the button to adjust the phase. 5) When finished with PHASE, press the button to adjust the clock. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (7 of 16) [1/20/2001 3:13:10 PM] button until CLOCK is highlighted. Next, press the...

  • Page 67: Adjust Color

    The MAIN CONTROLS window appears. LANGUAGE is highlighted. 2) Press the button until ADJUST COLOR is highlighted. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (8 of 16) [1/20/2001 3:13:10 PM] button. RETURN TO TOP OF THE PAGE (not available on all models)
  • Page 68 The OSD Controls 3) Press the button. The ADJUST COLOR window appears. 4) Press the button to select ORIGINAL PANEL COLOR, 9300K FOR CAD/CAM, 6500K FOR IMAGE MANAGEMENT, or USER PRESET. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (9 of 16) [1/20/2001 3:13:10 PM]...
  • Page 69 6.1) If USER PRESET is highlighted, press the button to adjust the color red. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (10 of 16) [1/20/2001 3:13:10 PM] button to confirm your selection and return to the MAIN CONTROLS button to highlight RED. Next, press the...

  • Page 70: Osd Settings

    OSD SETTINGS allows you to do this. It is composed of HORIZONTAL and VERTICAL adjustments you can make by simply following the step below. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (11 of 16) [1/20/2001 3:13:10 PM] button to highlight GREEN. Next, press the button to highlight BLUE. Next, press the...
  • Page 71 MAIN CONTROLS window left or right to the desired position. 5) Press the button until VERTICAL is highlighted. Press the CONTROLS window up or down to the desired position. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (12 of 16) [1/20/2001 3:13:10 PM] button to move the MAIN...
  • Page 72 1) Press the button on the monitor. The MAIN CONTROLS window appears. LANGUAGE is highlighted. 2) Press the button until PRODUCT INFORMATION is highlighted. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (13 of 16) [1/20/2001 3:13:10 PM] button. RETURN TO TOP OF THE PAGE button until PRODUCT...

  • Page 73: Reset To Factory Settings

    RESET TO FACTORY SETTINGS is highlighted. Next, start with step 3 under RESET TO FACTORY SETTINGS and follow the directions. … to exit completely, press the RESET TO FACTORY SETTINGS file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (14 of 16) [1/20/2001 3:13:10 PM] button. RETURN TO TOP OF THE PAGE button until...
  • Page 74 YES or NO. NO is the default. YES returns all settings except language to their original factory adjustments. 5) Press the button to confirm your selections and return to the MAIN CONTROLS window. CLOSE MAIN CONTROLS is highlighted. file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (15 of 16) [1/20/2001 3:13:10 PM]...
  • Page 75 The OSD Controls Smart Help After returning to MAIN CONTROLS… Smart … to exit completely, press the Help Close Main Controls file:///D|/Philips LCD/english/150S/OSD/OSD_CONT.HTM (16 of 16) [1/20/2001 3:13:10 PM] button. RETURN TO TOP OF THE PAGE RETURN TO TOP OF THE PAGE...
  • Page 76 Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.

  • Page 77: Your International Guarantee

    12 months from date of purchase. This international Philips guarantee complements the existing national guarantee obligations to you of dealers and Philips in the country of purchase and does not affect your statutory rights as a customer.
  • Page 78 Where IS SERVICE AVAILABLE? Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local...
  • Page 79 Please contact Philips at: (800) 479-6696 Three years free parts and three years free labor will be provided at Philips Canada depot or any one of its authorized service centers. (In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose.
  • Page 80 Just a phone call away Philips’ customer help desks are located worldwide. You can contact Philips Monday - Friday from 08.00 - 20.00 hrs Central European Time (CET) and on Saturdays and Sundays from 10.00 to 18.00 hrs CET by using one of the toll-free numbers.

This manual is also suitable for:

150s1c150s1c-00h150s1c-00z150s1c-05z150s1c74150s1l-00h ... Show all

Table of Contents