Electrical Warnings - IKEA HYGIENISK Manual

ENGLISH
Installation, including water supply and
electrical connections, and repairs must be
carried out by a qualified technician. Follow
the installation instructions supplied with
the appliance. Remove all the packaging and
make sure that it has not been damaged
during transport. In the event of problems,
contact the dealer or your nearest
Authorised Service Centre. Do not install or
use a damaged appliance.
Do not use the appliance before
installing it in the built-in structure. The
appliance must be disconnected from the
power supply before any installation
operation - risk of electric shock. During
installation, make sure the appliance does
not damage the power cable - risk of fire or
electric shock. Only activate the appliance
when the installation has been completed.
Install the appliance in a safe and
suitable place that meets installation
requirements. Keep the minimum distance
from other appliances and units. Do not
install or use the appliance where the
temperature is less than 0 °C. Carry out all
cabinet cutting works before fitting the
appliance in the furniture and remove all
wood chips and sawdust.
If the furniture panel is not installed,
open the appliance door carefully to avoid
the risk of injury. After installation, make
sure the plastic covers are locked in position.

Electrical warnings

Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power supply.
Do not use extension leads, multiple
sockets or adapters. The appliance must be
earthed. Always use a correctly installed
shockproof socket. The electrical
components must not be accessible to the
user after installation. Do not operate this
appliance if it has a damaged power cable or
To download the full version visit www.ikea.com
Damage or removal of the plastic covers on
the sides of the door may impact the
functionality of the appliance and may cause
an injury. If the plastic cover is damaged,
contact the Authorized Service Centre to
replace it.
Do not cause damage to the water
hoses. Before connection to new pipes, pipes
not used for a long time, where repair work
has been carried out or new devices fitted
(water meters, etc.), let the water flow until it
is clean and clear. Ensure that there are no
visible water leaks during and after the first
use of the appliance.
WARNING: Dangerous voltage. The water
inlet hose has a safety valve and a sheath
with an inner mains cable.
If the water inlet hose is damaged,
immediately close the water tap and
disconnect the mains plug from the mains
socket. Contact the Authorised Service
Centre to replace the water inlet hose.
plug, if it is not working properly, or if it has
been damaged or dropped.
Connect the mains plug to the mains
socket only at the end of the installation. Do
not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
This appliance is fitted with a 13 A mains
plug. If it is necessary to change the mains
plug fuse, use only a 13 A ASTA (BS 1362) fuse
(UK and Ireland only).
7