Step 1 - Select Inputs - Polycom EF2201 Application Note

Step 4
Step 5
Step 6
Figure 3. The steps of using the InstantDesigner software – either 6 steps or 9 steps are
required depending on whether sound reinforcement is required for the design.
As we shall see, there are either 6 steps (without sound reinforcement) or 9 steps
required to design the complete audio and video conferencing system.
Click Next to start the wizardry of the Polycom InstantDesigner.
Step 1 – Select Inputs
The first step of Polycom InstantDesigner is to select the types and quantities of
inputs that are required in the audio design. The types of inputs that can be
selected include:
• Microphones – including table, ceiling, lectern, and wireless microphones
No Sound Reinforcement
Select
Devices
Connect Inputs and
Outputs
Create Conference
Composer Project
Select
Inputs
Select
Outputs
Use Sound
Reinforcement
?
Use Sound
Reinforcement
Define Zones
Set Zone
Reinforcement Levels
Select
Devices
Connect Inputs and
Outputs
Create Zone Reports
Create Conference
Composer Project
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
7