Getting Started With Polycom Instantdesigner - Polycom EF2201 Application Note

The list keeps growing and growing. Imagine what you can do with Vortex
products now – perform more conference designs with your current team, create
new conferencing applications, build more expertise within your team, etc. If you
haven't tried the Vortex products – you can't afford not to.
Sit back, grab a cup of coffee, and learn how we are trying to make your job
easier.
3.

Getting Started with Polycom InstantDesigner

To use Polycom InstantDesigner simply start Conference Composer. You will be
presented with the screen shown in Figure 1.
Figure 1. Conference Composer startup screen.
From here there are three choices
1. Autoscan for Devices retrieves the settings from the Vortex devices and
puts them into Conference Composer– this requires that you be connected
to a Vortex via an RS232 connection.
2. Create Project with Polycom InstantDesigner begins the instant design
process.
3. Open Existing Project opens a previously designed Vortex project.
Selecting Create Project with Polycom InstantDesigner will start the Polycom
InstantDesigner process and bring you to the screen in Figure 2. If you are
already running Conference Composer you may start Polycom InstantDesigner by
5