Cisco Nexus 9504 Hardware Installation Manual page 52

Aci-mode switch

Hide thumbs Also See for Nexus 9504:

Table of Contents

Optic Transceiver Removal Using the Optics Extraction Tool

Step 1

Remove the fiber-optic cables from the transceiver module before removing the transceiver module.

Step 2

Use the wide side of the optics extraction tool to release the bale latch (see the following image).

Step 3

Use the narrow end of the optics extraction tool to carefully remove the transceiver module (see the following

image).

Step 4

Place the transceiver module in an antistatic bag or other protective environment.

Cisco Nexus 9504 ACI-Mode Switch Hardware Installation Guide

Connecting the Switch to the ACI Fabric

Table of Contents