Cisco Nexus 9504 Hardware Installation Manual page 13

Overview
Note
Note
Note
• Fan trays (three) (N9K-C9504-FAN) or (N9k-9504-FAN2) in slots FAN 1 to FAN 3 (Modules 41 to 43
in reports) (numbered from left to right on the chassis)
• Power supplies (up to two with the combined power mode, up to three with n+1 power redundancy mode,
or up to four with the n+n power redundancy mode) in slots PS 1 to PS 4 (Modules 33 to 36 in reports)
(numbered from left to right on the chassis)
Note
Note
All chassis slots are numbered from left to right or from top to bottom.
The following figure shows the hardware features seen from the front of the chassis.
When using FM-G fabric modules, any empty slots should be filled with
FAN-PWR modules (N9K-C9504-FAN-PWR)
When using N9K-C9504-FM or N9K-C9504-FM-E fabric modules, any
empty slots should be filled with N9K-C9504-FM-CV.
For more information about Line card and fabric module compatibility, see
the Cisco Nexus 9500 Platform Line Cards and Fabric Modules Data Sheet
• Cisco Nexus 9500 Series 3-kW AC power supply (N9K-PAC-3000W-B)
• Cisco Nexus 9500 Series 3-kW Universal AC/DC power supply (N9K-PUV-3000W-B)
• Cisco Nexus 9500 Series 3.15-kW Dual Input Universal AC/DC power supply
(N9K-PUV2-3000W-B)
• Cisco Nexus 9500 Series 3-kW (-48 V) DC power supply (N9K-PDC-3000W-B)
The switch can be powered by a mix of AC, DC, HVAC/HVDC power
sources.
Cisco Nexus 9504 ACI-Mode Switch Hardware Installation Guide
Overview
3