Table of Contents
Advertisement
Setting
To Change the PIN code lock setting
Select Off, On1, or On2 with the Point
"Quit" with the Point
close the dialog box.
To Change the PIN code
The PIN code can be changed to your desired four-digit
number.
Select "PIN code change" with the Point
the SET button. The New PIN code input dialog box will
appear.
Select a number with the Point
with the SET button.
number. When the four-digit number is fixed, the pointer will
automatically move to "Set".
Be sure to note the new Logo PIN code and keep it at hand.
Note:
If you forget your PIN code and unable to start operating the projector, the PIN code
can be reset to the factory default setting (1234) according to the following procedure
When you reset the PIN code, the Logo PIN code will be reset, as well.
.
1. Disconnect the AC Power Cord from the AC outlet.
2. As pressing the SET button on the projector, connect the AC Power Cord into an
AC outlet again. Keep pressing the SET button until the POWER indicator lights.
The PIN code will be returned to the factory default setting while the PIN code
lock state will remain the same as previous set state.
Fan
This function provides you the following alternatives in the cooling
fans operation after turning off the projector.
L1 . . . . . . . .normal operation. Cooling the projector for 90
seconds after turning off the projector.
L2 . . . . . .slower operation than the normal (L1) , but takes
longer to cool down the projector. Cooling the
projector for 120 seconds after turning off the
projector.
Lamp counter reset
This function is used to reset the lamp replace counter. When
replacing the projection lamp, reset the lamp replace counter by
using this function. See page 51 for operation.
Factory default
This function returns all setting values except for the PIN code
lock, the Logo PIN code lock, the User logo and the lamp counter
to the factory default settings.
46
7 8
button and then
d d
button and press the SET button to
d d
button, and press
7 8
button and fix the number
Repeat it to complete entering a four-digit
Then press the SET button.
Change the PIN code lock setting
Change the PIN code
The input numbers
are being displayed
for confirmation.
Fan
Factory default
Select a desired
setting with the
Point 7 8 button.
Select PIN code
change and press
the SET button. The
New PIN code input
dialog
box
will
appear.
Select Factory
default and this box
appears. Select
[Yes] , and the next
box appears.
Select [Yes] to
activate it.
Advertisement
Table of Contents
