Table of Contents
Advertisement
Computer Input
Image Level Adjustment
1
Press the MENU button and the On-Screen Menu will
appear. Press the Point
pointer to the Image Adjust Menu icon.
2
Press the Point
the item that you want to adjust, and then press the SET
button. The level of each item is displayed. Adjust each
level by pressing the Point
Contrast
Press the Point
7
button to decrease contrast and the Point
button to increase contrast. (From 0 to 63.)
Brightness
Press the Point
7
button to adjust image darker and the Point
button to adjust image brighter. (From 0 to 63.)
Color temp.
Press the Point
7
button or the Point
level that you want to select. (XLow, Low, Mid, or High)
White balance (Red)
Press the Point
7
button to deepen red tone. (From 0 to 63.)
White balance (Green)
Press the Point
button to lighten green tone and the Point
7
button to deepen green tone. (From 0 to 63.)
White balance (Blue)
Press the Point
7
button to lighten blue tone and the Point
button to deepen blue tone. (From 0 to 63.)
Sharpness
Press the Point
7
button to soften the image and the Point
button to sharpen the image. (From 0 to 15.)
Gamma
Press the Point
7 8
(From 0 to 15.)
Reset
Resets all adjustment to their previous levels.
Store
To store the image data adjusted manually, move the red frame
pointer to the Store icon and press the SET button. The message
"OK?" will appear. Select [Yes] to store manual adjustment.
To set this manual adjustment, select Custom by pressing the IMAGE
button or through the Image Select Menu (p31).
Quit
Closes the Image Adjust Menu.
32
7 8
button to move the red frame
d d
button to move the red frame pointer to
7 8
button.
8
button for Color temp.
button to lighten red tone and the Point
button to obtain better balance of contrast.
Image Adjust Menu
8
8
8
8
8
8
Image Adjust Menu icon
Move the red frame pointer to
the item to be selected and
then press the SET button.
Selected Image level
Press the Point 7 8 button to
adjust value.
Store icon
Press the SET button at this
icon to store the adjustment.
"OK?" message
Move the pointer to [Yes] and
then press the SET button.
Advertisement
Table of Contents
