Table of Contents
Advertisement
All electrical wiring must be in compliance with the appropriate I.E.E. and local
Electricity Board regulations and carried out by a qualified electrician, e.g. your local
Electricity Board or a contractor who is on the roll of the National Inspection Council
For Electrical Contracting (N.I.C.E.I.C.).
Each oven is equipped with a data plate which can be found on the right hand side of
the inner frame when the oven door is open, indicating the rated input and voltage at
which the oven should operate.
This oven must be fitted with a 13 amp plug to BS 1363 incorporating a 13 amp (BS
1362) fuse and supplied via a suitable 13 amp switched socket, placed in an accessible
position adjacent to the oven.
For your safety please read the following information:
The electrical connections of the appliance must be carried out in compliance with
the provisions and standards in force.
Warning: This appliance must be earthed.
This appliance operates from a 3 pin 13 amp plug. The voltage rating is 230 volt
and should be protected by a 13 Amp fuse either in the plug or distribution board.
24
Electrical connection
Advertisement
Table of Contents
