Table of Contents
Advertisement
Figure 20
Figure 21
L
Figure 22
Figure 23
H
REMOVAL OF THE INNER GLASS
DOOR PANEL
The inner glass door panel can easily be
removed for cleaning by unscrewing the two
screws (figure 20).
During re-assembly, ensure that the inner glass
is correctly aligned and do not over tighten
the screws.
REMOVING THE OVEN DOOR
Please operate as follows:
Open the door completely.
Push down the lever "L" and, keeping it in
this position, slowly close the door in order
to lock the hinge (Fig. 21).
Grip the door (as indicated in fig. 22) and,
while closing it, release the two hinges as
shown in fig. 23.
REASSEMBLING THE OVEN
DOOR
Grip the door with your hands placed near
the hinges and raise the levers "H" with
your forefingers (fig. 23).
– Insert the hinges in position until the notch on
lever "H" is firmly hooked on the bottom of the
hinge aperture.
– Open the door completely to release levers
"L".
– If the door is out of line or does not close
properly the hinges are not sitting properly.
Start again from figure 21.
19
Advertisement
Table of Contents
