Table of Contents
Advertisement
For the installer
OVEN INSTALLATION
All our ovens are designed for being easily built in - whether in masonry or a cabinet
made of wood, laminated plastic or metal, provided it is heat resistant.
The oven can be installed either into a tall housing unit or built under the working
surface into a kitchen base unit.
The unit should have an aperture according to the measurements as detailed in figures
24 and 25.
The oven should then be secured by 4 screws fitted into the holes provided at the
sides of the oven.
WARNING!
We would point out that the adhesive which bonds the plastic laminate to the
furniture must withstand temperatures not less than 150°C to avoid delamination.
This appliance is type X installation.
Figure 25
Figure 24
22
Advertisement
Table of Contents
