Table of Contents
Advertisement
AUTOMATIC OVEN
COOKING
To cook food automatically in the oven,
it is necessary to:
1.Set the length of the cooking time
2.Set the end of the cooking time
3.Set the temperature and the oven
cooking programme.
These operations are done in the
following way:
1.Set the length of the cooking time by
pushing the
button to advance, or
if you have passed the desired time
(fig. 10). The AUTO and the
symbol will be on.
2.Set the end of the cooking time by
pressing the
time already added to the clock time
will appear), and the
13); if you pass the desired time you
may get back by pushing the
button.
After this setting, the
go off. If after this setting, the AUTO
flashes on the panel and a buzzer
goes off, it means there was an error
in the programming.
In this case, modify the end of
cooking time or the cooking time
itself by following the above
instructions again.
Figure 10
A
U
T
O
button and the
to go back
button (the cooking
button (fig.
symbol will
3.Set the temperature and the cooking
programme by using the switch and
thermostat knobs of the oven (see
specific chapters).
Now the oven is programmed and
everything will work automatically, that
is the oven will turn on at the right
moment to end the cooking at the
established time.
During cooking, the
remains on.
By pushing the
the time that remains until the end of
cooking.
The cooking programme may be
cancelled in any moment by pushing
.
At the end of the cooking time the
oven will turn off automatically, the
symbol will turn off, AUTO will flash
and a buzzer will sound, which can be
turned off by pushing any of the bot-
tons.
Turn the switch and thermostat knobs
to zero and put the programmer onto
"manual" by pressing the
Attention: A power cut makes the
clock go to zero and cancels the set
programs.
After a power cut three zeroes will flash
on the panel.
Figure 11
A
U
T
O
symbol
button you can see
button.
11
Advertisement
Table of Contents
